MUN5211DW1T1 Series Preferred Devices Dual Bias Resistor Transistors NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. These digital transistors are designed to replace a single device and its external resistor bias network. The BRT eliminates these individual components by integrating them into a single device. In the MUN5211DW1T1 series, two BRT devices are housed in the SOT−363 package which is ideal for low power surface mount applications where board space is at a premium. Features • • • • http://onsemi.com (3) (2) R1 Q2 R2 (4) 1 Symbol Value Unit Collector-Base Voltage VCBO 50 Vdc Collector-Emitter Voltage VCEO 50 Vdc IC 100 mAdc SOT−363 CASE 419B STYLE 1 Symbol Max Unit PD 187 (Note 1) 256 (Note 2) 1.5 (Note 1) 2.0 (Note 2) mW MARKING DIAGRAM 6 THERMAL CHARACTERISTICS Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance, Junction-to-Ambient Characteristic (Both Junctions Heated) Total Device Dissipation TA = 25°C Derate above 25°C (6) 6 (TA = 25°C unless otherwise noted, common for Q1 and Q2) Characteristic (One Junction Heated) R1 (5) MAXIMUM RATINGS Collector Current R2 Q1 Simplifies Circuit Design Reduces Board Space Reduces Component Count Pb−Free Packages are Available Rating (1) mW/°C RqJA 670 (Note 1) 490 (Note 2) °C/W Symbol Max Unit PD 250 (Note 1) 385 (Note 2) 2.0 (Note 1) 3.0 (Note 2) mW mW/°C Thermal Resistance, Junction-to-Ambient RqJA 493 (Note 1) 325 (Note 2) °C/W Thermal Resistance, Junction-to-Lead RqJL 188 (Note 1) 208 (Note 2) °C/W xx M G G 1 xx = Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. DEVICE MARKING INFORMATION See specific marking information in the device marking table on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Junction and Storage Temperature TJ, Tstg −55 to +150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. FR−4 @ Minimum Pad 2. FR−4 @ 1.0 x 1.0 inch Pad © Semiconductor Components Industries, LLC, 2005 December, 2005 − Rev. 7 1 Publication Order Number: MUN5211DW1T1/D MUN5211DW1T1 Series DEVICE MARKING AND RESISTOR VALUES Package Marking R1 (K) R2 (K) Shipping † MUN5211DW1T1 SOT−363 7A 10 10 3000/Tape & Reel MUN5211DW1T1G SOT−363 (Pb−Free) 7A 10 10 3000/Tape & Reel MUN5212DW1T1 SOT−363 7B 22 22 3000/Tape & Reel MUN5212DW1T1G SOT−363 (Pb−Free) 7B 22 22 3000/Tape & Reel MUN5213DW1T1 SOT−363 7C 47 47 3000/Tape & Reel MUN5213DW1T1G SOT−363 (Pb−Free) 7C 47 47 3000/Tape & Reel MUN5214DW1T1 SOT−363 7D 10 47 3000/Tape & Reel MUN5214DW1T1G SOT−363 (Pb−Free) 7D 10 47 3000/Tape & Reel MUN5215DW1T1 SOT−363 7E 10 ∞ 3000/Tape & Reel MUN5215DW1T1G SOT−363 (Pb−Free) 7E 10 ∞ 3000/Tape & Reel MUN5216DW1T1 SOT−363 7F 4.7 ∞ 3000/Tape & Reel MUN5216DW1T1G SOT−363 (Pb−Free) 7F 4.7 ∞ 3000/Tape & Reel MUN5230DW1T1 SOT−363 7G 1.0 1.0 3000/Tape & Reel MUN5230DW1T1G SOT−363 (Pb−Free) 7G 1.0 1.0 3000/Tape & Reel MUN5231DW1T1 SOT−363 7H 2.2 2.2 3000/Tape & Reel MUN5231DW1T1G SOT−363 (Pb−Free) 7H 2.2 2.2 3000/Tape & Reel MUN5232DW1T1 SOT−363 7J 4.7 4.7 3000/Tape & Reel MUN5232DW1T1G SOT−363 (Pb−Free) 7J 4.7 4.7 3000/Tape & Reel MUN5233DW1T1 SOT−363 7K 4.7 47 3000/Tape & Reel MUN5233DW1T1G SOT−363 (Pb−Free) 7K 4.7 47 3000/Tape & Reel MUN5234DW1T1 SOT−363 7L 22 47 3000/Tape & Reel MUN5234DW1T1G SOT−363 (Pb−Free) 7L 22 47 3000/Tape & Reel MUN5235DW1T1 SOT−363 