2005 POWER INDUCTORS High-Reliability Power Inductors ML319PZA ■ High temperature material allows operation in ambient temperatures up to 155°C ■ Lowest profile, ultra-miniature, magnetically shielded power inductor; only 0.5 mm high, 2 mm × 2 mm footprint ■ Soft saturation makes them ideal for VRM/VRD applications. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Composite Terminations Tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Weight 8.4 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000/7″reel Plastic tape: 8 mm wide, 0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth Part number1 ML319PZA151MSZ ML319PZA221MSZ ML319PZA331MSZ ML319PZA471MSZ ML319PZA681MSZ Inductance2 ±20% (µH) 0.15 0.22 0.33 0.47 0.68 DCR (Ohms)3 nom max 0.085 0.098 0.111 0.128 0.144 0.166 0.177 0.204 0.215 0.247 SRF typ4 (MHz) 590 480 380 275 220 10% drop 1.05 0.72 0.65 0.60 0.50 Isat (A)5 Irms (A)6 20% drop 30% drop 20°C rise 40°C rise 1.55 1.90 1.25 1.60 1.20 1.50 1.13 1.48 1.05 1.30 1.00 1.30 0.97 1.20 0.95 1.25 0.75 0.95 0.80 1.05 1. When ordering, please specify testing code: ML319PZA681MSZ Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 0.079 ±0.008 2,0 ±0,2 Testing: 0.075 ±0.008 1,9 ±0,2 0.014 min 0,35 Dimensions are in © Coilcraft, Inc. 2012 0.087 2,2 0.041 1,04 inches mm Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 0.057 1,45 0.030 max 0,75 0.069 max 1,75 ® Recommended Suggested Land Pattern 0.020 max 0,50 Document ML779-1 Phone 800-981-0363 Fax 847-639-1508 Revised 04/18/12 E-mail [email protected] Web www.coilcraft-cps.com 2005 POWER INDUCTORS ML319PZA Series (2005) L vs Current L vs Frequency 1 1 0.8 0.7 0.8 0.7 0.68 µH 0.6 0.5 Inductance (µH) Inductance (µH) 0.6 0.68 µH 0.47 µH 0.4 0.33 µH 0.3 0.22 µH 0.2 0.47 µH 0.5 0.4 0.33 µH 0.3 0.22 µH 0.2 0.15 µH 0.15 µH 0.1 0.1 0.01 1 0.1 10 0.1 10 1 Current (A) ESR vs Frequency Irms Derating 120 25 110 15 10 5 100 90 80 70 60 50 40 25°C 20 Percent of rated Irms 0.68 µH 0.47 µH 0.33 µH 0.22 µH 0.15 µH Equivalent Series Resistance (Ohms) 1000 100 Frequency (MHz) 30 20 10 0 0.1 10 1 100 0 20 Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 -20 40 60 80 100 120 140 160 Ambient temperature (°C) Frequency (MHz) ® 0 -55 -40 Document ML779-2 Phone 800-981-0363 Fax 847-639-1508 Revised 04/18/12 E-mail [email protected] Web www.coilcraft-cps.com