CLARE CPC1335 Single pole optomosâ® relay with bi-directional transient protection Datasheet

CPC1335
Single Pole OptoMOS® Relay with
Bi-directional Transient Protection
Parameters
Blocking Voltage
Load Current
Max On-resistance
LED Current to Operate
Ratings
350
Units
VP
100
35
1
mA
Ω
mA
Transient Protection Characteristics
Peak Pulse Power
600W
VWM
40.2V
Description
The CPC1335 is a single-pole normally open
(1-Form-A) solid state relay with bi-directional
transient voltage suppressor (TVS) relay protection,
which is designed to meet the requirements of
EN50130-4 (installation class 3).
The relay output is constructed with efficient
MOSFET switches and photovoltaic die that use
Clare's patented OptoMOS architecture. The input,
a highly efficient GaAlAS infrared LED, controls the
optically coupled output.
Features
• 100% Solid State
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750Vrms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
The CPC1335 is available in an 8-pin, space-saving
surface-mount package.
Approvals
• UL Recognized Component: File #E76270
• EN/IEC 60950 Compliant
• CSA Certified Component: Certificate # 1172007
Ordering Information
Applications
•
•
•
•
•
•
•
•
•
Security
Sensor Circuitry
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Aerospace
Industrial Controls
Part #
CPC1335P
CPC1335PTR
Description
8-Pin Flatpack (50/Tube)
8-Pin Flatpack (1000/Reel)
Pin Configuration
+ Control
– Control
1
8
2
7
3
6
4
5
TVS +/TVS -/+
Load
Load
Switching Characteristics of
Normally Open (Form A) Devices
Control
ILOAD
+
90%
10%+
tOFF
tON
Pb
RoHS
2002/95/EC
DS-CPC1335-R05
e3
www.clare.com
1
CPC1335
Absolute Maximum Ratings
Parameter
SSR Output Blocking Voltage
TVS Working Voltage, Maximum (VWM)
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
SSR Output Power Dissipation 2
TVS Peak Pulse Power (PPP)
(IPP=9.3A, 10/1000μs pulse)
Isolation Voltage Input to Output
Operating Temperature
Storage Temperature
1
Derate Linearly 1.33 mw / ºC
2
Derate Linearly 6.67 mw / ºC
Ratings
350
40.2
5
50
1
150
400
600
Units
VP
V
V
mA
A
mW
mW
W
3750
-40 to +85
-40 to +125
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical absolute maximum ratings are at 25°C
Electrical Characteristics
Parameters
Output Characteristics @ 25°C
Load Current
Continuous 1
Peak
On-resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current 3
Input Voltage Drop
Reverse Input Current
Common Characteristics @ 25°C
Input to Output Capacitance
1
Conditions
Symbol
Min
Typ
Max
IF=2mA
t=10ms
IL=100mA
VL=350V
IL
ILPK
RON
ILEAK
-
25
-
100
350
35
1
50V; f=1MHz
TON
TOFF
COUT
-
40
10
10
-
IL=100mA
IF=5mA
VR=5V
IF
VF
IR
0.9
-
1.2
-
1
1.4
10
mA
V
μA
-
CI/O
-
3
-
pF
IF=2mA, VL=10V
2
Load current derates linearly from 100 mA @ 25ºC to 70ma @ 85ºC
Measurement taken within 1 second of on time
3
For applications requiring high temp operation (greater than 60ºC) a minimum LED drive current of 3mA is recommended.
Units
mA
Ω
μA
ms
pF
Electrical Characteristics: TVS
Parameters
Output Characteristics @ 25°C
Clamping Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
2
Conditions
Symbol
Min
Typ
Max
Units
IPP=9.3A
I=1mA
VWM=40.2V
VC
VBR
IL
44.4
-
-
66.5
5
V
V
μA
www.clare.com
R05
CPC1335
PERFORMANCE DATA*
CPC1335
Typical LED Forward Voltage Drop
(N=50, TA=25ºC, IF=5mA)
35
CPC1335
Typical IF for Switch Operation
(N=50, TA=25ºC, IL=100mA)
25
25
25
20
15
10
5
0
1.17
10
5
10
5
0.36
20
15
10
27
28
29
30
On-Resistance (Ω)
31
IF=50mA
1.2
IF=10mA
IF=5mA
1.0
CPC1335
Typical Turn-On Time vs. Temperature
(VL=10V)
-40
0
20
40
60
80
Temperature (ºC)
100
2.0
1.5
IF=2mA
1.0
IF=5mA
-20
0
20
40
60
Temperature (ºC)
80
476
3000
Turn-Off Time (μs)
2000
1500
1000
500
472
470
468
466
464
0
462
0
10
20
30
40
LED Forward Current (mA)
50
399 410 421 432
Blocking Voltage (VP)
0.8
443
IF=1mA
0.7
0.6
IF=2mA
0.5
IF=5mA
0.4
0.28
474
2500
388
CPC1335
Typical Turn-Off Time vs. Temperature
