A428316 Series 256K X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Document Title 256K X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Revision History History Issue Date Remark 0.0 Initial issue June 13, 2001 Preliminary 0.1 Modify AC data April 26, 2002 0.2 Modify DC data and all parts guarantee self-refresh mode June 10, 2002 0.3 Delete -30,-40 grade and add -25 grade August 20, 2002 1.0 Final version release July 31, 2003 1.1 Add Pb-Free order April 9, 2004 1.2 Remove the self-refresh mode February 24, 2009 Rev. No. (February, 2009, Version 1.2) Final AMIC Technology, Corp. A428316 Series 256K X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Features Industrial operating temperature range: -40°C to 85°C for -U Fast Page Mode with Extended Data Out Separate CAS ( UCAS , LCAS ) for byte selection Organization: 262,144 words X 16 bits Part Identification - A428316 (512 Ref.) Single 5.0V power supply/built-in VBB generator Low power consumption - Operating: 110mA (-25 max) - Standby: 2.5mA (TTL), 1.0mA (CMOS) High speed - 25/35 ns RAS access time - 12/17 ns column address access time - 8/10 ns CAS access time - 12/16 ns EDO Page Mode Cycle Time 512 Refresh Cycle in 8ms Read-modify-write, RAS -only, CAS -before- RAS , Hidden refresh capability TTL-compatible, three-state I/O JEDEC standard packages - 400mil, 40-pin SOJ - 400mil, 40/44 TSOP type II package All Pb-free (Lead-free) products are RoHS compliant General Description The A428316 is a new generation randomly accessed memory for graphics, organized in a 262,144-word by 16bit configuration. This product can execute Byte Write and Byte Read operation via two CAS pins. The A428316 offers an accelerated Fast Page Mode cycle with a feature called Extended Data Out (EDO). This allow random access of up to 512 words within a row at a 83/62 MHz EDO cycle, making the A428316 ideally suited for graphics, digital signal processing and high performance computing systems. Pin Configuration Pin Descriptions SOJ 16 17 18 19 20 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 VSS I/O15 I/O14 I/O13 I/O12 VSS I/O11 I/O10 I/O9 I/O8 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS (February, 2009, Version 1.2) VCC I/O0 I/O1 I/O2 I/O3 VCC I/O4 I/O5 I/O6 I/O7 NC NC WE RAS NC A0 A1 A2 A3 VCC 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 19 20 21 22 A428316V A3 VCC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A428316S VCC I/O0 I/O1 I/O2 I/O3 VCC I/O4 I/O5 I/O6 I/O7 NC NC WE RAS NC A0 A1 A2 TSOP Symbol 44 43 42 41 40 39 38 37 36 35 VSS I/O15 I/O14 I/O13 I/O12 VSS I/O11 I/O10 I/O9 I/O8 32 31 30 29 28 27 26 25 NC 24 23 Description A0 – A8 Address Inputs I/O0 - I/O15 Data Input/Output RAS Row Address Strobe LCAS Column Address Strobe for Lower Byte (I/O0 – I/O7) UCAS Column Address Strobe for Upper Byte (I/O8 – I/O15) LCAS UCAS OE A8 A7 A6 A5 A4 VSS 1 WE Write Enable OE Output Enable VCC 5.0V Power Supply VSS Ground NC No Connection AMIC Technology, Corp. A428316 