LHR, LGR 4/5000 Series 10...30 Watt AC-DC Converters Input voltage ranges 85...265 V AC 88…168 V DC 1 or 2 outputs up to 48 V DC 4300 V DC I/O electric strength test voltage LGA • Class II equipment (double insulation) • Short circuit protection • Compact, low cost solution Selection chart Output 1 Uo nom Io nom [V DC] [A] 3.3 3 3.3 7 5 2 5 5 12 1.2 12 2.5 15 1 15 2 24 0.6 24 1.25 3.3 1.5 3.3 2.5 +5 1.25 +5 2.5 +5 1 +5 2.5 +12 0.6 +12 1.25 +15 0.5 +15 1.0 +24 0.3 +24 0.625 www.power-one.com Edition 5/07.2001 Output 2 Uo nom Io nom [V DC] [A] +5 1 +5 2.5 -5 1.25 -5 2.5 +12 0.5 +12 1.25 -12 0.6 -12 1.25 -15 0.5 -15 1.0 -24 0.3 -24 0.625 Input voltage Ui 85…264 V AC (47…63 Hz) 88…168 V DC Rated power TA = 50°C Po tot [W] 10 23 10 25 14.4 30 15 30 14.4 30 10 20.8 12.5 25 11 27.5 14.4 30 15 30 15 30 Type LHR 4101-2 LGR 4101-2 LHR 4001-2 LGR 4001-2 LHR 4301-2 LGR 4301-2 LHR 4501-2 LGR 4501-2 LHR 4601-2 LGR 4601-2 LHR 5101-2 LGR 5101-2 LHR 5001-2 LGR 5001-2 LHR 5020-2 LGR 5020-2 LHR 5320-2 LGR 5320-2 LHR 5540-2 LGR 5540-2 LHR 5660-2 LGR 5660-2 1 Board Mountable LHR, LGR 4/5000 Series Input Input voltage Input frequency continuous range 85...264 V AC / 88…168 V DC 47...63 Hz Output Efficiency Output voltage switching noise Line and load regulation Uo1 Line and load regulation Uo2 Minimum load Hold-up time 230 V AC, Io nom Ui nom, Io nom, 20 MHz bandwidth, peak-peak Ui min…Ui max, (10…100%) • Io nom Ui min…Ui max, (10…100%) • Io nom not required on single output types recommended 0.1 Io nom on double output types 110/230 V AC, Io nom up to 86% <1% ±1% ±2% >10 ms Protection Output overload Short circuit No load hiccup mode on LHR types / rectangular on LGR types Control ±80…110% Uo nom Trim /R Safety and EMC Safety marks Electric strength test voltage Electrostatic discharge Electromagnetic field Electr. fast transients/burst Surge Electromagnetic emissions 900 MHz Test UL, ULc, CE I/O IEC/EN 61000-4-2, level 4 (15 kV) IEC/EN 61000-4-3, level 3 (10 V/m) IEC/EN 61000-4-4, level 3 (i, ±2 kV) IEC/EN 61000-4-5, level 3 (2 kV) CISPR 22/EN 55022, conducted ENV50204, 3V/m 3000 V AC criterion A criterion A criterion A criterion A class B criterion A Environmental Ambient temperature Storage temperature Relative humidity Shock Random vibration Ui nom, Io nom, convection cooled non operational non condensing peak acceleration –10...50°C –40...100°C 5...95% 20 gn 2 gn rms Options Trim pin not fitted www.power-one.com Edition 5/07.2001 (single output units only) 2 LHR, LGR 4/5000 Series 10...30 Watt AC-DC Converters Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. European Projection 40.6 (1.59") LHR 7.6 (0.3") 5 ø 0.8x0.8 6 3 4 41.7 (1.64") 66 (2.60") 76.2 (3") 10.1 (0.4") S09005 1 4.5 (0.18") 2 25.4 (1") 23 (0.91") +0.5/-0 50.8 (2") Measuring point of case temperature TC LGR S09006 7 6 5 3 4 54.4 (2.14") 81.2 (3.2") 88.9 (3.5") ø 0.8 x 0.8 2 1 4.5 (0.18") 25.4 (1") 55.9 (2.28") 63.5 (2.5") Measuring point of case temperature TC www.power-one.com Edition 5/07.2001 3 Board Mountable LHR, LGR 4/5000 Series Pin allocation LHR Pin 1 2 3 4 5 6 1 Electrical determination Input voltage Input voltage Output positive Control input Trim Output negative Output return potential Output return potential or positive LHR 4/5000 Single L N Vo+ …/Trim Von.c. Dual L N Vo+ …/Trim1 Vo Go Dual assym. L N Vo1+ …/Trim1 Go Vo2+ Dual L N Vo+ …/R1 Go Vo- Dual assym. L N Vo1+ …/R1 Go Vo2+ Pin not fitted with option K. Pin allocation LGR Pin 1 2 3 4 5 6 7 1 Electrical determination Input voltage Input voltage Output positive Control input Trim Output return potential not used R input Output negative or positive LGR 4/5000 Single L N Vo+ Vo …/R1 - Pin not fitted with option K. www.power-one.com Edition 5/07.2001 4