MMD J16AA3 5mm x 3.2mm x 4 pads ceramic package Datasheet

J Series Crystal
¾
5mm X 3.2mm X 4 Pads Ceramic Package
¾
Wide Frequency Range
¾
Tight Tolerance and Stability
¾
Tape and Reel Packaging
ESR CHART:
ELECTRICAL SPECIFICATIONS:
Frequency Range
Frequency Tolerance / Stability
Operating Temperature Range
Storage Temperature
Aging
Shunt Capacitance
Load Capacitance
Equivalent Series Resistance
Mode of Operation
Drive Level
Insulation Resistance
Shock
Solderability
Solvent Resistance
Vibration
Gross Leak Test
Fine Leak Test
10.000MHZ to 50.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-40°C to +85°C
±3ppm per year max
7pF Max
(See Part Number Guide for Options)
See ESR Chart
Fundamental
100µW Typical
500 Megaohms Min at 100VDC
MIL-STD-883, Meth 2002, Cond B
MIL-STD-883, Meth 2003
MIL-STD-202, Meth 215
MIL-STD-883, Meth 2007, Cond A
MIL-STD-883, Meth 1014, Cond C
MIL-STD-883, Meth 1014, Cond A
Frequency Range
10.000MHz to 12.000MHz
12.000MHz to 16.000MHz
16.000MHz to 30.000MHz
30.000MHz to 50.000MHz
ESR (Ohms)
70 Max
70 Max
60 Max
40 Max
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
MARKING:
Line 1: MXX.XXX
XX.XXX = Frequency in MHz
Line 2: SYMCCL
S = Internal Code
YM = Date Code (Year/Month)
CC = Crystal Parameters Code
L = Denotes RoHS Compliant
MECHANICALS DETAIL:
5.20 [.205]
MAX
1.20 [.047]
MAX
2.60 [.102]
3.40 [.134]
MAX
3.40 [.134]
3
4
2
1
2.20 [.087]
1.40 [.055]
0.90 [.035]
1.20 [.047]
1.20 [.047]
PIN CONNECTIONS
PIN 1
CRYSTAL
PIN 2 NO CONNECTION
PIN 3
CRYSTAL
PIN 4 NO CONNECTION
2.00 [.079]
RECOMMENDED
LAND PATTERN
DIMENSION IN BRACKETS ARE IN INCHES
PART NUMBER GUIDE:
J
Frequency
1
5mm X 3.2mm x 1.2mm
4 Pads
Mode of Operation
1 = Fundamental
Temperature
Tolerance/Stability*
Load Capacitance
S = Series
16 = 16pF (Standard)
XX = XXpF (8pF to 50pF)
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ±50 ppm
C = ±15 ppm / ±30 ppm**
E = ±50 ppm / ±50 ppm
F = ±30 ppm / ±30 ppm
Operating Temperature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C **
Value Added Options
Blank = No Added Options
T = Tape and Reel
* Please consult with MMD sales department for any other parameters or options.
** Not all Frequency Tolerance/Stability options available at this temperature range.
*** Not available in the 20MHZ - 40MHZ range.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision 01/30/07 D
Similar pages