MMBD6050-G www.vishay.com Vishay Semiconductors Small Signal Switching Diode FEATURES • Silicon epitaxial planar diode 3 • Fast switching diode in case SOT-23, especially suited for automatic insertion. • AEC-Q101 qualified • Base P/N-G3 - green, commercial grade 1 2 MECHANICAL DATA Case: SOT-23 Weight: approx. 8.1 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box • Material categorization: For definitions of compliance www.vishay.com/doc?99912 please see 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART MMBD6050-G ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS MMBD6050-G3-08 or MMBD6050-G3-18 Single diode 5AG Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Continuous reverse voltage Forward current Peak forward surge current Maximum power dissipation on FR-5 board (1) Maximum power dissipation on alumina substrate (2) Derate above 25 °C Derate above 25 °C SYMBOL VALUE UNIT VR 70 V mA IF 200 IFSM 500 mA Ptot 225 mW Ptot 1.8 mW/°C Ptot 300 mW Ptot 2.4 mW/°C Notes (1) FR-5 = 1.0" x 0.75" x 0.062". (2) Alumina = 0.4" x 0.3" x 0.024" 99.5 % alumina THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE UNIT Thermal resistance FR-5 RthJA 556 °C/W Junction to ambient alumina RthJA 417 °C/W Tj 150 °C Storage temperature range Tstg - 55 to + 150 °C Operating temperature range Top - 55 to + 150 °C Maximum junction temperature Rev. 1.0, 15-May-13 TEST CONDITION Document Number: 85419 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBD6050-G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Reverse breakdown voltage Forward voltage Reverse leakage current Reverse recovery time Diode capacitance TEST CONDITION SYMBOL MIN. IR = 100 μA V(BR) 70 TYP. MAX. UNIT IF = 1 mA VF 0.55 0.7 V IF = 100 mA VF 0.85 1.1 V VR = 50 V IR 100 nA IF = IR = 10 mA, iR = 1 mA trr 4 ns VR = 0 CD 2.5 pF V TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10000 rf - Dynamic Forward Resistance (Ω) 10 1 1 10 IF - Forward Current (mA) 18861 Ptot - Admissible Power Dissipation ( mW ) Fig. 1 - Dynamic Forward Resistance vs. Forward Current 18889 500 400 300 200 100 0 0 20 40 60 80 100 120 140 160 180 200 Tamb - Ambient Temperature ( °C ) Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature Rev. 1.0, 15-May-13 T j = 25 ° C f = 1 kHz 1000 100 10 1 0.01 100 18662 0.1 1 10 IF - Forward Current (mA) 100 Fig. 3 - Dynamic Forward Resistance vs. Forward Current CD (VR)/CD (0 V) - Relative Capacitance (pF) rf - Dynamic Forward Resistance (Ω) 100 T j = 25 ° C f = 1 MHz 1.1 1.0 0.9 0.8 0.7 0 18664 2 4 6 8 10 VR - Reverse Voltage (V) Fig. 4 - Relative Capacitance vs. Reverse Voltage Document Number: 85419 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBD6050-G www.vishay.com Vishay Semiconductors I R - Leakage Current ( nA ) 10000 1000 100 10 VR = 20 V 1 0 20 18665 40 60 80 100 120 140 160 180 200 Tj - Junction Temperature ( ° C ) Fig. 5 - Leakage Current vs. Junction Temperature 100 Peak Forward Current ( A ) I FRM - Admissible Repetitive I 18666 10 ν= 0 ν = t p /T tp T = 1/f p I FRM t T 0.1 0.2 1 0.1 10 -5 0.5 10 -4 10 -3 10 -2 10 -1 1 10 tp - Pulse Length ( s ) Fig. 6 - Admissible Repetitive Peak Forward Current vs. Pulse Duration Rev. 1.0, 15-May-13 Document Number: 85419 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBD6050-G www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.0, 15-May-13 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Document Number: 85419 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000