MHP650 Series • Medical Safety Approvals • End Fan, Top Fan & U’ ‘ Channel Mechanical Options • -20 ºC to +70 ºC Operation • 5 V Standby • AC OK, Remote On/Off and Active Current Share • Load Dependant Variable Fan Speed • Screw Terminals • 3 Year Warranty The MHP650 AC-DC power supply provides upto 650 W of output power in three mechanical packages to provide installation flexibility in a range of medical applications. The unit comprises of a main output with voltages from 12-48 VDC and two peripheral outputs providing a 12 VDC fan supply and a 5 VDC standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of AC input and remote on/off control. Multiple units can used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage current, and conducted EMC compliance to Class B also simplify higher power system design. Packaged in a compact 8” (203 mm) x 4” (102 mm) x 2.6” (65 mm) and carrying IEC60601 family safety approvals, the MHP650 has a load dependant variable speed fan, is fully protected with overtemperature shutdown and provides full power from -20 ºC to 50 ºC and 50% power at +70 ºC. xppower.com Models and Ratings End Fan Models (-EF) Output Voltage V1 12 V 15 V 24 V 28 V 36 V 48 V Max Output Current V1 50.0 A 40.0 A 27.0 A 23.0 A 18.0 A 13.5 A Fan Supply V2 Not Not Not Not Not Not Standby Supply V3 Available Available Available Available Available Available 5V 5V 5V 5V 5V 5V / / / / / / 0.2 0.2 0.2 0.2 0.2 0.2 Max Output Power Model Number 607 W 607 W 657 W 651 W 657 W 657 W MHP650PS12-EF MHP650PS15-EF MHP650PS24-EF MHP650PS28-EF MHP650PS36-EF MHP650PS48-EF Max Output Power Model Number 607 W 607 W 657 W 651 W 657 W 657 W MHP650PS12-TF MHP650PS15-TF MHP650PS24-TF MHP650PS28-TF MHP650PS36-TF MHP650PS48-TF A A A A A A Top Fan Models (-TF) Output Voltage V1 12 V 15 V 24 V 28 V 36 V 48 V Max Output Current V1 50.0 A 40.0 A 27.0 A 23.0 A 18.0 A 13.5 A Fan Supply V2 Not Not Not Not Not Not Standby Supply V3 Available Available Available Available Available Available 5V 5V 5V 5V 5V 5V / / / / / / 0.2 0.2 0.2 0.2 0.2 0.2 A A A A A A U Channel Models Output Voltage V1 12 V 15 V 24 V 28 V 36 V 48 V Max Output Current V1 50.0 A 40.0 A 27.0 A 23.0 A 18.0 A 13.5 A Fan Supply V2 12 V 12 V 12 V 12 V 12 V 12 V / / / / / / 0.5 0.5 0.5 0.5 0.5 0.5 Standby Supply V3 A A A A A A 5V 5V 5V 5V 5V 5V / / / / / / 0.2 0.2 0.2 0.2 0.2 0.2 Max Output Power(1) A A A A A A 601 W 601 W 651 W 655 W 651 W 651 W Model Number MHP650PS12 MHP650PS15 MHP650PS24 MHP650PS28 MHP650PS36 MHP650PS48 1. U Channel models require a minimum of 5.5 ms airflow from the system for cooling Input Characteristics Characteristic Input Voltage - Operating Input Frequency Power Factor Input Current - No Load Input Current - Full Load Inrush Current Earth Leakage Current Input Protection Minimum 85 47 Typical 115/230 50/60 >0.9 0.15/0.3 6.5/3.2 Maximum 264 63 40 90/175 250 T16 A / 250 V internal fuse in both line and neutral Units VAC Hz A A A μA Notes & Conditions Derate output power < 90 VAC. See fig. 1. EN61000-3-2 class A compliant 115/230 VAC 115/230 VAC 230 VAC cold start, 25 °C 115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.) Input Derating Curve Figure 1 100 Output Power (%) 90 80 70 60 50 40 85 90 264 Input Voltage (VAC) 2 xppower.com Output Characteristics Characteristic Output Voltage - V1 Initial Set Accuracy Output Voltage Adjustment Minimum Load Start Up Delay Hold Up Time Drift Line Regulation Load Regulation Minimum 12 Typical ±0.2 ±0.5 ±1 (V1) , ±5 (V3) Units VDC % % A s ms % % % 4 % 1 140 145 % pk-pk % % I nom 0.02 %/˚C °C 0 0.5 20 Transient Response - V1 Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient Overtemperature Protection Maximum 48 ±1 (V1) , ±5 (V3) ±10 115 110 Notes & Conditions See Models and Ratings table 50% load, 115/230 VAC V1 only. See mechanical details. 