Ordering number: EN5329 Monolithic Linear IC LA6540M 4-output Power Operational Amplifier Overview Package Dimensions The LA6540M is a 4-output power operational amplifier developed for use in consumer and industrial equipment. unit : mm 3097-MFP16FS [LA6540M] Functions . High output current (I max = 0.7 A : typ) . Includes a current limiter . Wide operating voltage range (±2 to ±16 V) . Single-supply operation possible (4 to 32 V) . Thermal shutdown built in O SANYO : MFP16FS Specifications Maximum Ratings at Ta = 25 °C Parameter Maximum supply voltage Symbol Ratings Unit ±18 V VIN ±17 V Input voltage Allowable power dissipation Conditions VCC/VEE 0.7 W Operating temperature Pd max Topr –20 to +75 °C Storage temperature Tstg –40 to +150 °C Operation Characteristics at Ta = 25 °C, VCC = +15 V, VEE = –15 V Parameter No-load current drain Input offset voltage Input offset current Input bias current Input common-mode voltage range Common-mode signal rejection ratio Maximum output voltage Slew rate Limiting current (built in) Symbol ICC VIO IIO IB Conditions min Mute OFF RS % 10 kΩ typ 15 2 10 50 VID –14 CMRR 60 75 ±11 ±12 0.15 0.7 VO SR ISC RL = 33 Ω RL = 33 Ω, R1 = 2.2 Ω, C1 = 0.1 µF 0.5 max 30 7 100 300 Unit mA mV nA nA +13 V dB V V/µs A SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 22896HA (II) No.5329-1/4 LA6540M Pin Assignment Sample Application Circuit No.5329-2/4 LA6540M Test Circuits No.5329-3/4 Allowable power dissipation, Pd max − W LA6540M Specifications of specified board 25 × 25 × 1.65 mm3 Material: Glass epoxy With specified board Copper foiled area: 100 mm2 Independent IC Ambient temperature, Ta — °C No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 1996. Specifications and information herein are subject to change without notice. No.5329-4/4