OM100Q05CB/RB/DB OM100Q15CB/RB/DB OM100Q30CB/RB/DB OM100Q50CB/RB/DB OM100Q70CB/RB/DB OM100Q10CB/RB/DB OM100Q20CB/RB/DB OM100Q40CB/RB/DB OM100Q60CB/RB/DB OM100Q80CB/RB/DB 100 AMP ULTRA FAST CENTER-TAP IN HERMETIC ISOLATED POWER BLOCK PACKAGE 100 Amp, 50 To 800 Volt High Power Rectifier Module FEATURES • • • • • • • • • Rugged Package Design Very Low Forward Voltage Very Fast Switching Time High Current Center-Tap Configuration Low Thermal Resistance Common Cathode Standard Ceramic Feedthroughs Available Available Screened To MIL-S-19500, TX, TXV And S Levels DESCRIPTION This series of products in a hermetic package is specifically designed for use at power switching frequencies in excess of 100 kHz. The series combines the latest silicon technology and a package specifically designed for high efficiency/high current applications. These devices are ideally suited for applications where small size and a hermetically sealed package are required. ABSOLUTE MAXIMUM RATINGS (Per Diode) @ 25°C Peak Inverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 to 800 V Maximum Average D.C. Output Current @ TC = 100° C . . . . . . . . . . . . . . . . . . . . . . 50 A Surge Current (Non-Repetitive 8.3 ms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 A Thermal Resistance, Junction-to-Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0°C/W Operating and Storage Temperature Range . . . . . . . . . . . . . . . . . . . . - 55° C to + 150°C SCHEMATIC PIN CONNECTION 1 2 1 2 3 COMMON ANODE 3 COMMON CATHODE OMXXXXXXRB OMXXXXXXCB 3 1 DOUBLER 2 1 OMXXXXXXDB Common cathode is standard. Contact factory for performance characteristics for common anode and doubler. 4 11 R0 3.2 - 1 2 3 3.2 OM100Q05CB/RB/DB - OM100Q80CB/RB/DB ELECTRICAL CHARACTERISTICS (Per Diode) Part Number PIV OM100Q05XX 50 V Maximum Forward Voltage IF = 50 A (1) Tj = 25° C Tj = 100° C OM100Q10XX 100 V .97 V .85 V 1.20 V 1.00 V 1.30 V 1.05 V OM100Q15XX 150 V Maximum Reverse Current @ PIV Tj = 25° C Tj = 100° C Maximum Reverse Recovery Time (2) 50 ns OM100Q20XX 200 V OM100Q30XX 300 V OM100Q40XX 400 V 25 µA 3.0 mA 75 ns OM100Q50XX 500 V OM100Q60XX 600 V OM100Q70XX 700 V 100 ns OM100Q80XX 800 V Notes: (1) Pulse Test: Pulse Width = 300µs, Duty Cycle 2.0%. (2) Measured in Circuit: IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A Typical Forward Voltage 50V - 200V 300V - 500V TJ = 100°C TJ = 25°C 10 .4 3.2 .6 .8 1.0 VF - Instantaneous Voltage (Volts) 100 IF - Instantaneous Forward Current (Amps) 100 IF - Instantaneous Forward Current (Amps) IF - Instantaneous Forward Current (Amps) 100 600V - 800V TJ = 100°C TJ = 25°C 10 .6 .8 1.0 TJ = 100°C TJ = 25°C 10 1.2 .7 VF - Instantaneous Voltage (Volts) Typical Reverse Current .9 1.1 Mechanical Outline 2.000 1.500 IR - Reverse Current (mA) 10 1.0 .563 .1 .125 .472 TJ = 175°C .01 .001 TERMINAL 1 TJ = 75°C E 50 % VR - Reverse Voltage (Volts) .050 G .125 DIA. 4 PLCS. .375 .875 1.375 1.750 .166 DIA. 3 PLCS. TJ = 25°C 0 .515 MAX. .250 2 PLCS. .813 C .324 TJ = 125°C .0001 1.3 VF - Instantaneous Voltage (Volts) 100 .100 DIA. 3 PLCS. .225 205 Crawford Street, Leominster, MA 01453 USA (508) 534-5776 FAX (508) 537-4246 ±.010 .510 ±.010 .275 .030 ±.010 .375