230 VAC full load After 20 min warm up 90-264 VAC 0-100% load. Recovery within 1% in less than 500 μs for a 50-75% and 75-50% load step V1: 20 MHz bandwidth Vnom DC. Output 1 only, recycle input to reset Output 1 only, auto reset. See fig 2. Auto Recovery, hiccup mode Protects unit from overtemperature. Auto reset. Output Overload Characteristic Unit enters hiccup mode Figure 2 Typical V1 Overload Characteristic (MHP650PS12 shown) 3 xppower.com General Specifications Xxxxxxxxxx Characteristic Efficiency Isolation: Input to Output Input to Ground Output to Ground Switching Frequency Power Density Minimum Typical 84 Maximum 4000 1500 500 70/200 8.2 Mean Time Between Failure 260 Weight Units % VAC VAC VDC kHz W/in3 kHrs 2.8 (1.25) lb (kg) Notes & Conditions See fig 3 & 4 PFC converter / Main converter MIL-HDBK-217F at 25 °C GB See mechanical details Efficiency vs Load MHP650PS12 Figure 3 MHP650PS48 Figure 4 Signals & Control Characteristic Notes & Conditions Signals & Control Remote Sense AC OK / Power Fail Remote On/Off (Inhibit/Enable) 4 Compensates for 0.5 V total voltage drop Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8) AC OK: Provides ≥ 5 ms warning of loss of output from AC failure Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9) Current Share When more than one unit (with the same output voltage) is used in parallel to increase output current, the current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground reference. Units share current within 10% of each other at full load. See fig 7. Standby Supply V3 Isolated 5 V/0.2 A supply, always present when AC supplied. xppower.com Signals & Control AC OK/Power Fail Figure 5 POWER SUPPLY 5 V Standby Pin 9 Max 12 V 20 mA 330R AC OK Collector Pin 3 AC OK Emitter Pin 2 (-sense) Transistor On (<0.8 V): AC NOT OK Transistor Off (>4.5 V): AC OK 5 V Standby Return Pin 10 J3 Logic Connector Remote On/Off (Inhibit) Figure 6 INHIBIT HI INHIBIT LOW 800 R POWER SUPPLY 800 R POWER SUPPLY 5 V Standby Pin 9 5 V Standby Pin 9 2-5 mA 100 R 2-5 mA Inhibit Hi Pin 7 sistor On (<0.8 V): NOT OK sistor Off (>4.5 V): OK 100 R Inhibit Hi Pin 7 Inhibit Lo Pin 8 Inhibit Lo Pin 8 5 V Standby Return Pin 10 5 V Standby Return Pin 10 Chassis J3 Logic Connector Signal Chassis J3 Logic Connector High: Power Supply OFF Low or Floating: Power Supply ON Signal High: Power Supply ON Low or Floating: Power Supply OFF Signals - Parallel Load & Current Share Connection Example MHP650PSXX (1) MHP650PSXX (2) V1 Output V1 Output - + Current Share - + MHP650PSXX (3) V1 Output - Current Share + ns e se en -S Se e + se en -S ns e Se + Sens + - Sense Figure 7 - + Load 5 xppower.com Parallel AC OK Connection Power Supply (1) 5 V Standby Pin 9 330R AC OK Collector Pin 3 AC OK Emitter Pin 2 5 V Standby Return Pin 10 J2 Connector Power Supply (2) OK Collector Pin 3 Figure 8 OK Emitter Pin 2 J2 Connector Power Supply (3) AC OK Collector Pin 3 Transistor On (<0.8 V): AC OR DC OK Transistor Off (>4.5 V): AC OR DC NOT OK AC OK Emitter Pin 2 J2 Connector Parallel Remote Inhibit Connection PSU 1 Figure 9 6 PSU 8 PSU 2 Pin 7 Pin 7 Pin 7 Pin 8 Pin 8 Pin 8 Open or TTL high = PSU On Short circuit or TTL Low = PSU Off xppower.com Environmental Characteristic Minimum Operating Temperature -20 Low Temperature Start Up -40 Storage Temperature -40 Typical Maximum Units +70 +85 Notes & Conditions °C Derate