ON MURH860CT Megahertz power rectifier Datasheet

MURH860CT
Preferred Device
MEGAHERTZt
Power Rectifier
These state-of-the-art are MEGAHERTZ power rectifiers are
designed for use in switching power supplies, inverters and as free
wheeling diodes.
http://onsemi.com
Features
•
•
•
•
•
•
•
•
•
Ultrafast 35 Nanosecond Recovery Times
175°C Operating Junction Temperature
Popular TO-220 Package
Epoxy Meets UL 94 V−0 @ 0.125 in
High Temperature Glass Passivated Junction
High Voltage Capability to 600 V
Low Leakage Specified @ 150°C Case Temperature
Current Derating @ Both Case and Ambient Temperatures
Pb−Free Package is Available*
ULTRAFAST RECTIFIER
8.0 AMPERES, 600 VOLTS
1
2, 4
3
4
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.9 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
1
TO−220AB
CASE 221A
PLASTIC
2
3
MARKING DIAGRAM
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
600
V
Average Rectified Forward Current
(Rated VR, TC = 120°C) Total Device
IF(AV)
4.0
8.0
A
Peak Repetitive Forward Current (Rated
VR, Square Wave, 20 kHz, TC = 120°C)
IFM
16
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
IFSM
100
A
TJ, Tstg
−65 to +175
°C
Rating
Symbol
Value
Unit
Max. Thermal Resistance, Junction−to−Case
RqJC
3.0
°C/W
Operating Junction and Storage
Temperature Range
THERMAL CHARACTERISTICS (Per Leg)
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2008
June, 2008 − Rev. 4
1
AY WW
UH860G
AKA
A
Y
WW
UH860
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
Device
MURH860CT
MURH860CTG
Package
Shipping
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MURH860CT/D
MURH860CT
ELECTRICAL CHARACTERISTICS (Per Leg)
Symbol
Rating
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 4.0 A, TC = 150°C)
(iF = 4.0 A, TC = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TC = 150°C)
(Rated DC Voltage, TC = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/ms)
trr
Value
Unit
V
2.5
2.8
mA
500
10
35
ns
100
50
20
TJ = 150°C
10
7
5
3
2
I R , REVERSE LEAKAGE CURRENT ( μA)
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%
85°C
25°C
1
0.7
0.5
0.3
0.2
0.1
0
0.5
1
1.5
2
2.5
3
3.5
4
v F , INSTANTANEOUS VOLTAGE (VOLTS)
4.5
5
5
0.2
0.1
0.05
0.02
0.01
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
36
TJ = 150°C
28
24
SQUARE
WAVE
16
DC
12
8
4
0
1
2
3
4
5
6
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
25°C
0.5
0
50 100
200
300
400
500
VR, REVERSE VOLTAGE (VOLTS)
600
Figure 2. Typical Reverse Leakage Current, Per Leg
40
20
100°C
2
1
Figure 1. Typical Forward Voltage, Per Leg
32
150°C
50
20
10
7
10
RATED VOLTAGE APPLIED
RqJC = 3°C/W
9
8
7
6
5
SQUARE
DC
4
3
2
1
0
40
60
80
100
120
140
TC, CASE TEMPERATURE (°C)
160
180
Figure 4. Typical Current Derating, Case, Per Leg
Figure 3. Typical Forward Dissipation, Per Leg
http://onsemi.com
2
MURH860CT
32
28
28
Trr
24
24
20
20
Qrr
16
16
12
12
Vr = 30 V
di/dt = 50 A/ms
8
8
4
0
4
0
1
2
3
4
5
6
7
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
8
C, CAPACITANCE (pF)
Figure 5. Typical Recovery Characteristics
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
0.1
1
10
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Capacitance, Per Leg
http://onsemi.com
3
100
0
Qrr , RECOVERED STORED CHARGE (nC)
Trr, REVERSE RECOVERY TIME (ns)
32
MURH860CT
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AF
−T−
B
F
SEATING
PLANE
C
T
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
U
1 2 3
H
K
Z
L
R
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
G
D
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.161
0.095
0.105
0.110
0.155
0.014
0.025
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
----0.080
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
4.09
2.42
2.66
2.80
3.93
0.36
0.64
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
----2.04
MEGAHERTZ is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MURH860CT/D
Similar pages