7M 2.2 47 3000/Tape & Reel MUN5235DW1T1G SOT−363 (Pb−Free) 7M 2.2 47 3000/Tape & Reel MUN5236DW1T1 SOT−363 7N 100 100 3000/Tape & Reel MUN5236DW1T1G SOT−363 (Pb−Free) 7N 100 100 3000/Tape & Reel MUN5237DW1T1 SOT−363 7P 47 22 3000/Tape & Reel MUN5237DW1T1G SOT−363 (Pb−Free) 7P 47 22 3000/Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 MUN5211DW1T1 Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, common for Q1 and Q2) Characteristic Symbol Min Typ Max Unit Collector-Base Cutoff Current (VCB = 50 V, IE = 0) ICBO − − 100 nAdc Collector-Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO − − 500 nAdc Emitter-Base Cutoff Current (VEB = 6.0 V, IC = 0) IEBO − − − − − − − − − − − − − − − − − − − − − − − − − − − − 0.5 0.2 0.1 0.2 0.9 1.9 4.3 2.3 1.5 0.18 0.13 0.2 0.05 0.13 mAdc Collector-Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO 50 − − Vdc Collector-Emitter Breakdown Voltage (Note 3) (IC = 2.0 mA, IB = 0) V(BR)CEO 50 − − Vdc hFE 35 60 80 80 160 160 3.0 8.0 15 80 80 80 80 80 60 100 140 140 350 350 5.0 15 30 200 150 140 150 140 − − − − − − − − − − − − − − OFF CHARACTERISTICS MUN5211DW1T1, G MUN5212DW1T1, G MUN5213DW1T1, G MUN5214DW1T1, G MUN5215DW1T1, G MUN5216DW1T1, G MUN5230DW1T1, G MUN5231DW1T1, G MUN5232DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G MUN5235DW1T1, G MUN5236DW1T1, G MUN5237DW1T1, G 3. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0% ON CHARACTERISTICS (Note 4) DC Current Gain (VCE = 10 V, IC = 5.0 mA) MUN5211DW1T1, G MUN5212DW1T1, G MUN5213DW1T1, G MUN5214DW1T1, G MUN5215DW1T1, G MUN5216DW1T1, G MUN5230DW1T1, G MUN5231DW1T1, G MUN5232DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G MUN5235DW1T1, G MUN5236DW1T1, G MUN5237DW1T1, G http://onsemi.com 3 MUN5211DW1T1 Series Collector-Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA) (IC = 10 mA, IB = 5 mA) (IC = 10 mA, IB = 1 mA) Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW) (VCC = 5.0 V, (VCC = 5.0 V, (VCC = 5.0 V, VB = 3.5 V, RL = 1.0 kW) VB = 5.5 V, RL = 1.0 kW) VB = 4.0 V, RL = 1.0 kW) VCE(sat) MUN5211DW1T1, G MUN5212DW1T1, G MUN5213DW1T1, G MUN5214DW1T1, G MUN5235DW1T1, G MUN5236DW1T1, G MUN5230DW1T1, G MUN5231DW1T1, G MUN5237DW1T1, G MUN5215DW1T1, G MUN5216DW1T1, G MUN5232DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G Vdc − − − − − − − − − − − − − − − − − − − − − − − − − − − − 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 − − − − − − − − − − − − − − − − − − − − − − − − − − − − 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 VOL MUN5211DW1T1, G MUN5212DW1T1, G MUN5214DW1T1, G MUN5215DW1T1, G MUN5216DW1T1, G MUN5230DW1T1, G MUN5231DW1T1, G MUN5232DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G MUN5235DW1T1, G MUN5213DW1T1, G MUN5236DW1T1, G MUN5237DW1T1, G 4. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0% http://onsemi.com 4 Vdc MUN5211DW1T1 Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, common for Q1 and Q2) (Continued) Characteristic Symbol Min Typ Max 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 − − − − − − − − − − − − − − − − − − − − − − − − − − − − 7.0 15.4 32.9 7.0 7.0 3.3 0.7 1.5 3.3 3.3 15.4 1.54 70 32.9 10 22 47 10 10 4.7 1.0 2.2 4.7 4.7 22 2.2 100 47 13 28.6 61.1 13 13 6.1 1.3 2.9 6.1 6.1 28.6 2.86 130 61.1 0.8 