linearly from +50 °C at 2.5%/°C to 50% at 70 °C. See fig 10. °C Some specification parameters maybe exceeded until after 20 minutes warm up period. °C Integral variable speed fan load dependant. See fig 11. Non-condensing Cooling Humidity Operating Altitude 5 95 3000 %RH m 3 x 30 g/11 ms shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. Single axis 10-500 Hz at 2 g x 10 sweeps Shock Vibration Temperature Derating Curve 100 Figure 10 90 80 Output Power (%) 70 60 50 40 30 20 10 0 -20 0 +20 +40 +50 +60 +70 Ambient Temperature (ºC) Fan Speed Control 100 Fan Speed (%) Figure 11 50 0 0 25 50 75 100 Output Power (%) Electromagnetic Compatibility - Immunity Phenomenon Harmonic Current ESD Radiated EFT Surges Conducted Magnetic Standard EN61000-3-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Dips and Interruptions EN60601-1-2 Test Level Class A 3 3 3 Installation class 3 3 3 Dip: 30% 10 ms Dip: 60% 100 ms Dip: 100% 5000 ms Dip: 30% 500 ms Criteria Notes & Conditions A A A A A A A B B A Dip: 60% 100 ms A Dip: 100% 10 ms Dip: 100% 5000 ms A B 115 VAC input requires 50% load derating otherwise criteria B 7 xppower.com Electromagnetic Compatibility - Emissions Phenomenon Standard Conducted Radiated Voltage Fluctuations Test Level EN55022 / EN55011 EN55022 / EN55011 EN61000-3-3 Criteria Notes & Conditions Level B Level A Safety Agency Approvals Safety Agency CB Report UL TUV CE Safety Standard Certificate #US/17354/UL, IEC60601-1 Ed 3 Including Risk Management UL File # E146893, ANSI/AAMI ES 60601-1:2005 & CSA C22.2 No. 60601-1:08 TUV Certificate # B11 09 57396 110, EN60601-1:2006 LVD Category Medical Medical Medical Primary to Secondary 2 x MOPP (Means of Patient Protection) Primary to Earth 1 x MOPP (Means of Patient Protection) Equipment Protection Class Safety Standard Notes & Conditions IEC60601-1 Ed 3 See safety agency conditions of acceptibility for details Means of Protection Class I Category IEC60601-1 Ed 3 Mechanical Details - End Fan (Suffix -EF) Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Vo+ L E N Vo- Standard Terminal Block, M3.5 Screw 3 Pins 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) 2.49 (63.3) V1 Adjustment Output On, LED 9.18 (233.2) 2.50 (63.5) 2 x M3 THD both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) Pin 2 AIRFLOW Pin 10 2.86 (72.6) 4.00 (101.6) CL Notes: 1. Dimensions shown in inches (mm). 2. Weight: 2.8 lb (1.25 kg). 8 6.53 (165.8) Pin 9 J3: Logic Connector 8.00 (203.2) 4 x M3 THD 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) Pin 1 1.95 (49.5) 0.87 (22.2) J2 Logic Connector (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense 3 AC OK/Power Fail 4 - Sense 5 Current Share 6 Current Share 7 + Inhibit 8 - Inhibit 9 +5 V Standby (V3) 10 5 V Standby Return (V3) 3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no. SPHD-001T-P0.5. xppower.com Xxxxxxxxxx Details - Top Fan (Suffix -TF) Mechanical Standard Terminal Block, M3.5 Screw 3, Pins 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Vo+ L E Vo- N V1 Adjustment Output On, LED 2.50 (63.5) 8.00 (203.2) 2.58 (65.5) AIRFLOW 2 x M3 THD both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) 1.95 (49.5) Pin 2 Pin 1 Pin 10 pin 9 J3: Logic Connector 2.86 (72.6) 4.00 (101.6) 4 x M3 THD 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) Pin 1 2 3 4 5 6 7 8 9 10 Notes: 1. Dimensions shown in inches (mm). 2. Weight: 2.6 lb (1.2 kg). 0.87 (22.2) 6.53 (165.8) J2 Logic Connector (JST B10B-PHDSS) Function + Sense - Sense AC OK/Power Fail - Sense Current Share Current Share + Inhibit - Inhibit +5 V Standby (V3) 5 V Standby Return (V3) 3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no. SPHD-001T-P0.5. 