Effciency Fast Rectifiers Formosa MS EF5A05F THRU EF5A60F List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Tube packing.................................................................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-222504 2008/02/10 2015/07/06 Revision C Page. 6 Effciency Fast Rectifiers Formosa MS EF5A05F THRU EF5A60F 5.0A Glass Passivated Effciency Fast Rectifiers-50-600V Package outline Features ITO-220AC • Reverse recovery time less than 25ns • High current capability. • Low reverse leakage current . • High surge capability. • Glass passivated chip junction. • Low forward drop down voltage. • High reliability. • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen free parts, ex. ΕF5A05F-H. 0.406(10.3) 0.381(9.7) 0.189(4.8) 0.165(4.2) 0.130(3.3) 0.099(2.5) 0.272(6.9) 0.248(6.3) 0.606(15.4) 0.583(14.8) 0.134(3.4) 0.118(3.0) 1 2 0.161(4.1)MAX Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : JEDEC ITO-220AC molded plastic body over 0.548(13.9) 0.512(13.0) 0.035(0.9) 0.011(0.3) passivated chip • Lead : Axial leads, solderable per MIL-STD-202, 0.110(2.8) 0.091(2.3) 0.032(0.8)MAX Method 208 guranteed PIN1 • Polarity: As marked • Mounting Position : Any • Weight : Approximated 1.70 gram Maximum ratings (AT PIN2 Dimensions in inches and (millimeters) o T A=25 C unless otherwise noted) SYMBOLS EF5A05F EF5A10F EF5A20F EF5A40F EF5A60F UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC blocking voltage VDC 50 100 200 400 600 V PARAMETER Maximum average forward rectified current IO 5.0 A Peak forward surge current 8.3ms single half sine-wave(JEDEC method) IFSM 80 A Typical diode junction capacitance (Note 1) CJ 30 pF Operating junction temperature range TJ -55 to +150 °C Storage temperature range TSTG -65 to +175 °C Electrical characteristics (AT SYMBOLS PARAMETER Maximum forward voltage at IF=5.0A Maximum DC reverse current at rated DC blocking voltage o T A=25 C unless otherwise noted) EF5A05F VF at TJ =25 ° C at TJ =125 ° C Maximum reverse recovery time (Note 2) EF5A10F EF5A20F 0.98 EF5A40F EF5A60F UNIT 1.30 1.75 V IR 5.0 200 uA uA trr 25 ns Thermal characteristics PARAMETER Typical thermal resistance junction to case SYMBOLS EF5A05F RθJC EF5A10F EF5A20F EF5A40F EF5A60F UNIT °C/W 3.0 Note 1: Measure at 1 MHz and applied reverse voltage of 4.0 V D.C. Note 2: Reverse recovery time test condition, IF=0.5A, IR=1.0A, IRR=0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 2 Document ID Issued Date Revised Date DS-222504 2008/02/10 2015/07/06 Revision C Page. 6 Rating and characteristic curves (EF5A05F THRU EF5A60F) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) FIG.3-TYPICAL FORWARD CHARACTERISTICS 6.0 INSTANTANEOUS FORWARD CURRENT,(A) 40 5.0 4.0 3.0 2.0 1.0 0 0 20 40 60 80 100 120 140 160 180 200 CASE TEMPERATURE,TC( C) FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 600V 1 T J = 25 °C .1 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) 100 PEAK FORWARD SURGE CURRENT,(A) 400V 50~200V 8.3ms Single Half 80 Sine Wave JEDEC method 60 40 20 FIG.4 - TYPICAL REVERSE 0 CHARACTERISTICS 1 5 50 10 100 1000 REVERSE LEAKAGE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz FIG.5- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS trr 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) 0 PULSE GENERATOR -0.25A (NOTE 2) (+) 25Vdc (approx.) D.U.T. ( ) 1W NONINDUCTIVE | | | | | | | | +0.5A 2. Rise Time= 10ns max., Source Impedance= 50 ohms. TJ=125°C 10 TJ=25°C 1 0.1 (+) OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date DS-222504 2008/02/10 2015/07/06 Revision C Page. 6 Effciency Fast Rectifiers Formosa MS EF5A05F THRU EF5A60F Pinning information Pin Pin1 Pin2 Simplified outline Symbol PIN1 cathode anode PIN2 1 2 Marking Type number Marking code EF5A05F EF5A10F EF5A20F EF5A40F EF5A60F EF5A05F EF5A10F EF5A20F EF5A40F EF5A60F Tube packing PACKAGE TUBE (pcs) ITO-220AC 50 TUBE SIZE (m/m) 525*32*7.0 BOX (pcs) INNER BOX (m/m) 1000 555*150*40 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 CARTON SIZE (m/m) 580*230*175 Page 4 CARTON (pcs) 5,000 APPROX. GROSS WEIGHT (kg) 15.0 Document ID Issued Date Revised Date DS-222504 2008/02/10 2015/07/06 Revision C Page. 6 Effciency Fast Rectifiers Formosa MS EF5A05F THRU EF5A60F Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-222504 2008/02/10 2015/07/06 Revision C Page. 6 Effciency Fast Rectifiers Formosa MS EF5A05F THRU EF5A60F High reliability test capabilities Item Test Conditions Reference O MIL-STD-750D METHOD-2031 O MIL-STD-202F METHOD-208 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16" ± 1/32" 2. Solderability at 245 ± 5 C for 5 sec. 3. High Temperature Reverse Bias V R=80% rate at T J=150 C for 168 hrs. 4. Forward Operation Life Rated average rectifier current at T A=25 C for 500hrs. MIL-STD-750D METHOD-1038 O MIL-STD-750D METHOD-1027 O O 5. Intermittent Operation Life 6. Pressure Cooker T A = 25 C, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 O 15P SIG at T A=121 C for 4 hrs. O MIL-STD-750D METHOD-1051 O 7. Temperature Cycling -55 C to +125 C dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Forward Surge 8.3ms single half sine-wave , one surge. 9. Humidity at T A=85 C , RH=85% for 1000hrs. 10. High Temperature Storage Life at 175 C for 1000 hrs. MIL-STD-750D METHOD-4066-2 MIL-STD-750D METHOD-1021 O http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 MIL-STD-750D METHOD-1031 O Page 6 Document ID Issued Date Revised Date DS-222504 2008/02/10 2015/07/06 Revision C Page. 6