(VL=10V)
0.2
-40
100
CPC1335
Typical Turn-Off vs. LED Forward Current
(TA=25ºC)
CPC1335
Turn-On Time vs. LED Forward Current
(TA=25ºC)
10
0.3
0.0
-40
120
15
1.0
LED Current (mA)
3500
-20
20
0.9
IF=1mA
0.5
0.8
CPC1335
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
377
Turn-Off Time (ms)
Turn-On Time (μs)
1.4
1.10
25
32
2.5
1.6
1.00
0
26
3.0
0.70 0.80 0.90
Turn-On (ms)
5
0.38
1.8
0.60
30
25
CPC1335
Typical LED Forward Voltage Drop
vs. Temperature
5
35
0
0.30 0.32 0.34
Turn-Off (ms)
10
0.50
5
0.28
15
0.60
Device Count (N)
15
0.26
LED Forward Voltage Drop (V)
0.40 0.45 0.50 0.55
LED Current (mA)
30
0
Turn-On Time (μs)
0.35
CPC1335
Typical On-Resistance Distribution
(N=50, TA=25ºC, IL=120mA)
35
20
20
0
0.30
Device Count (N)
Device Count (N)
15
0
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
CPC1335
Typical Turn-Off Time
(N=50, TA=25ºC, IL=100mA, IF=5mA)
25
20
Device Count (N)
Device Count (N)
Device Count (N)
30
CPC1335
Typical Turn-On Time
(N=50, TA=25ºC, IL=100mA, IF=5mA)
0
10
20
30
40
LED Forward Current (mA)
50
-20
0
20
40
60
Temperature (ºC)
80
100
CPC1335
Typical LED Current to Operate
vs. Temperature
(IL=70mA)
0.24
0.20
0.16
0.12
0.08
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R05
www.clare.com
3
CPC1335
PERFORMANCE DATA*
40
30
20
10
0
420
415
410
405
140
120
100
80
0
20
40
60
Temperature (ºC)
80
100
20
0
-40
-20
0
20
40
60
80
-40
100
150
0.010
0.008
0.006
0.004
CPC1335
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=5mA)
50
0
-50
-3
100
CPC1335
TVS Diode Breakdown Voltage
vs. Temperature
(Pins 7 & 8)
25
52
Leakage Current (nA)
51
50
49
48
47
46
45
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-2
-1
0
1
Load Voltage (V)
2
3
CPC1335
TVS Diode Leakage vs. Temperature
(Pins 7 & 8)
(VL=40V)
80
100
120
1s
10s 100s
CPC1335
TVS Derating Curve
120
100
20
15
10
5
0
-40
60
Time
Peak Pulse Power (% PPP @ 25ºC)
80
40
CPC1335
Energy Rating Curve
-150
20
40
60
Temperature (ºC)
20
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
-100
0.002
0
0
Temperature (ºC)
100
Load Current (mA)
0.012
-20
-20
Temperature (ºC)
0.014
0
-40
I F = 2mA
40
Load Current (A)
-20
I F = 5mA
60
400
CPC1335
Typical Leakage vs. Temperature
Measured Across Pins 5 & 6
(VL=350V)
0.016
Leakage (μA)
160
425
395
-40
TVS Breakdown Voltage (V)
180
430
Blocking Voltage (VP)
50
CPC1335
Typical Load Current vs. Temperature
Load Current (mA)
60
On-Resistance (Ω)
CPC1335
Typical Blocking Voltage
vs. Temperature
CPC1335
Typical On-Resistance vs. Temperature
(IL=50mA, IF=3mA)
-20
0
20
40
60
Temperature (ºC)
80
100
80
60
40
20
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
PPP - Peak Pulse Current (% IPP)
CPC1335
TVS Pulse Waveform 10/1000 (μs)
110
100
90
80
70
60
50
40
30
20
10
0
1
10
100
104
1000
Time (μs)
105
106
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.clare.com
R05
CPC1335
Manufacturing Information
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
Pb
e3
RoHS
2002/95/EC
MECHANICAL DIMENSIONS
8 Pin Flatpack Package
2.159 TYP.
(0.085 TYP.)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.398 ± 0.127
(0.370 ± 0.005)
Recommended PCB Land Pattern
2.286 MAX.
(0.090 MAX.)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.203
(0.008)
8.077 ± 0.127
(0.318 ± 0.005)
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
9.652 ± 0.381
(0.380 ± 0.015)
2.159 TYP.
(0.085 TYP.)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
Tape and Reel Packaging for 8 Pin Flatpack Package
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
1
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
8
Bo = 10.30
(0.406)
Top Cover
Tape
K0 = 2.70
(0.106)
K1 = 2.00
(0.079)
Embossed Carrier
Embossment
P = 12.00
(0.472)
Ao = 10.30
(0.406)
User Direction of Feed
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
5
Specification: DS-CPC1335-R05
©Copyright 2009, Clare, Inc.
All rights reserved. Printed in USA.
3/9/09
Similar pages