9 xppower.com Xxxxxxxxxx Details - U Channel (No Suffix) Mechanical Standard Terminal Block M3.5 Screw 3 Pins 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Standard Terminal Block, M4 Screw 6 Pins 9.5 mm Center torque 10.62 lbs-in (1.2 Nm) Vo+ L E Vo- N V1 Adjustment Output On, LED 8.00 (203.2) 2.46 (62.5) 2 x M3 THD both side faces 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) System Airflow Required Pin 2 Pin 1 Pin 10 Pin 9 1.95 (49.5) J3: Logic Connector Pin 1 J1: Fan Connector 4.00 (101.6) CL 2.86 (72.6) 4 x M3 THD 0.15 (3.8) max screw penetration max torque 4.0-5.0 lbs-in (0.45-0.57 Nm) Notes: 1. Dimensions shown in inches (mm). 2. Weight: 2.4 lb (1.1 kg). 3. Requires system airflow, see thermal considerations. 6.53 (165.80) 0.87 (22.2) 4. J1 Mating plug: JST part no. PHR-2, contact: JST part no. SPH-002T-P0.5S. 5. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no. SPHD-001T-P0.5. J2 Logic Connector (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense 3 AC OK/Power Fail 4 - Sense 5 Current Share 6 Current Share 7 + Inhibit 8 - Inhibit 9 +5 V Standby (V3) 10 5 V Standby Return (V3) J1 Fan Connector (JST B2B-PH-KL (LF) (SN) Pin Function 1 +V 2 -V Thermal Considerations (U Channel) Temperature Measurements (Ambient ≤50 ºC) Recommended Maximum Temperature ºC Temperature ºC C55 Capacitor 70 105 T302 Transformer 90 120 C314 Capacitor 70 105 D311 Diode 100 120 Component 10 In order to ensure reliable operation in the end use application the recommended component temperatures listed should not be exceeded. Higher temperatures up to the maximum stated can be used but product lifetime may be reduced. 26-Aug-14 MHP1000 Series • 1200 W High Line Output Power • Rugged Industrial Construction • Variable Speed Fan for Noise Reduction • -40 °C to +70 °C Operation • 5 V Standby • AC OK, Remote On/Off and Active Current Share • Screw Terminals • 3 Year Warranty The MHP1000 AC-DC power supply provides upto 1200 W of output power in a compact rugged mechanical package, suitable for a range of medical applications. The unit comprises of a main output with voltages from 12-48 VDC and a 5 VDC standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of AC input and remote on/off control. Multiple units can be used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage current, and conducted EMC compliance to Class B also simplify higher power system design. Packaged in a compact 9.5” (241 mm) x 5.9” (150 mm) x 2.4” (61 mm) and carrying IEC60601 family safety approvals, the MHP1000 has a load dependant variable speed fan is fully protected with overtemperature shutdown and provides -40 ºC start up with full power from -20 ºC to 50 ºC and 50% power at +70 ºC. xppower.com Models and Ratings Max Output Current V1 Output Voltage V1 <180 VAC 12 V 15 V 24 V 28 V 36 V 48 V >180 VAC 83.0 A 67.0 A 42.0 36.0 28.0 21.0 Max Output Power Standby Supply V2 A A A A 50.0 43.0 34.0 25.0 A A A A <180 VAC 5V 5V 5V 5V 5V 5V / / / / / / 1.0 1.0 1.0 1.0 1.0 1.0 A A A A A A Model Number >180 VAC 1001 W 1010 W 1013 W 1013 W 1013 W 1013 W 1200 W 1200 W 1200 W 1200 W MHP1000PS12 MHP1000PS15 MHP1000PS24 MHP1000PS28 MHP1000PS36 MHP1000PS48 Input Characteristics Characteristic Input Voltage - Operating Input Frequency Minimum 85 47 Typical 115/230 50/60 Units VAC Hz >0.9 Power Factor Input Current - No Load Input Current - Full Load (1000 W) Inrush Current Earth Leakage Current Input Protection Maximum 264 63 EN61000-3-2 class A compliant 0.35/0.5 A 115/230 VAC 10.9/5.3 A 115/230 VAC A μA 230 VAC cold start, 25 ºC 115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.) 