Series Selection Guide Symbol Description -25 -35 Unit tRAC Maximum RAS Access Time 25 35 ns tAA Maximum Column Address Access Time 12 17 ns tCAC Maximum CAS Access Time 8 10 ns tOEA Maximum Output Enable ( OE ) Access Time 8 10 ns tRC Minimum Read or Write Cycle Time 44 62 ns tPC Minimum EDO Cycle Time 12 16 ns Functional Description The A428316 reads and writes data by multiplexing an 18-bit address into a 9-bit row and 9-bit column address. RAS and CAS are used to strobe the row address and the column address, respectively. The A428316 has two CAS inputs: LCAS controls I/O0I/O7, and UCAS controls I/O8 - I/O15, UCAS and LCAS function in an identical manner to CAS in that either will generate an internal CAS signal. The CAS function and timing are determined by the first CAS ( UCAS or LCAS ) to transition low and by the last to transition high. Byte Read and Byte Write are controlled by using LCAS and UCAS separately. A Read cycle is performed by holding the WE signal high during RAS / CAS operation. A Write cycle is executed by holding the WE signal low during RAS / CAS operation; the input data is latched by the falling edge of WE or CAS , whichever occurs later. The data inputs and outputs are routed through 16 common I/O pins, with RAS , CAS , WE and OE controlling the in direction. EDO Page Mode operation all 512 columns within a selected row to be randomly accessed at a high data rate. A EDO Page Mode cycle is initiated with a row address latched by RAS followed by a column address latched by CAS . While holding RAS low, CAS can be toggled to strobe changing column addresses, thus achieving shorter cycle times. (February, 2009, Version 1.2) The A428316 offers an accelerated Fast Page Mode cycle through a feature called Extended Data Out, which keeps the output drivers on during the CAS precharge time (tcp). Since data can be output after CAS goes high, the user is not required to wait for valid data to appear before starting the next access cycle. Data-out will remain valid as long as RAS and OE are low, and WE is high; this is the only characteristic which differentiates Extended Data Out operation from a standard Read or Fast Page Read. A memory cycle is terminated by returning both RAS and CAS high. Memory cell data will retain its correct state by maintaining power and accessing all 512 combinations of the 9-bit row addresses, regardless of sequence, at least once every 8ms through any RAS cycle (Read, Write) or RAS Refresh cycle ( RAS -only, CBR, or Hidden). The CBR Refresh cycle automatically controls the row addresses by invoking the refresh counter and controller. Power-On The initial application of the VCC supply requires a 200 µs wait followed by a minimum of any eight initialization cycles containing a RAS clock. During Power-On, the VCC current is dependent on the input levels of RAS and CAS . It is recommended that RAS and CAS track with VCC or be held at a valid VIH during Power-On to avoid current surges. 