Click on Series name for product info on aimtec.com Series AM2S-Z 2 Watt | DC-DC Converter FEATURES: • • • • RoHSCompliant 4 Pin SIP Package Ultra MiniaturePackage High Efficiency up to 84% • • • Operating Temperature -40oC to +85oC Input / Output Isolation 1000 and 3000VDC Pin Compatible With Multiple Manufacturers Models Single Output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitive Load, Max (μF) AM2S-0503SZ AM2S-0505SZ AM2S-0507SZ AM2S-0509SZ AM2S-0512SZ AM2S-0515SZ AM2S-0518SZ AM2S-0524SZ AM2S-1203SZ AM2S-1205SZ AM2S-1207SZ AM2S-1209SZ AM2S-1212SZ AM2S-1215SZ AM2S-1218SZ AM2S-1224SZ AM2S-2403SZ AM2S-2405SZ AM2S-2407SZ AM2S-2409SZ AM2S-2412SZ AM2S-2415SZ AM2S-2418SZ AM2S-2424SZ AM2S-4803SZ AM2S-4805SZ AM2S-4807SZ AM2S-4809SZ AM2S-4812SZ AM2S-4815SZ AM2S-4818SZ AM2S-4824SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 AM2S-0503SH30Z AM2S-0505SH30Z AM2S-0507SH30Z AM2S-0509SH30Z AM2S-0512SH30Z AM2S-0515SH30Z AM2S-0518SH30Z AM2S-0524SH30Z AM2S-1203SH30Z AM2S-1205SH30Z AM2S-1207SH30Z AM2S-1209SH30Z AM2S-1212SH30Z www.aimtec.com 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 Model F 051e R11.H 400 220 400 220 270 220 220 220 160 220 130 220 110 220 80 220 400 220 400 220 270 220 220 220 160 220 Tel: +1 514 620 2722 1 of 5 Input Current Full | No Load (mA) Isolation (VDC) Efficiency (%) 71 77 77 80 82 82 82 82 72 78 80 82 84 84 84 82 73 78 80 82 84 84 84 82 74 80 80 84 84 84 84 84 487 487 152 213 208 203 198 198 198 203 120 170 166 162 158 158 158 162 74 104 104 99 99 99 99 99 38 53 52 51 52 51 35 35 35 35 35 35 35 35 20 20 20 20 20 20 20 25 18 18 18 18 18 18 18 18 10 10 10 10 10 10 10 10 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 487 487 152 213 208 203 198 198 198 203 120 170 166 35 35 35 35 35 35 35 35 20 20 20 20 20 3000 71 3000 77 3000 77 3000 80 3000 82 3000 82 3000 82 3000 82 3000 72 3000 78 3000 80 3000 82 3000 84 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter Models Single Output (continued) Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitive Load, Max (μF) AM2S-1215SH30Z AM2S-1218SH30Z AM2S-1224SH30Z AM2S-2403SH30Z AM2S-2405SH30Z AM2S-2407SH30Z AM2S-2409SH30Z AM2S-2412SH30Z AM2S-2415SH30Z AM2S-2418SH30Z AM2S-2424SH30Z AM2S-4803SH30Z AM2S-4805SH30Z AM2S-4807SH30Z AM2S-4809SH30Z AM2S-4812SH30Z AM2S-4815SH30Z AM2S-4818SH30Z AM2S-4824SH30Z 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 130 110 80 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 Input Specifications Parameters Voltage range Filter Turn on Transient Process Time Start-up time Absolute Maximum Rating Peak Input Voltage time Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Nominal 5 12 24 48 Parameters Voltage Accuracy Short Circuit Protection Over Current Protection Line Voltage Regulation (Single) Load Voltage Regulation (Single) Load Voltage Regulation (Single) 3.3V Output Model Temperature Coefficient Ripple & Noise Rising Time www.aimtec.com F 051e R11.H 4.5-5.5 10.8-13.2 21.6-25.4 43.2-52.8 At 20MHz Bandwidth Tel: +1 514 620 2722 2 of 5 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 84 84 82 73 78 80 82 84 84 84 82 74 80 80 84 84 84 84 84 Capacitor Units -0.7 - 7 -0.7 - 15 -0.7 - 28 -0.7 - 54 VDC 25 ms ms VDC ms Rated Units 1000 or 3000 > 1000 60 For 1.0% of Vin 20…100% load 20…100% load Efficiency (%) Maximum Typical Conditions Isolation (VDC) 20 20 25 18 18 18 18 18 18 18 18 10 10 10 10 10 10 10 10 200 0-7 0-15 0-28 0-54 100 Conditions Output Specifications 162 158 158 158 162 74 104 104 99 99 99 99 99 38 53 52 51 52 51 Typical 5 Vin 12 Vin 24 Vin 48 Vin 60 sec Input Current Full | No Load (mA) Typical VDC MOhm pF Maximum ±3 Momentary (1sec) 110% Iout max ±1.2 ±10 ±20 ±0.02 150 100 Units % % % % %/oC mV p-p ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching Frequency 100% load 70 KHz o Operating Temperature -40 to +85 C o Storage Temperature -40 to +125 C o Max Case Temperature 100 C Cooling Free air convection Humidity 95 % Case material Plastic UL94-VO Weight 1.8 g Dimensions(L x W x H) 0.46 x 0.29 x 0.38 inches 11.68 x 7.50 x 9.65 mm MTBF >1121 000hrs(MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval CE (for 1000VDC Isolated models) EN55022 (Radiated Emissions) class B EN55024 (Noise Immunity) IEC61000-4-2(ESD) IEC61000-4-3(Radiated immunity) Standards Pin Out Specifications Pin Dimensions 11.68 (0.46) 1000 and 3000VDC 1 2 3 4 -V Input +V Input -V Output +V Output PRINTED FACE 10.15 (0.40) 9.65 (0.38) 0.50 (0.02) Derating 7.50 (0.29) 3.05 (0.12) Free Air Convection 2.54 (0.10) Output Power (%) 100 Safe Operating Area 60 0.30 (0.01) 7.50 (0.29) 40 20 0.50 (0.02) 0 - 40 0.50 (0.02) 2.00 (0.08) 80 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter Application Circuit, & Conducted Emissions L C1 +V output +V input C2 DC/DC Converter -V input Load -V output C3 Input Voltage (VDC) 5 12 15 24 48 C1 L C2 C3 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V 18uH 18uH 18uH 18uH 18uH N/A N/A N/A 2.2uF/100V 2.2uF/100V N/A N/A N/A 470pF/2KV 470pF/2KV Typical Efficiency Example Charts AM2S-2405SZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 20% 40% 60% 80% 100% Loading % Eff % AM2S-1205SZ Efficiency vs. Loading 100 80 60 40 20 0 20% 40% 60% 80% 100% Loading % www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter AM2S-2405SZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 20% 40% 60% 80% 100% Loading % AM2S-4824SZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 20% 40% 60% 80% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only