60 75/140 250 T20 A/250 V internal fuse in both lines Input Derating Curve Notes & Conditions Derate output power < 90 VAC. See fig. 1. 100 Figure 1 Output Power (%) 90 80 70 60 50 40 85 90 264 Input Voltage (VAC) 2 xppower.com Output Characteristics Characteristic Output Voltage - V1 Initial Set Accuracy Output Voltage Adjustment Minimum Load Start Up Delay Hold Up Time Drift Line Regulation Load Regulation Minimum 12 Typical Maximum 48 ±1 (V1) , ±5 (V2) ±10 ±0.2 ±0.5 ±1 (V1) , ±5 (V2) Units VDC % % A s ms % % % 4 % 1 145 140 % pk-pk % % I nom 0.02 %/˚C °C 0 0.5 20 Transient Response - V1 Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient Overtemperature Protection 115 110 Notes & Conditions See Models and Ratings table 50% load, 115/230 VAC V1 only. See mechanical details. 230 VAC full load After 20 min warm up 90-264 VAC 0-100% load. Recovery within 1% in less than 500 μs for a 50-75% and 75-50% load step V1: 20 MHz bandwidth Vnom DC. Output 1 only, recycle input to reset Output 1 only, auto reset. See fig 2. Auto Recovery, hiccup mode Protects unit from overtemperature. Auto reset. Output Overload Characteristic Output Voltage (V) 14 12 10 8 6 4 Unit enters hiccup mode 2 0 0 5 10 15 20 25 30 35 Output Current (A) Figure 2 Typical V1 Overload Characteristic (MHP1000PS12 shown) 3 xppower.com General Specifications Xxxxxxxxxx Characteristic Efficiency Isolation: Input to Output Input to Ground Output to Ground Switching Frequency Power Density Mean Time Between Failure Weight Minimum Typical 84 Maximum 4000 1500 500 70/200/130 8.9 Units % VAC VAC VDC kHz W/in3 Notes & Conditions See fig 3 & 4 PFC converter / Main converter / Standby 260 kHrs MIL-HDBK-217F at 25 ºC GB 2.1 (940) lb (g) See mechanical details Efficiency vs Load MHP1000PS12 Figure 3 MHP1000PS48 Figure 4 Signals & Control Characteristic Notes & Conditions Signals & Control Remote Sense AC OK / Power Fail Remote On/Off (Inhibit/Enable) 4 Compensates for 0.5 V total voltage drop Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8) AC OK: Provides ≥ 5 ms warning of loss of output from AC failure Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9) Current Share When more than one unit (with the same output voltage) is used in parallel to increase output current, the current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground reference. Units share current within 10% of each other at full load. See fig 7. Standby Supply V2 Isolated 5 V/1.0 A supply, always present when AC supplied. xppower.com Signals & Control AC OK/Power Fail Figure 5 POWER SUPPLY 5 V Standby Pin 9 Max 12 V 20 mA 330R AC OK Collector Pin 3 Transistor On (<0.8 V): AC NOT OK Transistor Off (>4.5 V): AC OK AC OK Emitter Pin 2 (-sense) 5 V Standby Return Pin 10 J2 Logic Connector Remote On/Off (Inhibit) Figure 6 INHIBIT HI INHIBIT LOW 800 R POWER SUPPLY 800 R POWER SUPPLY 5 V Standby Pin 9 5 V Standby Pin 9 2-5 mA 100 R 2-5 mA 100 R Inhibit Hi Pin 7 Inhibit Hi Pin 7 V): V): Inhibit Lo Pin 8 Inhibit Lo Pin 8 5 V Standby Return Pin 10 5 V Standby Return Pin 10 Chassis J3 Logic Connector Signal Chassis J3 Logic Connector High: Power Supply OFF Low or Floating: Power Supply ON Signal High: Power Supply ON Low or Floating: Power Supply OFF Signals - Parallel Load & Current Share Connection Example MHP1000PSXX (1) MHP1000PSXX (2) V1 Output V1 Output - + Current Share - + MHP1000PSXX (3) V1 Output - Current Share + ns e se en -S Se e + se en -S ns e Se + Sens + - Sense Figure 7 - + Load 5 xppower.com