2 AMIC Technology, Corp. A428316 Series Block Diagram OE WE OE Clock Generator W E Clock Generator UCAS CAS Clock Generator LCAS I/O0 Data I/O Buffers AY0 - AY8 Column Address Buffers Column Decoders to I/O15 Sense Amplifiers A0 - A8 . . Row Address Buffers AX0 - AX8 ROW DECODER Refresh Counter & Controller . . . 512 . . . 512 x 16 . . Memory Array 512 x 512 x 16 VCC RAS Clock Generator RAS VSS Recommended Operating Conditions Symbol Description (Ta = 0°C to +70°C or -40°C to +85°C) Min. Typ. Max. Unit Notes VCC Power Supply 4.5 5.0 5.5 V 1 VSS Input High Voltage 0.0 0.0 0.0 V 1 VIH Input High Voltage 2.4 - VCC + 1.0 V 1 VIL Input Low Voltage -0.5 - 0.8 V 1 (February, 2009, Version 1.2) 3 AMIC Technology, Corp. A428316 Series Truth Table Function RAS UCAS LCAS Standby H H Read: Word L L Read: Lower Byte L Read: Upper Byte L Write: Word Write: Lower Byte Address I/Os Notes WE OE H X X X High-Z L H L Row/Col. Data Out H L H L Row/Col. I/O0-7 = Data Out I/O8-15 = High-Z L H H L Row/Col. I/O0-7 = High-Z I/O8-15 = Data Out L L L L H Row/Col. Data In L H L L H Row/Col. I/O0-7 = Data In I/O8-15 = X Write: Upper Byte L L H L H Row/Col. I/O0-7 = X I/O8-15 = Data In Read-Write L L L H→L L→H Row/Col. Data Out → Data In 1,2 EDO-Page-Mode Read: Hi-Z -First cycle -Subsequent Cycles L L H→L H→L H→L H→L H→L H H H→L Row/Col. Col. Data Out Data Out 2 2 EDO-Page-Mode Write -First cycle -Subsequent Cycles L L H→L H→L H→L H→L L L H H Row/Col. Col. Data In Data In 1 1 EDO-Page-Mode Read-Write -First cycle -Subsequent Cycles L L H→L H→L H→L L→H Data Out → Data In H→L H→L H→L L→H Row/Col. Col. Data Out → Data In 1, 2 1, 2 Hidden Refresh Read L→H→L L L H L Row/Col. Data Out 2 Hidden Refresh Write L→H→L L L L X Row/Col. Data In → High-Z 1 L H H X X Row High-Z H→L L L X X X High-Z RAS -Only Refresh CBR Refresh Note: 3 1. Byte Write may be executed with either UCAS or LCAS active. 2. Byte Read may be executed with either UCAS or LCAS active. 3. Only one CAS signal ( UCAS or LCAS ) must be active. (February, 2009, Version 1.2) 4 AMIC Technology, Corp. A428316 Series Absolute Maximum Ratings* *Comments Input Voltage (Vin) . . . . . . . . . . . . . . . . . . . . -1.0V to +7.0V Output Voltage (Vout) . . . . . . . . . . . . . . . . . -1.0V to +7.0V Power Supply Voltage (VCC) . . . . . . . . . . . -1.0V to +7.0V Operating Temperature (TOPR) . . . . . . . . . . . . 0°C to +70°C Storage Temperature (TSTG) . . . . . . . . . . . -55°C to +150°C Soldering Temperature X Time (TSOLDER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C X 10sec Power Dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . . . 1W Short Circuit Output Current (Iout) . . . . . . . . . . . . . . 50mA Latch-up Current . . . . . . . . . . . . . . . . . . . . . . .. . . . 200mA Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to this device. These are stress ratings only. Functional operation of this device at these or any other conditions above those indicated in the operational sections of these specification is not implied or intended. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability. DC Electrical Characteristics (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Symbol Parameter -25 -35 Unit Min. Max. Min. Max. Test Conditions IIL Input Leakage Current -5 +5 -5 +5 μA 0V ≤ Vin ≤ VCC Pins not under Test = 0V IOL Output Leakage Current -5 +5 -5 +5 μA DOUT disabled, 0V ≤ Vout ≤ VCC ICC1 Operating Power Supply Current - 115 - 105 mA RAS , UCAS , LCAS and Address cycling; tRC = min. ICC2 TTL Supply Current Supply Current - 2.5 - 2.5 mA RAS = UCAS = LCAS = VIH ICC3 Average Power Supply Current, RAS Refresh Mode - 115 - 105 mA RAS and Address cycling, UCAS = LCAS = VIH, tRC = min. ICC4 EDO Page Mode Average Power Supply Current - 115 - 105 mA RAS and address = VIL, UCAS , LCAS and Address cycling; tPC = min. ICC5 CAS -before- RAS Refresh Power Supply Current - 115 - 105 mA RAS and UCAS or LCAS cycling; tRC = min. ICC6 CMOS Standby Power Supply Current - 1.0 - 1.0 mA RAS = UCAS = LCAS = VCC - 0.2V 2.4 - 2.4 - V IOUT = -5.0mA - 0.4 - 0.4 V IOUT = 4.2mA VOH VOL Output Voltage (February, 2009, Version 1.2) 5 Notes 1, 2 1 1, 2 1 AMIC Technology, Corp. A428316 Series AC Characteristics (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Test Conditions: Input timing reference level: VIH/VIL=2.4V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns # Std Symbol -25 -35 Parameter Min. Max. Min. Max. Unit Notes 4, 5 tT Transition Time (Rise and Fall) 1 50 1 50 ns 1 tRC Random Read or Write Cycle Time 44 - 62 - ns 2 tRP RAS Precharge Time 15 - 23 - ns 3 tRAS RAS Pulse Width 25 10K 35 10K ns 4 tCAS CAS Pulse Width 4 10K 6 10K ns 5 tRCD RAS to CAS Delay Time 10 21 10 25 ns 6 6 tRAD RAS to Column Address Delay Time 8 14 8 18 ns 7 7 tRSH CAS to RAS Hold Time 5 - 6 - ns 8 tCSH CAS Hold Time 25 - 31 - ns 9 tCRP CAS to RAS Precharge Time 5 - 5 - ns 10 tASR Row Address Setup Time 0 - 0 - ns 11 tRAH Row Address Hold Time 5 - 6 - ns 12 tCLZ CAS to Output in Low Z 3 - 3 - ns 8 13 tRAC Access Time from RAS - 25 - 35 ns 6,7 14 tCAC Access Time from CAS - 8 - 10 ns 6, 13 15 tAA Access Time from Column Address - 12 - 17 ns 7, 13 16 tOEA OE Access Time - 8 - 10 ns 17 tAR Column Address Hold Time from RAS 22 - 31 - ns 18 tRCS Read Command Setup Time 0 - 0 - ns 19 tRCH Read Command Hold Time 0 - 0 - ns 9 20 tRRH Read Command Hold Time Reference to RAS 0 - 0 - ns 9 21 tRAL Column Address to RAS Lead Time 12 - 17 - ns 22 tCOH Output Hold After CAS Low 3 - 3 - ns (February, 2009, Version 1.2) 6 AMIC Technology, Corp. A428316 Series AC Characteristics (continued) (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Test Conditions: Input timing reference level: VIH/VIL=2.4V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns # -25 Std Symbol -35 Parameter Min. Max. Min. Max. Unit Notes 8, 10 23 tOFF Output Buffer Turn-Off Delay Time - 3 - 3 ns 24 tASC Column Address Setup Time 0 - 0 - ns 25 tCAH Column Address Hold Time 5 - 6 - ns 26 tOES OE Low to CAS