AVAGO HSMG-C660 Right angle surface mount chip led Datasheet

HSMx - C660
Right Angle Surface Mount Chip LEDs
Data Sheet
Description
Package Dimensions
The HSMx-C660 series of chip-type LEDs are designed to
illuminate at a right angle to the direction of mounting.
When mounted on a PC board, these devices will emit
light in a direction parallel to the board.
CATHODE
ANODE
3.0
1.0
The small 3.0 x 2.0 mm footprint of the HSMx-C660 is
designed for applications where space is limited. These
devices are available in four colors and use untinted,
non-diffused optics.
0.3
The HSMx-C660 series of parts are compatible with IR
reflow soldering process only.
2.0
2.0
Features
•
•
•
•
Right Angle Mounting
Compatible with IR Reflow Soldering Process
Available in a Wide Variety of Colors
Available in 8 mm Tape on 178 mm (7") Diameter
Reels
LCD Backlighting
Keypad Side/Backlighting
Light Piping
Right Angle Indicator
Footprint
(mm)
3.0 x 2.0 x 1.0
1.0
0.25
0.25
0.88
CATHODE
Applications
•
•
•
•
0.3
Parts
per Reel
3000
ANODE
POLARITY MARK
R 0.45
TO REINFORCE SOLDERING�
(NON-PIN CONNECTION)
DH AS
AlGaAs
HSMH-C660
High
Efficiency Red
HSMS-C660
HSMX-S660 Pkg Dimension C660
Yellow
HSMY-C660
Green
HSMG-C660
Absolute Maximum Ratings at TA = 25°C
Parameter
DC Forward Current[1]
HSMx-C660
25
Units
mA
Power Dissipation
65
mW
Reverse Voltage (IR = 100 µA)
5
V
Operating Temperature Range
–30 to +85
°C
Storage Temperature Range[2]
–40 to +100
°C
Notes:
1. Derate linearly as shown on Figure 4.
Optical Characteristics at TA = 25°C
Luminous
Intensity Iv
(mcd) @
IF = 20 mA
Min. Typ.
Peak
Wavelength
λpeak (nm)
Typ.
Color
Dominant
Wavelength
λd[1] (nm)
Typ.
Viewing
Angle
2θ1/2
(degrees)[2]
Typ.
Luminous
Efficacy
ηv
(lm/W)
6.3
650
Part No.
Color
HSMH-C660
DH AlGaAs
Red
639
155
80
HSMS-C660
High
Efficiency
1.6
5.0
639
626
Red
155
145
HSMY-C660
Yellow
1.6
5.0
589
586
155
500
HSMG-C660
Green
4.0
9.0
570
572
155
595
16.0
Notes:
1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the
LED package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is ½ the peak intensity.
Electrical Characteristics at TA = 25°C
Forward
Voltage VF
(Volts) @
IF = 20 mA
Typ. Max.
Reverse
Breakdown
VR (Volts) @
IR = 100 µA
Min.
Capacitance C
(pF) VF = 0,
f = 1 MHz
Typ.
Thermal
Resistance
RθJ-PIN (°C/W)
1.8
2.2
5
4.5
300
Part No.
Color
HSMH-C660
DH AlGaAs
Red
HSMS-C660
High
Efficiency
Red
1.9
2.6
5
4.0
300
HSMY-C660
Yellow
2.1
2.6
5
3.0
300
HSMG-C660
Green
2.2
2.6
5
8.0
300
Light Intensity (Iv) Bin Limits [1]
Color Bin Limits (Green)
Bin ID
Dominant Wavelength (nm)
Minimum
Maximum
A
561.5
564.5
B
564.5
567.5
C
567.5
570.5
D
570.5
573.5
E
573.5
576.5
Tolerance : ± 1nm
Color Bin Limits (Yellow)
Bin ID
Dominant Wavelength (nm)
Bin ID
Intensity (mcd)
Minimum
Maximum
A
0.11
0.18
B
0.18
0.29
C
0.29
0.45
D
0.45
0.72
E
0.72
1.10
F
1.10
1.80
G
1.80
2.80
H
2.80
4.50
J
4.50
7.20
Minimum
Maximum
K
7.20
11.20
A
582.0
584.5
L
11.20
18.00
B
584.5
587.0
M
18.00
28.50
C
587.0
589.5
N
28.50
45.00
D
589.5
592.0
P
45.00
71.50
E
592.0
594.5
Q
71.50
112.50
F
594.5
597.0
R
112.50
180.00
S
180.00
285.00
T
285.00
450.00
Tolerance : ± 1nm
Color Bin Limits (AlGaAs Red)
Bin ID
-
Dominant Wavelength (nm)
Minimum
Maximum
630.0
650.0
Tolerance : ± 1nm
Color Bin Limits (High Efficiency Red)
Bin ID
Tolerance : ± 1nm
Dominant Wavelength (nm)
Minimum
Maximum
615.0
630.0
Tolerance : ±15% Notes:
1. Bin categories are established for classifi-cation of products. Products may not be available in all categories. Please contact your Avago
representative for information on current available bins.