Parallel AC OK Connection Power Supply 1 5 V Standby Pin 9 330R AC OK Collector Pin 3 AC OK Emitter Pin 2 5 V Standby Return Pin 10 J3 Connector Power Supply 2 OK Collector Pin 3 Figure 8 OK Emitter Pin 2 J3 Connector Power Supply 3 AC OK Collector Pin 3 Transistor On (<0.8 V): AC NOT OK Transistor Off (>4.5 V): AC OK AC OK Emitter Pin 2 J3 Connector Parallel Remote Inhibit Connection PSU 1 Figure 9 6 PSU 8 PSU 2 Pin 7 Pin 7 Pin 7 Pin 8 Pin 8 Pin 8 Open or TTL high = PSU On Short circuit or TTL Low = PSU Off xppower.com Environmental Xxxxxxxxxx Characteristic Minimum Operating Temperature -20 Low Temperature Start Up -40 Storage Temperature -40 Typical Maximum Units +70 +85 Notes & Conditions °C Derate linearly from +50 ºC at 2.5%/ºC to 50% at 70 ºC. See fig 10. °C Some specification parameters maybe exceeded until after 20 minutes warm up period. °C 2 x integral variable speed fans load dependant. See fig 11. Non-condensing Cooling Humidity Operating Altitude 5 95 3000 %RH m Shock 3 x 30 g/11 ms shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. Vibration Single axis 10-500 Hz at 2 g x 10 sweeps Temperature Derating Curve 100 Figure 10 90 80 Output Power (%) 70 60 50 40 30 20 10 0 -20 0 +20 +40 +50 +60 +70 Ambient Temperature (ºC) Fan Speed Control 100 Fan Speed (%) Figure 11 50 0 0 25 50 75 100 Output Power (%) Electromagnetic Compatibility - Immunity Phenomenon Low Voltage PSU EMC Harmonic Current ESD Radiated EFT Surges Conducted Standard EN61204-3 EN61000-3-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Dips and Interruptions EN60601-1-2 Test Level High severity level Class A 3 3 3 Installation class 3 3 Dip: 30% 25 AC Cycles Dip: 60% 5 AC Cycles Dip: 100% 0.5 AC Cyles Int: >95% 5000 ms Criteria as below A A A A A A A A B Notes & Conditions 230 VAC 100% load, 100 VAC 50% load 7 xppower.com Electromagnetic Compatibility - Emissions Phenomenon Conducted Radiated Voltage Fluctuations Standard EN55011/22 EN55011/22 EN61000-3-3 Test Level Class B Class A Criteria Notes & Conditions Safety Agency Approvals Safety Agency CB Report UL TUV Safety Standard Certificate #US/18260/UL, IEC60601-1 Ed 3 Including Risk Management UL File # E146893, ANSI/AAMI ES 60601-1:2005 & CSA C22.2 No. 60601-1:08 TUV EN60601-1:2006 Primary to Secondary 2 x MOPP (Means of Patient Protection) Primary to Earth 1 x MOPP (Means of Patient Protection) Means of Protection Category Medical Medical Medical Category IEC60601-1 Ed 3 Equipment Protection Class Safety Standard Notes & Conditions Class I IEC60601-1 Ed 3 See safety agency conditions of acceptability for details Mechanical Details VO+ VO- Standard Terminal Block, M6 Screw, 4 Pins 0.62 (16.0) center Torque 26.0 lbs-in (2.94 Nm) 5.90 (149.8) 2.91 (73.9) Output On, LED A V1 Adjustment N 1.47 (37.4) L 2.40 (61.0) 9.48 (240.9) 1.20 (30.5) 9.55 (242.64) Standard Terminal Block, M4 Screw 3 Pins 0.37 (9.5) center Torque 10.62 lbs-in (1.2 Nm) 9.41 (238.9) 4 x M4-0.7 THD both side faces 0.15 (3.8) max screw penetration max torque 10.62 lbs-in (1.2 Nm) B B Airflow 1.20 (30.5) 4 x M4-0.7 THD both side faces 0.15 (3.8) max screw penetration max torque 10.62 lbs-in (1.2 Nm) B B 4.50 (114.3) CL Pin 2 Pin 1 Pin 10 Pin 9 B J3 Logic Connector (JST B10B-PHDSS) Pin Function 1 + Sense 2 - Sense 3 AC OK/Power Fail 4 - Sense 5 Current Share 6 Current Share 7 + Inhibit 8 - Inhibit 9 +5 V Standby 10 -5 V Standby B Detail A J3: Logic Connector 6.70 (170.2) 1.33 (33.8) Notes: 1. Dimensions shown in inches (mm). 2. Weight: 2.8 lb (1.25 kg). 8 3. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no. SPHD-001T-P0.5. 22-Feb-13