High Set Up 5 - 7 - ns 27 tWCS Write Command Setup Time 0 - 0 - ns 11 28 tWCH Write Command Hold Time 5 - 6 - ns 11 29 tWCR Write Command Hold Time to RAS 22 - 31 - ns 30 tWP Write Command Pulse Width 5 - 6 - ns 31 tRWL Write Command to RAS Lead Time 7 - 10 - ns 32 tCWL Write Command to CAS Lead Time 5 - 7 - ns 33 tDS Data-in setup Time 0 - 0 - ns 12 34 tDH Data-in Hold Time 5 - 6 - ns 12 35 tDHR Data-in Hold Time to RAS 22 - 31 - ns 36 tRWC Read-Modify-Write Cycle Time 62 - 85 - ns 37 tRWD RAS to WE Delay Time (Read-Modify-Write) 34 - 46 - ns 11 38 tCWD CAS to WE Delay Time (Read-Modify-Write) 17 - 21 - ns 11 39 tAWD Column Address to WE Delay Time (Read-Modify-Write) 21 - 28 - ns 11 40 tOEH OE Hold Time from WE 5 - 6 - ns 41 tOEP OE High Pulse Width 5 - 5 - ns 42 tPC Read or Write Cycle Time (EDO Page) 12 - 16 - ns 43 tCPA Access Time from CAS Precharge (EDO Page) - 14 - 18 ns (February, 2009, Version 1.2) 7 14 AMIC Technology, Corp. A428316 Series AC Characteristics (continued) (VCC = 5.0V ± 10%, VSS = 0V, Ta = 0°C to +70°C or -40°C to +85°C) Test Conditions: Input timing reference level: VIH/VIL=2.4V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns # -25 Std Symbol -35 Parameter Unit Min. Max. Min. Max. Notes 44 tCP CAS Precharge Time 4 - 6 - ns 45 tPCM EDO Page Mode RMW Cycle Time 32 - 40 - ns 46 tCRW EDO Page Mode CAS Pulse Width (RMW) 24 - 30 - ns 47 tRASP RAS Pulse Width (EDO Page) 30 200K 35 200K ns 48 tCSR CAS Setup Time ( CAS -before- RAS ) 5 - 5 - ns 3 49 tCHR CAS Hold Time ( CAS -before- RAS ) 7 - 10 - ns 3 50 tRPC RAS to CAS Precharge Time 10 - 10 - ns 3 51 tOEZ Output Buffer Turn-off Delay from OE - 3 - 3 ns 8 Notes: 1. ICC1, ICC3, ICC4, and ICC5 depend on cycle rate. 2. ICC1 and ICC4 depend on output loading. Specified values are obtained with the outputs open. 3. An initial pause of 200μs is required after power-up followed by any 8 RAS cycles before proper device operation is achieved. In the case of an internal refresh counter, a minimum of 8 CAS -before- RAS initialization cycles instead of 8 RAS cycles are required. 8 initialization cycles are required after extended periods of bias without clocks. 4. AC Characteristics assume tT = 2ns. All AC parameters are measured with a load equivalent to two TTL loads and 50pF, VIL (min.) ≥ GND and VIH (max.) ≤ VCC. 5. VIH (min.) and VIL (max.) are reference levels for measuring timing of input signals. Transition times are measured between VIH and VIL. 6. Operation within the tRCD (max.) limit insures that tRAC (max.) can be met. tRCD (max.) is specified as a reference point only. If tRCD is greater than the specified tRCD (max.) limit, then access time is controlled exclusively by tCAC. 7. Operation within the tRAD (max.) limit insures that tRAC (max.) can be met. tRAD (max.) is specified as a reference point only. If tRAD is greater than the specified tRAD (max.) limit, then access time is controlled exclusively by tAA. 8. Assumes three state test load (5pF and a 500Ω Thevenin equivalent). 