DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: Right Angle DomiLEDTM AlInGaP : DSx-NSS TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > > > > > > > > High brightness surface mount LED. Designed for sideway illumination. 120° viewing angle. Small package outline. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard; AEC-Q101. Passed Corrosion Resistant Test. Appx. 4.1 Applications: > > > Automotive: Interior applications, eg: switches, telematics, climate control system, dash board, etc. Consumer Appliances: Backlighting illumination as in PDAs, LCD TV. Lighting: channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ IF = 20mA IV (mcd) Appx. 1.1 Min. Typ. Max. Viewing Angle˚ DSS-NSS-T2U-1 Super red, 632nm 120 355.0 420.0 715.0 DSR-NSS-T2U-1 Red, 625nm 120 355.0 420.0 715.0 DSA-NSS-UV1-1 Amber, 615nm 120 450.0 600.0 900.0 DSO-NSS-UV1-1 Orange, 605nm 120 450.0 600.0 900.0 DSY-NSS-UV1-1 Yellow, 587nm 120 450.0 600.0 900.0 Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Appx. 3.1 Part Number DSx-NSS Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) Min. (V) 1.8 2.1 2.6 12 Absolute Maximum Ratings Maximum Value Unit DC forward current 30 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 200 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 80 mW 630 K/W 350 K/W 480 K/W 270 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Real Thermal Resistance Junction / ambient, Rth JA real Junction / solder point, Rth JS real - Electrical Thermal Resistance Junction / ambient, Rth JA el Junction / solder point, Rth JS el (Mounting on FR4 PCB, pad size >= 5 mm2 per pad) 2 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) Appx. 2.2 DSS; Super red Full 625 - 640 DSR; Red Full 620 - 630 DSA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DSO; Orange DSY; Yellow 3 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity Appx. 1.1 IV (mcd) Brightness Group T2 355.0...450.0 U1 450.0...560.0 U2 560.0...715.0 V1 715.0...900.0 Vf Bining (Optional) Forward Voltage (V) Appx. 3.1 Vf @ If = 20mA V1 1.80 ... 1.95 V2 1.95 ... 2.10 V3 2.10 ... 2.25 V4 2.25 ... 2.40 V5 2.40 ... 2.55 V6 2.55 ... 2.70 Please consult sales and marketing to incorporate special part number to incorporate Vf binning. 4 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Relative Luminous Intensity Vs Forward Current Relative Luminous Intensity Vs Forward Current Relative Luminous Intensity Vs Forward Current IV/IV(20mA) f(IF);F); = 25°C = f(I Tj =Tj 25°C IV/IV(20mA)= 1.0 0.6 0.2 0.8 0.4 0.0 0 40 30 20 35 25 15 30 20 10 25 15 5 20 10 1510 2015 2520 3025 Forward Current IFI (mA) Forward Current (mA) Forward F Current IF (mA) F Maximum Current Vs Temperature Maximum Current Vs Temperature Maximum Current Vs Temperature I =f(T) F IF = f (T) 35 0 35 25 10 5 Maximum Current Vs10Temperature Current Vs Temperature 5 0 10 5 Maximum 20 15 2520 3025 IF = f15 (T) IF = f (T) Forward Current IF (mA) 40 Forward Current I (mA) 5 40 Forward Current (mA) IF (mA) ForwardIFCurrent Forward Current IF (mA) Forward Current IF (mA) Forward Current IF (mA) Forward Current IF (mA) Allowable Forward Current IF( mA ) Allowable Forward Current IF( Current mA ) IF( mA ) Allowable Forward 0.2 0.4 0.0 0.4 0.0 0.2 40 Allowable Forward Current IF( mA ) 0.4 0.6 0.0 5 0 0.2 0 0.6 0.2 40 30 0.6 0.8 10 IF = f15 (T) 20 25 Forward Current IF (mA) 30 35 Maximum Current Vs Temperature IF = f (T) 25 Ta 30 20 25 Ta 15 20 10 15 Ta = Ambient 5 Temperature Ta = Ambient Temperature Ts = Solder 10 Point Ts =Temperature Solder Point Temperature Ts Ts Ts 30 Ta Ta Ta 0 0 10 4020 5030 6040 7050 8060 9070 100 80 110 90 155 0 T 10 5200 Temperature T30 a = Ambient Temperature = Ambient a Ts Temperature = Solder Point Temperature Temperature T(°C) Temperature T(°C) Ts = Solder Point 100 0 Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs 20 5030 60 70Duty 80Ratio 90 0 10 200 3010( T40 6040 7050 ) 80 90 100 110 j = 25°C; tp (≤T10μs j = 25°C; tp ≤ 10μs ) Temperature T(°C) 5 Ta = Ambient Temperature T(°C) 1000 Temperature T(°C) 1000 Temperature Ts = Solder Point Temperature Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs Duty Ratio 0 (≤T10μs tp ≤ 10μs ) j = 25°C; ( T = 25°C; t ) j p 0 10 20 30 40 50 60 70 80 90 100 110 1000 1000 Allowable Forward Current Temperature T(°C) Vs Duty Ratio 1000 100 100 100 10 10 10 0.1 0.1 25 10 15 20 5 10 15 20 Forward Current Vs Forward Voltage 25 IF = f(VF); Tj = 25°C 15 20 10 15 105 0 5 301.8 10 50 0 30 5 1.8 1.0 0 Emission Spectral 1.81.9 Relative Spectral 1.9 Relative 2.02.1 Emission2.12.2 IF =Tj20mA Irel = f(λ); Tj =2.0 = 25°C; IF = 20mA I25°C; rel = f(λ); Forward Voltage VF (V) 1.0 Forward Voltage V (V) 0.9 0 1.8 0.8 1.0 1.0 0.8 0.7 0.9 Ts 1.81.9 0.9 0.6 0.8 1.0 0.5 0.7 0.9 0.4 0.6 0.8 0.3 0.5 0.7 0.2 0.4 0.6 0.1 0.3 0.5 0.0 0.2 100 0.4 110350 0.1 0.3 0.9 0.7 0.8 0.6 0.7 0.5 0.6 0.4 0.5 0.3 0.4 0.2 1.92.0 2.02.1 2.12.2 Forward Voltage VF (V) 2.2 F Relative Spectral Emission Relative Spectral Emission IrelSpectral = If(λ); T = 25°C; IF = 20mA Relative Emission j = 25°C; I = 20mA = f(λ); T 25°C; IF = 20mA Irel = f(λ); Tj =2.0 1.9Amber 2.1 rel Amber j F 2.2 Forward Voltage VF (V) Super Red Super Red Orange OrangeEmission Relative Spectral Red Amber Red Amber Irel = f(λ); Tj = 25°C; IF = 20mA Super Red Super Red Yellow Yellow Orange Orange Red Red Amber Yellow Yellow Super Red Orange Red 0.1 0.2 0.0 400 450 350 500 400 550 450 600 500 650 550 700 600 750 650 800 700 850 750 0.1 Wavelength λ (nm) Wavelength λ (nm) 0.0 350 500 400 550 450 600 500 650 550 700 600 750 650 800 700 850 750 400 450 (nm) Wavelength λWavelength (nm) Wavelength λ λ(nm) 0.0 350 400 0.0 100 0.2 110 350 2.2 Forward Voltage VF (V) Forward Voltage VF (V) 0.3 Yellow 0.1 450 500 550 600 650 700 Wavelength λ (nm) Radiation ( T = 25°C; t ≤ 10μs) p Allowablej Forward Current Vs Duty Ratio ( Tj = 25°C; tp ≤ 10μs ) 30° 20° 10° 750 800 800 850 800 850 850 Pattern 0° 1.0 100 40° 100 10 10 0.1 Ts 15 20 Forward Current I (mA) 1.2 0.8 0.4 30 F Forward Current (mA) IF (mA) ForwardIFCurrent 1.4 1.0 0.6 0.8 1.0 20 25 Forward CurrentVoltage Vs Forward Voltage Forward Current Vs Forward = f(VF); Tj = 25°C IF = f(VF); Tj =IF25°C 25 30 rel 1.6 1.2 0.8 1.2 1.4 Luminous Intensity Vs Forward Current Relative IV/IV(20mA) = f(IF); Tj = 25°C 1.0 1.2 Relative Luminous Irel Luminous RelativeIntensity Luminous Intensity IrelIntensity Irel Relative 1.4 1.0 25 30 30 Relative Luminous Intensity Irel Relative Luminous Intensity IrelI Intensity Luminous Relative Relative Luminous Intensity Intensity Irel Relative Luminous Irel 1.6 1.2 30 Relative Luminous IntensityCurrent Vs Forward Current Relative Luminous Intensity Vs Forward (20mA) = f(IF); Tj = 25°C 1.4 V/IV); IV/IV(20mA) =If(I F Tj = 25°C 1.6 Forward Current IF (mA) Forward Current IF (mA) Forward Current IF (mA) 1.4 0.0 35 IV/IV(20mA) = f(IF); Tj = 25°C 1.6 AllowableAllowable Forward Current ( mA ) IF( mA ) ForwardIFCurrent Relative Luminous Irel Luminous RelativeIntensity Luminous Intensity IrelIntensity Irel Relative Relative Luminous Intensity Irel 1.6 Forward Current Vs Forward Voltage Forward Current Vs Forward Forward Current Voltage Voltage f(V ); Vs T Forward = 25°C IF = f(VFI);F T= F F); Tjj = 25°C j =IF25°C = f(V 0.1 1 1 10 10 100 100 10 100 100 0.8 50° 0.6 60° 0.4 Duty Ratio, % Duty Ratio, % 0.1 1 1 10 Duty Ratio, %Duty Ratio, % 1 10 70° 0.2 80° 90° 100 0 Duty Ratio, % Duty Ratio, % 5 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Relative Forward Voltage Vs Junction Temperature Relative Vs Junction Voltage Junction Temperature ∆VRelative =Forward VF Forward - VVoltage (25°C) =Vsf(T );Temperature IF =20mA F F j Relative Luminous Intensity Vs Junction Temperature Relative Luminous Intensity Vs Junction Temperature IV/IVLuminous (25°C) = f(T );VsIFJunction = 20mA Relative Intensity Temperature j = f(Tj);= If(T IV /IV (25°C) V =);20mA IV /IV (25°C) j IV = 20mA 0.4 0.4 1.8 1.8 Amber Amber 0.2 0.2 Orange Orange 0.1 0.1 Yellow Yellow 0.0 0.0 -0.1 -0.1 -0.2 -0.2 Red Red -0.3 -0.3 SuperSuper Red Red -0.4 -0.4 1.2 1.2 0.8 0.8 0.4 0.4 Junction Temperature Tj(°C) Chromaticity Coordinate Shift Vs Junction Temperature ∆Cx, ∆Cy = f(Tj); IF = 20mA ∆λdom = λdom - λdom (25°C) = f(Tj); IF = 20mA 0.025 0.020 0.015 4.0 0.010 2.0 0.005 ∆Cx, ∆Cy dom Wavelength ∆λdom(nm) Relative Relative Wavelength ∆λ (nm) 0.030 Amber Orange 6.0 0.0 Red -2.0 Super Red -4.0 0.000 -0.015 -0.020 -10.0 -0.025 -30 -10 10 30 50 70 90 110 -0.030 130 ∆Cy -0.010 -8.0 -50 ∆Cx -0.005 -6.0 -12.0 SuperSuper Red Red 0.6 0.6 Relative Wavelength Vs Junction Temperature Relative Wavelength Vs Junction ∆λdom = λdom - λdom (25°C)Temperature = f(Tj); IF =20mA Yellow Red Red 1.0 1.0 j j 8.0 Amber Amber 1.4 1.4 0.0 0.0 -50 -50 -30 -30 -10 -10 10 1030 3050 5070 7090 90 110 110 130 130 Junction Temperature T j(°C)T (°C) Junction Temperature Junction Temperature Tj(°C) 10.0 Yellow Yellow 1.6 1.6 0.2 0.2 -0.5 -0.5 -50 -50 -30 -30 -10 -10 10 1030 3050 5070 7090 90 110 110 130 130 Junction Temperature T j(°C)T (°C) Junction Temperature 12.0 Orange Orange rel Relative Luminous Intensity Irel 0.3 0.3 Luminous Intensity Irel Relative Relative Luminous Intensity I 2.0 2.0 Relative Forward Voltage ∆VF (V) Relative Forward Voltage ∆VF (V) Relative Forward Voltage ∆VF (V) ∆VF =∆V VF -=VVF(25°C) = f(Tj); IF = 20mA F F - VF(25°C) = f(Tj); IF = 20mA 0.5 0.5 -50 -30 -10 10 30 50 70 90 110 130 Junction Temperature T j(°C) JunctionTemperature Temperature T j(°C) Junction Tj(°C) 6 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination DomiLED • AllnGaP : DSx-NSS Package Outlines TM Note : Primary thermal path is through Anode lead of LED package Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 7 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Recommended Solder Pad 8 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2500 units. • Reel diameter is 180 mm. 9 09/11/2016 V11.0 DOMINANT DOMINANT Opto Technologies TM AllnGaP : DDx-xRS AllnGaP : DSx-NSS TM Opto Technologies Innovating Illumination Innovating Illumination Packaging Specification Packaging Specification 10 10 28/10/2010 V8.0 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Right Angle DomiLED 1 completed bag (2500pcs) 0.010 0.034 240 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Right Angle DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 7 reels MAX Small 325 x 225 x 280 0.54 11 reels MAX Medium 570 x 440 x 230 1.46 48 reels MAX Large 570 x 440 x 460 1.92 96 reels MAX 11 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Appendix 1) Brightness: 1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 2) Color: 2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3). 2.2 DOMINANT wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3). 3) Voltage: 3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3). 4) Corrosion Robustness: 4.1 Test conditions: 40 °C / 90 % rh / 15 ppm H2S / 336 h. = Stricter than IEC 60068-2-43 (H2S) [25 °C / 75% rh / 10 ppm H2S / 21 days]. 13 09/11/2016 V11.0 DOMINANT TM AllnGaP : DSx-NSS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification 9 Error in carrier tape 21 Jun 2012 2 Add new partno: DSO-NSS-UV1-1 Add Thermal Resistance and Characteristic 10 Sep 2013 1, 6, 10 Update Application Add Note in Package Outline Update Packaging Specification 26 Aug 2015 1, 8 Add Features Update Carrier Tape 10 Mar 2016 1, 5, 6, 7, 13 Update Features Update Graph Update Package Outline Add Appendix 03 Oct 2016 2 Add Electrical Thermal Resistance 09 Nov 2016 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 03/10/2016 V10.0 DOMINANT TM Opto Technologies AllnGaP : DSx-NSS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic company that is amongst the world’s leading automotive LED manufacturers. With an extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected]