H HiTRON AC/DC EXTERNAL WALLMOUNT & DESKTOP ADAPTER UNIVERSAL OR USA INPUT SINGLE & DUAL OUTPUT 10-12 WATTS SWITCHING POWER SUPPLIES HES10 & HES10B SERIES FEATURES: UNIVERSAL INPUT WALLMOUNT OR DESKTOP ADAPTER DIVERSE AC PLUG AVAILABLE MEET UNIVERSAL SAFETY STANDARDS EMI MEET EN55022/FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage For HES10 Series: 90-264Vac typical. Input Voltage For HES10B Series: 90-132Vac typical. Input Connector for HES10 Series: Wallmount Format: WM0,1,2 (USA/Japan)/ WM3 (Euro-stecker)/ WM4 (Schuko-stecker)/ WM5(UK)/WM6, 6G(Australia). Desktop Format: IEC320 Inlet Type DT7-3P or DT8-2P. Mouse Power Pig-Tail: PT1/2/3/4/5/6/7. Input Connector for HES10B Series: WM1 (USA/Japan) only. Input Frequency: 47-63Hz. Inrush Current: 48A @230Vac or 27.8A @230Vac typical by adding thermister. Input Current: 0.3A@115Vac/0.10A@230Vac typical. Dielectric Withstand: Meet IEC60950. EMI: Meet EN55022 / FCC Class B. Hold-up Time: 15mS @115Vac or 60mS @230Vac typical. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 10-12Watts typical. Output Connector: Optional. Line Regulation: 0.1% typical. Load Regulation for HES10 and HES10B Single O/P: ±1.5-3.0% typical. Load Regulation for HES10 Series Dual O/P: Main O/P VO1 ±1.5-3.0% typical. Aux. O/P VO2 ±3.0-5.0% typical. Noise & Ripple: 1.0% typical peak to peak. OVP: Built-in, Zener diode clamp. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: 70-75% typical. Switching Frequency: HES10 approximate 40-50K Hz. HES10B approximate 50-200K Hz. Circuit Topology: Fixed Frequency Flyback ckt. for HES10 series. Free Running Flyback ckt. for HES10B series. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Power Density: 1.3-1.56Watts / Cubic inch. Operating Temperature: 0 to +25/35/40°C without derating. (various with output voltage) Storage Temperature: -20°C to +85°C. Temperature Coefficient: 0.04% /°C. Cooling: Free air convection. Construction: Impact resistant thermo- plastic enclosure case. Construction: Wallmount or Desktop Format. Safety Standard: Meet UL1950/EN60950, Class II. Class I available for WM2,5,6G /DT7/PT2,4,5,7. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. (4) Due to requests in market and advances in technology, specifications subject to change without notice. For the details of safety approval, please consult the factory. -7- HES10 SERIES MODEL NO. DESCRIPTION: HES10 – X X X YY – N – S AC PLUG TYPE: [0] WM0 (Fold-out ), [1] WM1, [2]WM2, [3]WM3, [4] WM4, [5] WM5, [6] WM6, [6G] WM6G [7] DT7 (IEC320 3-pin or 3L-pin), [8] DT8 (IEC320 2-pin). [A] PT1, [B] PT2, [C] PT3, [D] PT4 [E] PT5, [F] PT6, [G] PT7, SINGLE OUTPUT: [0] for no Aux. O/P. DUAL AUX. O/P SET:[A]+5V, [B]+12V, [C]+15V, [D]+18V, [E]+24V, [F]-5V, [G]-12V, [H]-15V, [I]-18V,[J]-24V OUTPUT CURRENT OUTPUT VOLTAGE SERIES NAME (HiTRON External Switcher): About 10W OUTPUT VOLTAGE/CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) 3.3 Vdc ≤ Any Voltage ≤ 12.0Vdc 12.0Vdc < Any Voltage ≤ 24.0Vdc OUTPUT VOLTAGE (Vdc) / CURRENT (A) 3.3V/2.5A, 3.4-5.0V/2.0A, 5.1-5.9V/1.9-1.7A, 6.0-6.3V/ 1.6A, 6.4-6.7V/1.6-1.5A, 6.8-7.2V/1.4A, 7.4-7.7V/1.3A, 7.8-8.4V/1.2A, 8.5-8.9V/1.1A, 9.0-12V/1.0A. Special: 6.0-6.5V/2.0A 12.1-13.3V/0.9A, 13.4-15.0V/0.8A, 15.1-17.1V/0.7A, 17.2-20.0V /0.6A, 20.1-24.0V/0.5A. Max. Output: 12.0 W. Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No. SINGLE OUTPUT (Model No. for examples. ) MODEL NO. HES10-03325-0-1 HES10-03420-0-3 HES10-05020-0-5 HES10-06016-0-6 HES10-12010-0-0 HES10-07014-0-7 HES10-08511-0-8 HES10-09010-0-A HES10-10010-0-B HES10-12010-0-C HES10-13808-0-D HES10-15008-0-E HES10-16007-0-F HES10-18006-0-G HES10-06020-0-0 HES10-06020-0-1 HES10-24005-0-2 AC INPUT 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac 90-264Vac AC PLUG WM1 WM3 WM5 WM6 WM0 DT7 DT8 PT1 PT2 PT3 PT4 PT5 PT6 PT7 WM0 WM1 WM2 O/P VOLTAGE 3.3Vdc 3.4Vdc 5.0Vdc 6.0Vdc 12.0Vdc 7.0Vdc 8.5Vdc 9.0Vdc 10.0Vdc 12.0Vdc 13.8Vdc 15.0Vdc 16.0Vdc 18.0Vdc 6.0Vdc 6.0Vdc 24.0Vdc O/P CURRENT 2.5A 2.0A 2.0A 1.6A 1.0A 1.4A 1.1A 1.0A 1.0A 1.0A 0.8A 0.8A 0.7A 0.6A 2.0A 2.0A 0.5A DUAL OUTPUT V/A CHART OUTPUT RAIL Main O/P VO1 Aux. O/P ±VO2 = OUTPUT VOLTAGE (Vdc) / CURRENT (A) 5.0V/1.0A, 5.1-5.9V/0.9A, 6.0-7.5V/0.8A, 7.6-9.0V/0.7A, 9.1-12.0V/0.6A, 12.1-14.0V/0.5A, 14.1-20.0V/0.4A. 5V/0.6A, 12V/0.3A, 15V/0.2A, 18V/0.2A, 24V/0.1A. Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No. -8- FORMAT Wallmount Wallmount Wallmount Wallmount Wallmount Desktop Desktop Mouse-PT Mouse-PT Mouse-PT Mouse-PT Mouse-PT Mouse-PT Mouse-PT Wallmount Wallmount Wallmount DUAL OUTPUT (Model No. for examples. ) MODEL NO. AC INPUT AC PLUG HES10-03310-A-1 90-264Vac WM1 MAIN O/P VO1 VOLT. TYP. 1.0A +3.3Vdc AUX. O/P VO2† VOLT. TYP. 0.6A + 5.0Vdc Wallmount HES10-05010-B-3 90-264Vac WM3 +5.0Vdc 1.0A +12.0Vdc 0.3A Wallmount HES10-05209-C-5 90-264Vac WM5 +5.2Vdc 0.9A +15.0Vdc 0.2A Wallmount HES10-06008-D-6 90-264Vac WM6 +6.0Vdc 0.8A +18.0Vdc 0.2A Wallmount HES10-09007-E-7 90-264Vac DT7 +9.0Vdc 0.7A +24.0Vdc 0.1A Desktop HES10-12006-F-A 90-264Vac PT1 +12.0Vdc 0.6A -5.0Vdc 0.6A Mouse PT HES10-13505-G-B 90-264Vac PT2 +13.5Vdc 0.5A -12.0Vdc 0.3A Mouse PT HES10-15004-H-C 90-264Vac PT3 +15.0Vdc 0.4A -15.0Vdc 0.2A Mouse PT HES10-18004-I-E 90-264Vac PT5 +18.0Vdc 0.4A -18.0Vdc 0.2A Mouse PT HES10-20004-J-G 90-264Vac PT7 +20.0Vdc 0.4A -24.0Vdc 0.1A Mouse PT FORMAT HES10B SERIES MODEL NO. DESCRIPTION: HES10B – X X X YYY – 0 – S [1] ONLY FOR WM1 AC PLUG [0] FOR SINGLE OUTPUT ONLY OUTPUT CURRENT OUTPUT VOLTAGE SERIES NAME (HiTRON External Switcher) : About 10W OUTPUT VOLTAGE/CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) 3.0Vdc ≤ Any voltage < 9.0Vdc 9.0Vdc ≤ Any voltage ≤ 30.0Vdc OUTPUT VOLTAGE (Vdc) / CURRENT (A) 3.0-5.0V/2.0A, 5.1-5.3V/1.9A, 5.4-5.6V/1.8A, 5.7-5.9V/1.7A, 6.0-6.3V/1.6A, 6.4V-6.7V/1.5A, 6.8-7.2V/1.4A, 7.3-7.7V/1.3A, 7.8-8.4V/1.2A, 8.5-8.9V/1.1A. 9.0-12.0V/1.0A, 12.1-13.3V/0.9A, 13.4-15.0V/0.8A, 15.1-17.1V /0.7A, 17.2-20.0V/0.6A, 20.1-24.0V/0.5A, 24.1-30.0V/0.4A. Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No. SINGLE OUTPUT (Model No. for examples) MODEL NO. AC INPUT AC PLUG O/P VOLTAGE O/P CURRENT FORMAT HES10B-03320-0-1 90-132Vac WM1 3.3Vdc 2.0A Wallmount HES10B-05020-0-1 90-132Vac WM1 5.0Vdc 2.0A Wallmount HES10B-06316-0-1 90-132Vac WM1 6.3Vdc 1.6A Wallmount HES10B-07014-0-1 90-132Vac WM1 7.0Vdc 1.4A Wallmount HES10B-09510-0-1 90-132Vac WM1 9.5Vdc 1.0A Wallmount HES10B-12010-0-1 90-132Vac WM1 12.0Vdc 1.0A Wallmount HES10B-15008-0-1 90-132Vac WM1 15.0Vdc 0.8A Wallmount HES10B-18006-0-1 90-132Vac WM1 18.0Vdc 0.6A Wallmount HES10B-24005-0-1 90-132Vac WM1 24.0Vdc 0.5A Wallmount HES10B-30004-0-1 90-132Vac WM1 30.0Vdc 0.4A Wallmount -9- MECHANICAL DIMENSIONS: MM [INCHES] -10- HES10/WM: 168.0g (5.93Oz.) HES10/DT: 232.0g (8.18Oz.) HES10/PT: 210.0g (7.41Oz.)