0.17 − 0.8 0.055 0.38 0.038 1.7 1.0 0.21 − 1.0 0.1 0.47 0.047 2.1 1.2 0.25 − 1.2 0.185 0.56 0.056 2.6 Unit ON CHARACTERISTICS (Note 5) (Continued) Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW) VOH (VCC = 5.0 V, VB = 0.050 V, RL = 1.0 kW) (VCC = 5.0 V, VB = 0.25 V, RL = 1.0 kW) Input Resistor MUN5211DW1T1, G MUN5212DW1T1, G MUN5213DW1T1, G MUN5214DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G MUN5235DW1T1, G MUN5230DW1T1, G MUN5215DW1T1, G MUN5216DW1T1, G MUN5231DW1T1, G MUN5232DW1T1, G MUN5236DW1T1, G MUN5237DW1T1, G MUN5211DW1T1, G MUN5212DW1T1, G MUN5213DW1T1, G MUN5214DW1T1, G MUN5215DW1T1, G MUN5216DW1T1, G MUN5230DW1T1, G MUN5231DW1T1, G MUN5232DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G MUN5235DW1T1, G MUN5236DW1T1, G MUN5237DW1T1, G Resistor Ratio MUN5211DW1T1, G/MUN5212DW1T1, G/ MUN5213DW1T1, G/MUN5236DW1T1, G MUN5214DW1T1, G MUN5215DW1T1, G/MUN5216DW1T1, G MUN5230DW1T1, G/MUN5231DW1T1, G/MUN5232DW1T1, G MUN5233DW1T1, G MUN5234DW1T1, G MUN5235DW1T1, G MUN5237DW1T1, G R1 Vdc R1/R2 5. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0% ALL MUN5211DW1T1 SERIES DEVICES PD, POWER DISSIPATION (mW) 300 250 200 150 100 50 0 −50 RqJA = 833°C/W 0 50 100 TA, AMBIENT TEMPERATURE (°C) Figure 1. Derating Curve http://onsemi.com 5 150 kW MUN5211DW1T1 Series 1 1000 IC/IB = 10 hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5211DW1T1 TA=−25°C 25°C 0.1 75°C 0 20 40 IC, COLLECTOR CURRENT (mA) TA=75°C 25°C −25°C 100 0.01 0.001 VCE = 10 V 10 50 1 10 IC, COLLECTOR CURRENT (mA) Figure 2. VCE(sat) versus IC Figure 3. DC Current Gain 100 IC, COLLECTOR CURRENT (mA) 2 1 0 0 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) 25°C 75°C f = 1 MHz IE = 0 V TA = 25°C 1 0.1 0.01 0.001 50 TA=−25°C 10 VO = 5 V 0 1 2 5 6 7 3 4 Vin, INPUT VOLTAGE (VOLTS) 10 VO = 0.2 V TA=−25°C 25°C 75°C 1 0.1 0 10 8 9 Figure 5. Output Current versus Input Voltage Figure 4. Output Capacitance V in , INPUT VOLTAGE (VOLTS) C ob, CAPACITANCE (pF) 4 3 100 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 6. Input Voltage versus Output Current http://onsemi.com 6 50 10 MUN5211DW1T1 Series 1000 1 hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5212DW1T1 IC/IB = 10 25°C TA=−25°C 0.1 75°C 0.01 0.001 0 20 40 IC, COLLECTOR CURRENT (mA) TA=75°C 25°C −25°C 100 10 50 VCE = 10 V 1 IC, COLLECTOR CURRENT (mA) Figure 7. VCE(sat) versus IC Figure 8. DC Current Gain 100 IC, COLLECTOR CURRENT (mA) f = 1 MHz IE = 0 V TA = 25°C 2 1 75°C 25°C TA=−25°C 10 1 0.1 0.01 VO = 5 V 0 0 0.001 50 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) Figure 9. Output Capacitance 0 2 4 6 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=−25°C 10 25°C 75°C 1 0.1 0 10 8 10 Figure 10. Output Current versus Input Voltage 100 V in , INPUT VOLTAGE (VOLTS) C ob , CAPACITANCE (pF) 4 3 100 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Figure 11. Input Voltage versus Output Current http://onsemi.com 7 MUN5211DW1T1 Series 10 1000 IC/IB = 10 1 25°C TA=−25°C 0.01 0 25°C −25°C 10 50 20 40 IC, COLLECTOR CURRENT (mA) TA=75°C 100 75°C 0.1 VCE = 10 V hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5213DW1T1 1 10 IC, COLLECTOR CURRENT (mA) Figure 12. VCE(sat) versus IC 1 100 IC, COLLECTOR CURRENT (mA) 0.4 TA=−25°C 10 1 0.1 0.01 