9. Either tRCH or tRRH must be satisfied for a read cycle. 10. tOFF (max.) defines the time at which the output achieves the open circuit condition; it is not referenced to output voltage levels. 11. tWCS, tWCH, tRWD, tCWD and tAWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS ≥ tWCS (min.) and tWCH ≥ tWCH (min.), the cycle is an early write cycle and data-out pins will remain open circuit, high impedance, throughout the entire cycle. If tRWD ≥ tRWD (min.) , tCWD ≥ tCWD (min.) and tAWD ≥ tAWD (min.), the cycle is a read-modify-write cycle and the data out will contain data read from the selected cell. If neither of the above conditions is satisfied, the condition of the data out at access time is indeterminate. 12. These parameters are referenced to UCAS and LCAS leading edge in early write cycles and to WE leading edge in read-modify-write cycles. 13. Access time is determined by the longer of tAA or tCAC or tCPA. 14. tASC ≥ tCP to achieve tPC (min.) and tCPA (max.) values. (February, 2009, Version 1.2) 8 AMIC Technology, Corp. A428316 Series Word Read Cycle tRC(1) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCRP(9) tCAS(4) UCAS LCAS tRAD(6) tASR(10) A0~A8 tRAL(21) tRAH(11) tASC(24) Row Address tCAH(25) Column Address tAR(17) tRCH(19) tRCS(18) tRRH(20) WE tOEA(16) OE tCAC(14) tAA(15) tRAC(13) I/O 0 ~ I/O 15 tOFF(23) tOEZ(51) High-Z Valid Data-out tCLZ(12) : High or Low (February, 2009, Version 1.2) 9 AMIC Technology, Corp. A428316 Series Word Write Cycle (Early Write) tRC(1) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) UCAS tCRP(9) tCAS(4) LCAS tAR(17) tRAD(6) tASR(10) tRAL(21) tRAH(11) tCAH(25) tASC(24) A0~A8 Row Address Column Address tWCR(29) tCWL(32) tRWL(31) tWP(30) WE tWCS(27) tWCH(28) OE tDHR(35) tDS(33) I/O0 ~ I/O 15 tDH(34) Valid Data-in : High or Low (February, 2009, Version 1.2) 10 AMIC Technology, Corp. A428316 Series Word Write Cycle (Late Write) tRC(1) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) UCAS tCRP(9) tCAS(4) LCAS tAR(17) tRAD(6) tASR(10) tRAL(21) tRAH(11) tCAH(25) tASC(24) A0~A8 Row Address Column Address tCWL(32) tRWL(31) tWCR(29) tWP(30) WE tOEH(40) OE tDHR(35) tDS(33) I/O0 ~ I/O 15 tDH(34) High-Z Vaild Data-in : High or Low (February, 2009, Version 1.2) 11 AMIC Technology, Corp. A428316 Series Word Read-Modify-Write Cycle tRWC(36) tRAS(3) tRP(2) RAS tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCRP(9) UCAS LCAS tAR(17) tRAD(6) tASR(10) A0~A8 tRAH(11) tASC(24) Row Address tCAH(25) Column Address tAWD(39) tCWL(32) tCWD(38) tRCS(18) tRWD(37) tRWL(31) WE tWP(30) tOEA(16) tOEZ(51) OE tOEH(40) tCAC(14) tAA(15) tDS(33) tDH(34) tRAC(13) I/O 0 ~ I/O 15 High-Z Data-out Data-in tCLZ(12) : High or Low (February, 2009, Version 1.2) 12 AMIC Technology, Corp. A428316 Series EDO Page Mode Word Read Cycle tRASP(47) tRP(2) RAS tCSH(8) tCRP(9) tPC(42) tRSH(7) tCRP(9) tRCD(5) tCP(44) tCAS(4) tCAS(4) tCAS(4) UCAS LCAS tCSH(8) tAR(16) tRAL(21) tCAH(25) tRAD(6) tASR(10) A0~A8 