MMBD7000-V Vishay Semiconductors Small Signal Switching Diode, Dual Features • Silicon Epitaxial Planar Diode • Fast switching dual diode, especially suited for automatic insertion • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 3 1 2 18109 Mechanical Data Case: SOT-23 Weight: approx. 8.8 mg Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/box Parts Table Part MMBD7000-V Ordering code Type Marking Remarks MMBD7000-V-GS18 or MMBD7000-V-GS08 M5C Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Symbol Value Reverse voltage VR 100 V Forward current (continuous) IF 200 mA IFSM 500 mA Ptot 225 mW Ptot 1.8 mW/K Ptot 300 mW Ptot 2.4 mW/K Non-repetitive peak forward current Power dissipation on FR-5 board Total device dissipation on Alumina substrate Document Number 85736 Test condition t=1s Derate above 25 °C Derate above 25 °C Unit www.vishay.com For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 13-May-11 MMBD7000-V Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit RthJA 4171) K/W RthJA 5562) K/W Tj 150 °C Tstg - 55 to + 150 °C Typical thermal resistance, junction to ambient air Maximum junction temperature Storage temperature range 1) Device on alumina substrate 2) On FR-5 board Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Max. Unit 1 A IR 3 A VR = 50 V, Tj = 125 ° C IR 100 A IF = 1 mA VF 0.55 0.70 V IF = 10 mA VF 0.67 0.82 V IF = 100 mA VF 0.75 1.10 V VR = 0, f = 1 MHz CD 1.5 pF IF = 10 mA to IR = 10 mA, Irr = 1 mA, RL = 100 Irr 4 ns Reverse breakdown voltage Leakage current Forward voltage Diode capacitance Reverse recovery time Test condition Symbol Min. IR = 100 A V(BR) 100 VR = 50 V IR VR = 100 V Typ. V Package Dimensions in millimeters (inches): SOT-23 0.9 (0.035) 1.15 (0.045) 0° t o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 3.1 (0.122) 2.8 (0.110) 0.5 (0.020) 0.45 (0.018) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 www.vishay.com For technical questions within your region, please contact one of the following: Document Number 85736 [email protected], [email protected], [email protected] Rev. 1.4, 13-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000