GDZ8.2 Diodes Zener diode GDZ8.2 㪇㪅㪊㪏㫧㪇㪅㪇㪊 㪇䌾㪇㪅㪇㪊 㪇㪅㪉㪎㫧㪇㪅㪇㪊 㪇㪅㪊㫧㪇㪅㪇㪌 㪇㪅㪊㫧㪇㪅㪇㪊 zLand size figure (Unit : mm) zConstruction Silicon epitaxial planar 㪇㪅㪈㪐㫧㪇㪅㪇㪊 䌁 㪇㪅㪍㫧㪇㪅㪇㪌 zFeatures 1) 2-pin ultra mini-mold type for high-density mounting(GMD2) 2) High reliability. 3) Can be mounted automatically,using chip mounter.. 㪇㪅㪌㪎㫧㪇㪅㪇㪌 zDimensions (Unit : mm) zApplications Constant voltage control 㪩㪦㪟㪤㩷㪑㩷㪞㪤㪛㪉 㪡㪜㪛㪜㪚㩷㪑㩷㪄 㪡㪜㪠㪫㪘㩷㪑㩷㩷㪄 㪻㫆㫋㩿㫐㪼㪸㫉㩷㫎㪼㪼㫂㩷㪽㪸㪺㫋㫆㫉㫐㪀 zStructure 㪇㪅㪊㪏 㪇㪅㪉㪊 㪇㪅㪊㪈 㪞㪤㪛㪉 zTaping dimensions (Unit : mm) zAbsolute maximum ratings (Ta=25qC) Parameter Power dissipation Junction temperature Storage temperature Operating temperature Symbol P Tj Tstg Topr Limits 100 125 -55 to +125 -55 to +125 Unit mW 㷄 㷄 㷄 Rev.C 1/4 GDZ8.2 Diodes zElectrical characteristics (Ta=25qC) Symbol TYP. Zener voltage䋺Vz(V) Reverse current䋺 IR(PA㪀 MIN. MAX. Iz(mA) MAX. VR(V) 3.740 4.160 5.0 5.0 GDZ 3.9 1.0 GDZ 4.7 5.0 2.0 4.420 4.900 1.0 GDZ 5.1 5.0 2.0 4.840 5.370 1.5 GDZ 5.6 5.0 1.0 5.310 5.920 2.5 GDZ 6.2 5.0 1.0 5.860 6.530 3.0 GDZ 6.8 5.0 0.5 6.470 7.140 3.5 GDZ 7.5 5.0 0.5 7.060 7.840 4.0 GDZ 8.2 7.760 8.640 5.0 0.5 5.0 (1)The zener voltage(Vz) is measured 40ms after power is supplied. zMARKING (Type No.) TYPE GDZ̛3.9 GDZ̛4.7 GDZ̛5.1 GDZ̛5.6 GDZ̛6.2 GDZ̛6.8 GDZ̛7.5 GDZ̛8.2 TYPE䇭NO. LA AA DA EA FA HA JA KA Rev.C 2/4 GDZ8.2 Diodes zElectrical characteristic curves 㪈㪇 㪈 㪏㪅㪉 㪎㪅㪌 㪍㪅㪏 㪍㪅㪉 㪇㪅㪈 㪌㪅㪍 㪌㪅㪈 㪋㪅㪎 㪊㪅㪐 㪇㪅㪇㪈 㪇㪅㪇㪇㪈 㪇 㪇㪅㪌 㪈 㪈㪅㪌 㪉 㪉㪅㪌 㪊 㪊㪅㪌 㪋 㪋㪅㪌 㪌 㪌㪅㪌 㪍 㪍㪅㪌 㪎 㪎㪅㪌 㪏 㪏㪅㪌 㪐 㪐㪅㪌 㪈㪇 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇㪇㪇 㪩㪜㪭㪜㪩㪪㪜㩷㩷㩷㪪㪬㪩㪞㪜㩷㪤㪘㪯㪠㪤㪬㪤 㪧㪦㪮㪜㪩㪑㪧㪩㪪㪤㩿㪮㪀 㪧㪦㪮㪜㪩㩷㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪻㩿㫄㪮㪀 㪉㪇㪇 㪈㪌㪇 㪈㪇㪇 㪌㪇 㪇 㪇 㪉㪌 㪌㪇 㪎㪌 㪈㪇㪇 㪈㪉㪌 㪈㪇㪇㪇 㪧㪩㪪㪤 㫋 㪈㪇㪇 㪈㪇 㪈 㪇㪅㪈 㪇㪅㪇㪇㪈 㪈㪌㪇 㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀 㪧㪻㪄㪫㪸䇭㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇㪅㪇㪉 㪇 㪄㪇㪅㪇㪉 㪄㪇㪅㪇㪋 㪄㪇㪅㪇㪍 㪄㪇㪅㪇㪏 㪉 㪊 㪋 㪌 㪍 㪎 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀 㱏㫑㪄㪭㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪏 㪐 㪈 㪈㪇 㪈㪇㪇 㪈㪇 㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻 㪠㪤㪔㪈㪇㫄㪘 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿䋦㪆㷄㪀 㪇㪅㪇㪋 㪈㪇㪇㪇㪇 㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿㫄㪭㪆㷄㪀 㪈㪇 㪐 㪏 㪎 㪍 㪌 㪋 㪊 㪉 㪈 㪇 㪄㪈 㪄㪉 㪄㪊 㪄㪋 㪄㪌 㪇㪅㪇㪍 㪈 㪇㪅㪈 㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀 㪧㪩㪪㪤㪄㪫㪠㪤㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇㪅㪇㪏 㪇 㪇㪅㪇㪈 㪈㪇㪇㪇 㪈㫄㫊 㫋㫀㫄㪼 㪩㫋㪿㩿㫁㪄㪸㪀 㪊㪇㪇㫌㫊 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㪇㪇 㪈㪇 㪇㪅㪇㪇㪈 㪠㪝㪔㪈㪇㪇㫄㪘 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇㪇 Rev.C 3/4 GDZ8.2 Diodes zElectrical characteristic curves (Ta=25qC) 㪈㪇㪇 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪈 㪇㪅㪇㪈 㪽㪔㪈㪤㪟䌺 㪈㪇 㪫㪸㪔㪎㪌㷄 㪈 㪫㪸㪔㪉㪌㷄 㪇㪅㪈 㪇㪅㪇㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪇㪈 㪇㪅㪇㪇㪇㪈 㪇㪅㪇㪇㪈 㪎㪅㪌 㪏 㪏㪅㪌 㪐 㪐㪅㪌 㪈㪇 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪇㪅㪌 㪈 㪈㪅㪌 㪉 㪉㪅㪌 㪊 㪊㪅㪌 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪋 㪇 㪈 㪏㪅㪍 㪏㪅㪌 㪏㪅㪋 㪏㪅㪊 㪘㪭㪜㪑㪏㪅㪊㪇㪏㪭 㪏㪅㪉 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪌㪭 㫅㪔㪊㪇㫇㪺㫊 㪇㪅㪏 㪇㪅㪎 㪇㪅㪍 㪇㪅㪌 㪇㪅㪋 㪇㪅㪊 㪇㪅㪉 㪇㪅㪈 㪘㪭㪜㪑㪇㪅㪇㪊㪌㫅㪘 㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪐㪇 㪋 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪏㪇 㪎㪇 㪍㪇 㪌㪇 㪋㪇 㪊㪇 㪉㪇 㪈㪇 㪇 㪏㪅㪈 㪈 㪉 㪊 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇 㪇㪅㪐 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪫㪸㪔㪉㪌㷄 㪠㪱㪔㪌㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪈㪇 㪈 㪇 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥㩷 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪎 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪈㪇㪇 㪫㪸㪔㪈㪉㪌㷄 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥㩷 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪈 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪈㪇 㪘㪭㪜㪑㪉㪈㪅㪈㫇㪝 㪇 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 Rev.C 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0