tCAH(25) tRAH(11) tASC(24) tASC(24) Row Column Column tCAH(25) Column tRCS(18) tRCS(18) tRCH(19) tRCH(25) tRCS(18) WE tAA(15) tAA(15) tRRH(20) tCPA(43) tOEA(16) tOEA(16) tOES(26) OE tCAC(14) tRAC(13) tCAC(14) tOEP(41) tCOH(22) tCLZ(12) I/O 0 ~ I/O 15 Data-out tOFF(23) tCAC(14) tOEZ(51) tOEZ(51) Data-out Data-out tCLZ(12) : High or Low (February, 2009, Version 1.2) 13 AMIC Technology, Corp. A428316 Series EDO Page Mode Early Word Write Cycle tRASP(47) tRP(2) RAS tCSH(8) tPC(42) tRSH(7) tCRP(9) tCRP(9) tRCD(5) tCAS(4) tCP(44) tCAS(4) tCP(44) tCAS(4) UCAS LCAS tRAL(21) tRAD(6) tASR(10) A0~A8 tCAH(25) tRAH(11) tASC(24) Row tCAH(25) tASC(24) tCAH(25) tASC(24) Column Column tCWL(32) tCWL(32) Column tCWL(32) tRWL(31) tWCS(27) tWCS(27) tWCS(27) tWCH(28) tWCH(28) tWCH(28) WE tWP(30) tWP(30) tWP(30) OE tDH(34) tDS(33) I/O 0 ~ I/O 15 tDH(34) tDS(33) Data-in tDH(34) tDS(33) Data-in Data-in : High or Low (February, 2009, Version 1.2) 14 AMIC Technology, Corp. A428316 Series EDO Page Mode Word Read-Modify-Write Cycle tRP(2) tRASP(47) RAS tCSH(8) tCRP(9) tPCM(45) tRSH(7) tCRP(9) tRCD(5) tCRW(46) tCP(44) tCP(44) tCRW(46) tCRW(46) UCAS LCAS tRAL(21) tRAD(6) tASR(10) tCAH(25) tRAH(11) A0~A8 Row tCAH(25) tCAH(25) tASC(24) tASC(24) Column tASC(24) Column Column tCWL(32) tCWL(32) tCWL(32) tRWD(37) tRWL(31) tRCS(18) tCWD(38) tCWD(38) tCWD(38) WE tWP(30) tAWD(39) tWP(30) tAWD(39) tOEA(16) tWP(30) tAWD(39) tOEA(16) tOEA(16) OE tOEH(40) tCAC(14) tCPA(43) tAA(15) tOEZ(51) tAA(15) tOEZ(51) tDH(34) tRAC(13) tOEZ(51) tDH(34) tDH(34) tDS(33) tDS(33) tDS(33) I/O 0 ~ I/O 15 tCPA(43) tAA(15) High-Z tCLZ(12) tCLZ(12) tCLZ(12) Data-in Data-out Data-in Data-out Data-in Data-out : High or Low (February, 2009, Version 1.2) 15 AMIC Technology, Corp. A428316 Series RAS Only Refresh Cycle tRC(1) tRAS(3) tRP(2) RAS tRPC(50) tCRP(9) UCAS LCAS tASR(10) tRAH(11) Row A0~A8 Note: WE, OE = Don't care. : High or Low CAS Before RAS Refresh Cycle tRC(1) tRP(2) tRAS(3) tRP(2) RAS tRPC(50) tCHR(49) tCSR(48) tCP(44) UCAS LCAS tOFF(23) High-Z I/O 0 ~ I/O 15 Note: WE, OE, Address = Don't care. (February, 2009, Version 1.2) : High or Low 16 AMIC Technology, Corp. A428316 Series Hidden Refresh Cycle (Word Read) tRC(1) tRC(1) tRAS(3) tRP(2) tRAS(3) tRP(2) RAS tAR(17) tCRP(9) tRSH(7) tRCD(5) tCHR(49) tCRP(9) UCAS LCAS tRAD(6) tASR(10) tRAL(21) tCAH(25) tRAH(11) tASC(24) A0~A8 Row Column tRCS(18) tRRH(20) WE tAA(15) tOEZ(51) tOEA(16) OE tCAC(14) tOFF(23) tCLZ(12) tRAC(13) I/O 0 ~ I/O 15 High-Z Valid Data-out : High or Low (February, 2009, Version 1.2) 17 AMIC Technology, Corp. A428316 Series Hidden Refresh Cycle (Early Word Write) tRC(1) tRC(1) tRAS(3) tRP(2) tRAS(3) tRP(2) RAS tAR(17) tCRP(9) tRSH(7) tRCD(5) tCHR(49) tCRP(9) UCAS LCAS tRAD(6) tASR(10) tRAH(11) tRAL(21) tCAH(25) tASC(24) A0~A8 Row Column tWCS(27) tWCH(28) tWP(30) WE OE tDS(33) I/O 0 ~ I/O 15 tDH(34) Valid Data-in : High or Low (February, 2009, Version 1.2) 18 AMIC Technology, Corp. A428316 Series EDO Page Mode Read-Early-Write Cycle (Pseudo Read-Modify-Write) tRP(2) tRASP(47) RAS tCSH(8) tPC(42) tRCD(5) tCRP(9) tCAS(4) tPC(42) tCP(44) tCAS(4) tRSH(7) tCP(44) tCAS(4) tCPR(9) UCAS LCAS tRAL(21) tRAD(6) tASR(10) A0~A8 tASC(24) tRAH(11) tASC(24) Row tCAH(25) tASC(24) tCAH(25) Column Column tCAH(25) Column tRCH(19) tRCS(18) tWCS(27) WE tWCH(28) tAA(15) tAA(15) tCAP(43) tDS(33) tDH(34) tRAC(13) tCAC(14) tCAC(14) tOEA(16) OE tCOH(22) I/O 0 ~ I/O 15 Data-out Data-out Data-in : High or Low (February, 2009, Version 1.2) 19 AMIC Technology, Corp. A428316 Series Capacitance (f = 1MHz, Ta = Room Temperature, VCC = 5.0V ± 10%) Symbol Signals CIN1 A0 - A8 CIN2 RAS , UCAS , Parameter Max. Unit Test Conditions 5 pF Vin = 0V Input Capacitance 7 pF Vin = 0V I/O Capacitance 7 pF Vin = Vout = 0V LCAS , WE , OE CI/O I/O0 - I/O15 Ordering Codes Part No. Access Time (ns) Package A428316S-25 40L SOJ A428316S-25F 40L Pb-Free SOJ A428316V-25 40/44L TSOP(II) 25 A428316V-25U 40/44L TSOP(II) A428316V-25F 40/44L Pb-Free TSOP(II) A428316V-25UF 40/44L Pb-Free TSOP(II) A428316S-35 40L SOJ A428316S-35F 40L Pb-Free SOJ 40/44L TSOP(II) A428316V-35 35 A428316V-35U 40/44L TSOP(II) A428316V-35F 40/44L Pb-Free TSOP(II) A428316V-35UF 40/44L Pb-Free TSOP(II) Note: -U is for industrial operating temperature range. (February, 2009, Version 1.2) 20 AMIC Technology, Corp. A428316 Series Package Information SOJ 40L (400mil) Outline Dimensions 21 1 20 E 40 HE unit: inches/mm L A A2 C D b b1 A1 e D S Seating Plane Symbol e1 y θ Dimensions in inches Min Nom Max Dimensions in mm Min Nom Max 3.66 A - - 0.144 - - A1 0.025 - - 0.64 - - A2 0.105 0.110 0.115 2.67 2.79 2.92 b1 0.026 0.028 0.032 0.66 0.71 0.81 0.56 b 0.016 0.018 0.022 0.41 0.46 C 0.008 0.010 0.014 0.20 0.25 0.36 D 1.020 1.025 1.030 25.91 26.04 26.16 E 0.395 0.400 0.405 10.03 10.16 10.29 e 0.044 0.050 0.056 1.12 1.27 1.42 e1 0.355 0.366 0.376 9.114 9.383 9.652 HE 0.430 0.440 0.450 10.92 11.18 11.43 L 0.081 0.093 0.105 2.083 2.39 2.70 S - - 0.050 - - 1.27 y - - 0.004 - - 0.10 θ 0° - 10° 0° - 10° Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension e1 is for PC Board surface mount pad pitch design reference only. 4. Dimension S includes end flash. (February, 2009, Version 1.2) 21 AMIC Technology, Corp. A428316 Series Package Information TSOP 40/44L (Type II) (400mil) Outline Dimensions unit: inches/mm HE E 44 θ L L1 1 B e D S A A1 A2 c D y L Dimensions in inches L1 Dimensions in mm Symbol Min Nom Max Min Nom Max A - - 0.047 - - 1.20 A1 0.002 - 0.006 0.05 - 0.15 A2 0.037 0.039 0.041 0.95 1.00 1.05 B 0.013 0.015 0.017 0.32 0.37 0.42 c 0.003 0.005 0.009 0.08 0.13 0.23 D 0.720 0.725 0.730 18.28 18.41 18.54 E 0.395 0.400 0.405 10.03 10.16 10.29 e 0.031 BSC 0.80 BSC HE 0.455 0.463 0.471 11.56 11.76 11.96 0.60 L 0.016 0.020 0.024 0.40 0.50 L1 - 0.031 - - 0.80 - S - - 0.035 - - 0.90 y - - 0.004 - - 0.10 θ 1° 3° 5° 1° 3° 5° Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension S includes end flash. (February, 2009, Version 1.2) 22 AMIC Technology, Corp.