XC74WL74AASR ETR1318_001 CMOS Logic ■GENERAL DESCRIPTION XC74WL74AASR is d-type flip flop manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, gives way to high speed operations which enables LS-TTL. With wave forming buffers connected internally, stabilized output can be achieved as the series offers high noise immunity. As the series is integrated into a mini molded, MSOP-8B package, high density mounting is possible. ■APPLICATIONS ■FEATURES ●Palmtops High Speed Operations : fmax = 170MHz (TYP.) (VCC=5V) Operating Voltage Range : 2V ~ 5.5V ●Digital equipment Low Power Consumption : 1μA (MAX.)@Ta=25℃ CMOS Logic D-Type Flip Flop Small Package : MSOP-8B ■PIN CONFIGURATION ■FUNCTIONS PR INPUT CLR CK L H L H H H H L L H H H X X X D X X X H L X OUTPUT ＿ Q Q H L L H H H H L L H Q0 Q0 H=High level L=Low level X=Don’t care 1/5 XC74WL74AASR ■ABSOLUTE MAXIMUM RATINGS Ta=-40℃~85℃ PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage VCC -0.5~+6.0 V Input Voltage VIN -0.5~+6.0 V Output Voltage VOUT -0.5~VCC+0.5 V Input Diode Current IIK -20 mA Output Diode Current IOK ±20 mA Switch Output Current IOUT ±25 mA VCC,GND Current ICC,IGND ±50 mA Power Dissipation (Ta = 25℃) Pd 300 mW Storage Temperature Range Tstg -65~+150 ℃ Note; Voltage is all ground standardized. ■RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage VCC 2~5.5 V Input Voltage VIN 0~5.5 V Output Voltage VOUT 0~ VCC V Operating Temperature Range Topr -40~+85 ℃ Input Rise and Fall Time tr, tf 0～200（VCC=3.3V） ns 0～100（VCC=5V） ■DC ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL VIH Input Voltage VIL CONDITIONS VCC(V) MAX. MIN. MAX. 2.0 1.5 － － 1.5 － 3.0 2.1 － － 2.1 － 5.5 3.85 － － 3.85 － 2.0 － － 0.5 － 0.5 3.0 － － 0.9 － 0.9 5.5 － － 1.65 － 1.65 1.9 2.0 － 1.9 － 2.9 3.0 － 2.9 － 4.4 4.5 － 4.4 － － － 2.48 － IOH=-50μA 3.0 Output Voltage 4.5 VIN=VIL 3.0 IOH=-4mA 2.58 4.5 IOH=-8mA 3.94 － － 3.80 － － － 0.1 － 0.1 － － 0.1 － 0.1 － － 0.1 － 0.1 2.0 IOL=50μA 3.0 VOL 2/5 Ta=-40℃~85℃ TYP. 2.0 VOH Ta=25℃ MIN. 4.5 VIN=VIL or VIH UNITS V V V V 3.0 IOL=4mA － － 0.36 － 0.44 4.5 IOL=8mA － － 0.36 － 0.44 -0.1 － 0.1 -1.0 1.0 μA － － 1.0 － 10.0 μA Input Current IIN 0～5.5 Static Supply Current ICC 5.5 VIN=VCC or GND VIN=VCC or GND,IOUT=0μA XC74WL74AASR ■SWITCHING ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CL 15pF tPLH 50pF Delay Time (CK-Q Q) 15pF tPHL 50pF 15pF tPLH 50pF Delay Time (PR, CLR-Q, Q) 15pF tPHL 50pF VCC(V) CONDITIONS (tr=tf=3ns) Ta=25℃ Ta=-40℃~85℃ MIN. TYP. MAX. MIN. MAX. 3.3 － 6.7 11.9 1.0 14.0 5.0 － 4.6 7.3 1.0 8.5 3.3 － 9.2 15.4 1.0 17.5 5.0 － 6.1 9.3 1.0 10.5 3.3 － 6.7 11.9 1.0 14.0 5.0 － 4.6 7.3 1.0 8.5 3.3 － 9.2 15.4 1.0 17.5 5.0 － 6.1 9.3 1.0 10.5 3.3 － 7.6 12.3 1.0 14.5 5.0 － 4.8 7.7 1.0 9.0 3.3 － 10.1 15.8 1.0 18.0 5.0 － 6.3 9.7 1.0 11.0 3.3 － 7.6 12.3 1.0 14.5 5.0 － 4.8 7.7 1.0 9.0 3.3 － 10.1 15.8 1.0 18.0 5.0 － 6.3 9.7 1.0 11.0 UNITS ns ns ns ns ns ns ns ns ts(L) － 3.3 6.0 － － 7.0 － ts(H) － 5.0 5.0 － － 5.0 － th(L) － 3.3 2.0 － － 2.0 － th(H) － 5.0 2.0 － － 2.0 － Minimum Pulse Width tw(L) － 3.3 7.0 － － 7.0 － (CK) tw(H) － 5.0 5.0 － － 5.0 － － 3.3 7.0 － － 7.0 － － 5.0 5.0 － － 5.0 － － 3.3 5.0 － － 5.0 － － 5.0 3.0 － － 3.0 － 3.3 80 125 － 70 － 5.0 130 170 － 110 － 3.3 50 75 － 45 － 5.0 90 115 － 75 － － 4 10 － 10 pF － 9.3 － － － pF Minimum Set Up Time Minimum Hold Time Minimum Pulse Width (PR, CLR) Minimum Removal Time (PR, CLR) Maximum Clock Frequency Input Capacitance Power Dissipation Capacitance Tw trem 15pF fmax 50pF CIN Cpd － 5.0 VIN=VCC or GND No Load, f=1MHz ■NOISE CHARACTERISTICS PARAMETER SYMBOL Non Functional Output Maximum Dynamic VOL ns ns ns ns ns MHz MHz (tr=tf=3ns) CONDITIONS Ta=25℃ UNITS CL VCC(V) MIN. TYP. MAX. VOLP 50pF 5.0 － 0.3 0.8 V Non Functional Output Minimum Dynamic VOL VOLV 50pF 5.0 -0.8 -0.3 － V Minimum Dynamic VIH VIHD 50pF 5.0 － － 3.5 V Maximum Dynamic VIL VILD 50pF 5.0 － － 1.5 V 3/5 XC74WL74AASR ■TEST CIRCUIT ■WAVEFORM 4/5 XC74WL74AASR 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd. 5/5