6A05 - 6A10 6.0A SILICON RECTIFIER Features · · High Surge Current Capability Low Leakage and Forward Voltage Drop A A B Mechanical Data · · · · · C D Case: R-6, Molded Plastic Terminals: Axial Leads, Solderable per MIL-STD-202, Method 208 Polarity: Color Band Indicates Cathode Approx. Weight: 2.1 grams Plastic Material - UL Flammability Classification 94V-0 R-6 Dim Min Max A 25.40 — B 8.60 9.10 C 1.20 1.30 D 8.60 9.10 All Dimensions in mm Maximum Ratings and Electrical Characteristics @25°C unless otherwise specified Ratings at 25°C ambient temperature unless otherwise specified. Single phase, halfwave, 60Hz, resistive or inductive load. Symbol 6A05 6A1 Maximum Recurrent Peak Reverse Voltage Characteristic VRRM 50 100 200 400 Maximum RMS Voltage VRMS 35 70 140 280 Maximum DC Blocking Voltage VDC 50 100 200 400 600 Maximum Average Forward Rectified Current 9.5mm lead length @ TA = 75°C (See Fig. 1) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I(AV) 6.0 A IFSM 400 A VF 0.90 V IR 10 100 µA TJ, TSTG -65 to +175 °C Maximum Instantaneous Forward Current at 6.0A DC Maximum DC Reverse Current at Rated Blocking Voltage @ TA = 25°C @ TA = 100°C Operating and Storage Temperature Range DS28009 Rev. F-2 1 of 2 6A2 6A4 6A6 6A8 6A10 Unit 600 800 1000 V 420 560 700 V 800 1000 V 6A05 - 6A10 AVERAGE RECTIFIED CURRENT (A) 6 5 A 4 B 3 Standard Method (See Derating "B") Recommended Method (See Derating "A") 2 2 Ground Plane: 25mm equivalent copper surface area 1 0 20 40 60 80 100 120 140 160 180 Printed Circuit Board Mounting Method TA, AMBIENT TEMPERATURE (ºC) 40 500 PEAK FORWARD SURGE CURRENT (A) INSTANTANEOUS FORWARD CURRENT (A) Output Current Derating Curve TJ = 25ºC 10 1.0 Pulse Width = 300 ms 2% Duty Cycle 0.1 0.6 0.8 1.0 1.2 400 300 200 100 0 1.6 1.4 8.3ms Single Half Sine-Wave JEDEC Method 1 10 100 INSTANTANEOUS FORWARD VOLTAGE (V) NUMBER OF CYCLES AT 60 Hz Typical Forward Characteristics Maximum Non-Repetitive Peak Forward Surge Current THERMAL RESISTANCE JUNCTION TO AMBIENT RqJA - ºC/WATT 25 20 15 10 5 0 0 5 10 15 20 25 LEAD LENGTH TO HEAT SINK (mm) Typical Thermal Resistance (Using Standard Mounting Method "B") DS28009 Rev. F-2 2 of 2 6A05 - 6A10