Half Pitch Low Profile Connectors DHF Series OUTLINE DHF series is a half pitch interface connector which is low profile EMI shielded for small and high density applications. FEATURE ・ Low profile, 3mm thinner than DHA series connector ・"D" shaped shell polarization to prevent from mis-mating. ・ High reliable, scoop-proof cantilever contact design ・ Plastic hood with inner shell for ESD protection ・One touch locking mechanism ・ Easy termination by assembly tools SPECIFICATIONS Rated Voltage 250V AC(r.m.s.) Rated Current 0.5A / Contact Dielectric Withstanding Voltage 500V AC(r.m.s.) at 1 minute Insulation Resistance 500M Ω min. at 500V DC Contact Resistance 35m Ω max. Applicable Cable AWG#28, ７/0.127 Stranded Cable φ 0.58mm RoHS MATERIAL / FINISH Compliant Compliant Item Material / Finish Contact Copper Alloy / Au Plating Front Shell Brass / Ni Plating Insulator LCP Resin or Polyamide Resin / Black Cover Polyamide Resin / Black Inner Shell Steel / Ni Plating Hood ABS Resin Lock Lever Stainless Steel ＋ ABS Resin Cable Clamp Steel / Sn-Ag Plating Locator PBT Resin or LCP Resin / Black Ground Tab Copper Alloy / Ni Plating Lock Screw and Nut Steel / Ni Plating ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 090703 http://www.ddknet.co.jp DHF Series Unit：mm ○ I/O Cable Plug Connector (Hood ) DHF-PDA10-3-A01-FA Mating Style P: Plug Connector FA: Lead Free 1: DDK Mark Connector Style DA: I/O Cable Type Hood Color 0: Black 1: Beige 2: Gray 3: Dark Grry Number of Contact 10, 20 Contact Plating 1 Contact Area: Au(0.76 μ m) over Ni Plating Tail Area: Sn-Ag Plating 2 Contact Area: Au(0.25 μ m) over Ni Plating Tail Area: Sn-Ag Plating 3 Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag Plating Hood Style A: Plastic Hood Straight (Long Hood) 33 1.27 n/2 +1 C A B E max. DHF JA D n 1 n/2 8 8.5 8.8 Number of Part Number Contact A B C D E (max.) DHF-PDA10- □ -A □ 1-FA 10 22.75 10.80 5.08 5.0 23.75 DHF-PDA20- □ -A □ 1-FA 20 29.10 17.15 11.43 5.8 30.10 Assembly Tools Assembly Tool Part Number Item 357J-12463- □□ DHF-HP □□ -D □□ Assembly Tool Set □ : Number of Contact (ex.) 10 contacts 357J-12463-10 Part Number DHF-PDA Cable Wiring and Cable Cutting Tool 357J-12224 DHF Termination Tool 357J-12198 DHF Cable Clamp Assembly Tool Set 357J-12773 DHF Cable Clamp Assembly Tool 357J-12199 DHF Cable Clamp Locator 357J-12228- □ ※ Please refer the instruction manual as attached with DHF assembly tool set. DHF Cable Calmp Assembly Tool Set DHF Cable Clamp Assembly Tool for DHF-PDA10,20 357J-12773 for DHF-PDA10 357J-12773-10 for DHF-PDA20 357J-12773-20 DHF Cable Clamp Locator 357J-12228-1，-2 357J-12199 357J-12228-1 357J-12228-2 ※ DHF cable calmp assembly tools are used depend on the number of contact. Please refer to the above table. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 DHF Series Unit：mm ○ Right Angle Receptacle DHF-RAA10-131NB-FA Mating Style R: Receptacle FA: Lead Free Panel Mounting Screw B: Lock Screw, Panel Thickness0.6 0.05 〜 0.8 0.05 Connector Style AA: Right Angle DIP Number of Contact 10, 20 Tail Cover N: Less Cover Applicable PCB Thickness 1: 0.8 0.1 〜 1.0 0.1 2: 1.6 0.19 Mounting Style 1: M2X0.4 Tapped Ground Tab 3: Board Lock(PCB Thickness1.6) Contact Plating 1 Contact Area: Au(0.76 μ m) over Ni Plating Tail Area: Sn-Ag Plating 2 Contact AREA: Au(0.25 μ m) over Ni Plating Tail Area: Sn-Ag Plating 3 Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag Plating 8.55 6.1 6.11 A B C 17.02 Φ4 17.02 Lock Screw Panel Locator Pin 4.65 Panel 2.8 2.1 4.65 6 4.2 Lock Screw 2.8 1.27 4.205 4.205 F DHF-RAA□□-1□□NB-FA DHF-RAA□□-2□□NB-FA A 0.05 (E) Pattern 5.715 0.08 No.1 Contact I 0.08 +0.1 Φ0.7 0 3.81 0.05 1.27 0.08 A 0.1 J 0.1 G 0.1 0 -2 F 0.05 Location Hole 0.8 0.1〜1.0 0.1 (PCB Thickness： 1) 1.6 0.19 (PCB Thickness： 2) +0.2 Φ2.4 0 5 0.1 PCB Edge （Interface Side） 4(max.) +0.1 Φ0.7 0 1.905 0.08 2(max.) 20 Φ2.2 0.05 Hole 4 0.1 R1.25 0.1 Panel Cut-out Dimensions (Panel Thickness：0.7 0.15) PCB Mounting Dimensions (View from Mounting Side) Part Number Number of Contact A B C E F G I J DHF-RAA10- □□□ NB-FA 10 17.08 10.50 22.75 5.08 12.70 11.60 8.89 12.67 DHF-RAA20- □□□ NB-FA 20 23.43 16.85 29.10 11.43 19.05 17.95 15.24 19.02 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 3.5 E