10Base-T Interface Module with Common Mode Choke ELECTRONICS INC. EPE6062S & EPE6062S-RC • Complies with or exceed IEEE802.3, 10Base- T Standards • Add “-RC” after part number for RoHS Compliant • Packaged in Tubes or Tape and Reel • 2000 Vrms Isolation Electrical Parameters @ 25° C Primary OCL (uH Min.) Leakage Inductance (µH Max.) Interwinding Capacitance (pF Max.) @100 KHz, 20m Vrms @100 KHz, 20m Vrms @100 KHz, 20m Vrms DCR (Ω Max.) 200 0.30 20 0.90 Pins 1-3 & Pins 6-8 Pins 1-3 & Pins 6-8 Pri. to Sec Pins 1-3 & Pins 6-8 Package Schematic Pri. 1 .450 (11.43) Pin 1 I.D. .090 (2.29) .050 (1.27) .050 (1.27) PCA EPE6062S(-RC) .250 (6.35) Date Code .420 (10.67) RCV Solder Pad Layout .350 (8.89) .025 (.635) 3 14 1CT:1.4CT 11 7 10 8 9 .008/.012 (.203/.305) 0°-8° .016/.022 (.406/.559) 15 Pins # 4, 5, 12, 13 N/C .005/.015 (.127/.381) .225 (5.71) 2 6 XMIT Sec. 16 1CT:1CT .040 (1.02) .375 (9.53) .050 (1.27) Notes : EPE6062S 1. Assembly Process (Solder Composition) SnPb EPE6062S-RC Pb-Free + (RoHS exemption 7a) 2. Peak Solder Rating (per IPC/JEDEC J-STD-020C) 3. Moisture Sensitive Levels (MSL) 260°C MSL = 4 (168 Hours, ≤30°C/60%RH) (per IPC/JEDEC J-STD-020C) 4. Weight 5. Packaging Information (*Add “TR” to end of part number when placing order) 225°C MSL = 3 (Tube) (Tape & Reel) (72 Hours, ≤30°C/60%RH) 0.84 grams 0.84 grams 39 pieces/tube 600 pieces/13” reel 39 pieces/tube 600 pieces/13” reel (*EPE6062S-TR) (*EPE6062S-RCTR) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6062S & -RC Rev. 1 11/17/05 JGD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com