RELATIVE INTENSITY
1.0
AlGaAs RED
GREEN
HIGH EFFICIENCY RED
0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative Intensity vs. Wavelength.
1.6
AlGaAs�
RED
20
15
HER
GREEN
10
5
0
1.0
1.5
2.0
2.5
3.0
30
1.4
IF – FORWARD CURRENT – mA
YELLOW
25
RELATIVE LUMINOUS INTENSITY�
(NORMALIZED AT 20 mA)
IE – FORWARD CURRENT – mA
30
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
10
15
Figure 2. Forward Current vs. Forward
Voltage.
Figure 3. Relative Luminous Intensity vs.
DC Forward Current.
HSMX-R661 fig 3
10
0
1.0
30
50
0.8
NORMALIZED INTENSITY
40
0.6
60
70
80
90
0.4
0.2
10 20 30 40 50 60 70 80 90 100
ANGULAR DISPLACEMENT – DEGREES
Figure 5. HSMx-C660 Intensity vs. Angle, Vertical Axis.
HSMX-S660 fig 5
25
IDC – DC FORWARD CURRENT – mA
VF – FORWARD VOLTAGE – V
20
20
25
20
15
10
5
0
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – C
Figure 4. Maximum DC Current vs. Ambient Temperature.
HSMX-R§§& fig 4
Figure 6. Recommended soldering land pattern.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified.
Figure 7. Recommended reflow soldering profile. USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 9. Reeling Orientation for the HSMx-C660.
HSMX-R661 fig 11
Figure 8. Recommended Pb-free reflow soldering profile.
8.0 ± 1.0 (0.315 ± 0.039)
10.50 ± 1.0 (0.413 ± 0.039)
Ø 20.20 MIN.
(Ø 0.795 MIN.)
Ø 13.1 ± 0.5
(Ø 0.516 ± 0.020)
3.0 ± 0.5
(0.118 ± 0.020)
59.60 ± 1.00
(2.346 ± 0.039)
178.40 ± 1.00
(7.024 ± 0.039)
4.0 ± 0.5
(0.157 ± 0.020)
6
PS
5.0 ± 0.5
(0.197 ± 0.020)
Figure 10. Reel Dimensions.
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
PART NUMBER
DIM.A
± 0.10 (0.004)
DIM. B
± 0.10 (0.004)
DIM. C
± 0.10 (0.004)
HSMx-C660
3.35 (0.132)
2.30 (0.091)
1.20 (0.047)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1mm (±0.004in.) unless otherwise specified.
Figure 11. Tape Dimensions.
END
THERE SHALL BE A
MINIMUM OF 40 mm
(1.57 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
START
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 40 mm
(1.57 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
150 mm-360 mm
(5.9 - 14.2 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 12. Tape Leader and Trailer Dimensions.
Reflow Soldering:
HSMX-R661 fig 14
For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator Components.
Storage Condition: 5 to 30°C @ 60%RH max.
Baking is required before mounting, if:
1. Humidity Indicator Card is > 10% when read at 23 ±
5°C.
2. Device expose to factory conditions <30°C/60%RH
more than 672 hours.
Recommended baking condition:
60±5°C for 20 hours.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5989-0165EN
AV01-0118EN -April 24, 2006
Similar pages