0.2 0 25°C 75°C 0.6 0 10 20 30 40 VR, REVERSE BIAS VOLTAGE (VOLTS) 0.001 50 Figure 14. Output Capacitance VO = 5 V 0 2 4 6 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=−25°C 10 25°C 75°C 1 0.1 0 10 8 10 Figure 15. Output Current versus Input Voltage 100 V in , INPUT VOLTAGE (VOLTS) C ob , CAPACITANCE (pF) Figure 13. DC Current Gain f = 1 MHz IE = 0 V TA = 25°C 0.8 100 20 30 40 IC, COLLECTOR CURRENT (mA) 50 Figure 16. Input Voltage versus Output Current http://onsemi.com 8 MUN5211DW1T1 Series 1 300 IC/IB = 10 hFE , DC CURRENT GAIN (NORMALIZED) VCE(sat) , COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5214DW1T1 TA=−25°C 25°C 0.1 75°C 0.01 0.001 0 20 40 60 IC, COLLECTOR CURRENT (mA) TA=75°C VCE = 10 250 25°C 200 −25°C 150 100 50 0 80 1 2 4 6 Figure 17. VCE(sat) versus IC 100 f = 1 MHz lE = 0 V TA = 25°C 3 TA=75°C IC, COLLECTOR CURRENT (mA) 3.5 2.5 2 1.5 1 0.5 0 2 4 6 8 10 15 20 25 30 35 VR, REVERSE BIAS VOLTAGE (VOLTS) 40 45 25°C −25°C 10 VO = 5 V 1 50 Figure 19. Output Capacitance 0 2 4 6 Vin, INPUT VOLTAGE (VOLTS) VO = 0.2 V TA=−25°C 25°C 75°C 1 0.1 0 10 8 Figure 20. Output Current versus Input Voltage 10 V in , INPUT VOLTAGE (VOLTS) Cob , CAPACITANCE (pF) 90 100 Figure 18. DC Current Gain 4 0 8 10 15 20 40 50 60 70 80 IC, COLLECTOR CURRENT (mA) 20 30 IC, COLLECTOR CURRENT (mA) 40 50 Figure 21. Input Voltage versus Output Current http://onsemi.com 9 10 MUN5211DW1T1 Series 1 1000 IC/IB = 10 75°C 0.1 −25°C 25°C 0.01 0.001 30 20 40 10 IC, COLLECTOR CURRENT (mA) 0 25°C 10 1 50 TA = −25°C 100 1 10 IC, COLLECTOR CURRENT (mA) Figure 22. VCE(sat) versus IC 100 Figure 23. DC Current Gain 100 4 IC, COLLECTOR CURRENT (mA) 4.5 f = 1 MHz IE = 0 V TA = 25°C 3.5 3 2.5 2 1.5 1 0.5 75°C 10 25°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 0 50 Figure 24. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 1 25°C 75°C VO = 0.2 V 0.1 0 9 10 Figure 25. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) VCE = 10 V 75°C hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5215DW1T1 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 26. Input Voltage versus Output Current http://onsemi.com 10 50 MUN5211DW1T1 Series 1 1000 75°C 0.1 −25°C 25°C 0.01 0.001 30 20 40 10 IC, COLLECTOR CURRENT (mA) 0 TA = −25°C 10 1 50 25°C 100 1 10 IC, COLLECTOR CURRENT (mA) Figure 27. VCE(sat) versus IC 100 IC, COLLECTOR CURRENT (mA) f = 1 MHz IE = 0 V TA = 25°C 4 3.5 100 Figure 28. DC Current Gain 4.5 3 2.5 2 1.5 1 0.5 75°C 10 25°C TA = −25°C 1 0.1 0.01 VO = 5 V 0.001 0 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 0 50 Figure 29. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 1 25°C 75°C VO = 0.2 V 0.1 0 9 10 Figure 30. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) VCE = 10 V 75°C IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5216DW1T1 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 31. Input Voltage versus Output Current http://onsemi.com 11 50 MUN5211DW1T1 Series 100 1 IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5230DW1T1 75°C 0.1 −25°C 25°C 0.01 0.001 30 10 20 40 IC, COLLECTOR CURRENT (mA) 0 75°C 10 25°C TA = −25°C VCE = 10 V 1 50 1 10 IC, COLLECTOR CURRENT (mA) Figure 32. VCE(sat) versus IC Figure 33. DC Current Gain 4.5 IC, COLLECTOR CURRENT (mA) 100 4 f = 1 MHz IE = 0 V TA = 25°C 3.5 3 2.5 2 1.5 1 0.5 0 75°C 10 25°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 34. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 75°C 1 25°C VO = 0.2 V 0.1 0 9 10 Figure 35. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 100 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 36. Input Voltage versus Output Current http://onsemi.com 12 50 MUN5211DW1T1 Series 100 1 IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5231DW1T1 75°C 0.1 −25°C 25°C 0.01 0.001 30 10 20 40 IC, COLLECTOR CURRENT (mA) 0 TA = −25°C VCE = 10 V 1 50 1 10 IC, COLLECTOR CURRENT (mA) Figure 37. VCE(sat) versus IC 100 Figure 38. DC Current Gain 4.5 IC, COLLECTOR CURRENT (mA) 100 4 f = 1 MHz IE = 0 V TA = 25°C 3.5 3 2.5 2 1.5 1 0.5 0 75°C 10 25°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 39. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 75°C 1 25°C VO = 0.2 V 0.1 0 9 10 Figure 40. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 25°C 75°C 10 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 41. Input Voltage versus Output Current http://onsemi.com 13 50 MUN5211DW1T1 Series 1000 1 VCE = 10 V IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5232DW1T1 75°C 0.1 −25°C 25°C 0.01 0.001 30 10 20 40 IC, COLLECTOR CURRENT (mA) 0 TA = −25°C 10 1 50 75°C 100 1 10 IC, COLLECTOR CURRENT (mA) Figure 42. VCE(sat) versus IC 100 Figure 43. DC Current Gain 100 IC, COLLECTOR CURRENT (mA) 6 f = 1 MHz IE = 0 V TA = 25°C 5 4 3 2 1 0 75°C 10 25°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 44. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 1 75°C 25°C VO = 0.2 V 0.1 0 9 10 Figure 45. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 25°C 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 46. Input Voltage versus Output Current http://onsemi.com 14 50 MUN5211DW1T1 Series 1000 1 VCE = 10 V IC/IB = 10 0.1 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5233DW1T1 75°C −25°C 25°C 0.01 0.001 5 0 20 10 15 25 IC, COLLECTOR CURRENT (mA) 75°C 25°C 10 1 30 TA = −25°C 100 1 10 IC, COLLECTOR CURRENT (mA) Figure 47. VCE(sat) versus IC Figure 48. DC Current Gain 4 IC, COLLECTOR CURRENT (mA) 100 3.5 f = 1 MHz IE = 0 V TA = 25°C 3 2.5 2 1.5 1 0.5 0 75°C 10 25°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 49. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 1 75°C 25°C VO = 0.2 V 0.1 0 9 10 Figure 50. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 100 5 10 15 20 IC, COLLECTOR CURRENT (mA) Figure 51. Input Voltage versus Output Current http://onsemi.com 15 25 MUN5211DW1T1 Series 1000 1 VCE = 10 V IC/IB = 10 0.1 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5234DW1T1 75°C −25°C 25°C 0.01 0.001 0 5 20 10 15 25 IC, COLLECTOR CURRENT (mA) 75°C 100 25°C 10 1 30 TA = −25°C 1 100 IC, COLLECTOR CURRENT (mA) Figure 53. DC Current Gain TBD TBD VR, REVERSE BIAS VOLTAGE (VOLTS) Vin, INPUT VOLTAGE (VOLTS) Figure 54. Output Capacitance Figure 55. Output Current versus Input Voltage Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) Figure 52. VCE(sat) versus IC 10 IC, COLLECTOR CURRENT (mA) TBD IC, COLLECTOR CURRENT (mA) Figure 56. Input Voltage versus Output Current http://onsemi.com 16 MUN5211DW1T1 Series 1000 1 VCE = 10 V IC/IB = 10 75°C hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5235DW1T1 75°C 0.1 −25°C 25°C 0.01 0.001 30 10 20 40 IC, COLLECTOR CURRENT (mA) 0 100 1 10 IC, COLLECTOR CURRENT (mA) Figure 57. VCE(sat) versus IC 100 Figure 58. DC Current Gain 4.5 IC, COLLECTOR CURRENT (mA) 100 4 f = 1 MHz IE = 0 V TA = 25°C 3.5 3 2.5 2 1.5 1 0.5 0 25°C 10 75°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 59. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) 75°C 1 25°C TA = −25°C VO = 0.2 V 0.1 0 9 10 Figure 60. Output Current versus Input Voltage 10 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 25°C 10 1 50 TA = −25°C 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 61. Input Voltage versus Output Current http://onsemi.com 17 50 MUN5211DW1T1 Series 1000 1 VCE = 10 V −25°C IC/IB = 10 75°C 75°C hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5236DW1T1 25°C 0.1 0.01 0.001 30 10 20 40 IC, COLLECTOR CURRENT (mA) 0 100 25°C 10 1 50 TA = −25°C 1 10 IC, COLLECTOR CURRENT (mA) Figure 62. VCE(sat) versus IC Figure 63. DC Current Gain 5 IC, COLLECTOR CURRENT (mA) 100 4.5 f = 1 MHz IE = 0 V TA = 25°C 4 3.5 3 2.5 2 1.5 1 0.5 0 75°C 10 1 25°C TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 64. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 10 75°C 25°C 1 VO = 0.2 V 0.1 0 9 10 Figure 65. Output Current versus Input Voltage 100 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 100 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 66. Input Voltage versus Output Current http://onsemi.com 18 50 MUN5211DW1T1 Series 1000 1 VCE = 10 V IC/IB = 10 −25°C 75°C 0.1 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS — MUN5237DW1T1 25°C 0.01 0.001 30 10 20 40 IC, COLLECTOR CURRENT (mA) 0 75°C 100 25°C 10 1 50 TA = −25°C 1 10 IC, COLLECTOR CURRENT (mA) Figure 67. VCE(sat) versus IC Figure 68. DC Current Gain 5 IC, COLLECTOR CURRENT (mA) 100 4.5 f = 1 MHz IE = 0 V TA = 25°C 4 3.5 3 2.5 2 1.5 1 0.5 0 75°C 10 25°C 1 TA = −25°C 0.1 0.01 VO = 5 V 0.001 0 5 10 15 20 25 30 35 40 45 VR, REVERSE BIAS VOLTAGE (VOLTS) 50 0 Figure 69. Output Capacitance 1 2 3 4 5 6 7 8 Vin, INPUT VOLTAGE (VOLTS) TA = −25°C 10 75°C 25°C 1 VO = 0.2 V 0.1 0 9 10 Figure 70. Output Current versus Input Voltage 100 Vin, INPUT VOLTAGE (VOLTS) Cob, CAPACITANCE (pF) 100 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 71. Input Voltage versus Output Current http://onsemi.com 19 50 MUN5211DW1T1 Series PACKAGE DIMENSIONS SC−88 (SOT−363) CASE 419B−02 ISSUE V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B−01 OBSOLETE, NEW STANDARD 419B−02. D e 6 5 4 1 2 3 HE DIM A A1 A3 b C D E e L HE −E− b 6 PL 0.2 (0.008) M E M STYLE 1: PIN 1. 2. 3. 4. 5. 6. A3 C A A1 MILLIMETERS MIN NOM MAX 0.80 0.95 1.10 0.00 0.05 0.10 0.20 REF 0.10 0.21 0.30 0.10 0.14 0.25 1.80 2.00 2.20 1.15 1.25 1.35 0.65 BSC 0.10 0.20 0.30 2.00 2.10 2.20 EMITTER 2 BASE 2 COLLECTOR 1 EMITTER 1 BASE 1 COLLECTOR 2 L SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 20 INCHES NOM MAX 0.037 0.043 0.002 0.004 0.008 REF 0.004 0.008 0.012 0.004 0.005 0.010 0.070 0.078 0.086 0.045 0.049 0.053 0.026 BSC 0.004 0.008 0.012 0.078 0.082 0.086 MIN 0.031 0.000 MUN5211DW1T1 Series ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 21 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MUN5211DW1T1/D