SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range –40°C to +85°C Moisture sensitivity level (MSL) 2 Isolation Voltage 1500 VDC High Accuracy of Pin Planarity Lead free, RoHs Compliant 3 Years Product Warranty The SH01S/D series is miniature, SMD Package, isolated 1W DC/DC converters with 1,500VDC isolation. It allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, In Model List Model Number SH01S0503A SH01S0505A SH01S0509A SH01S0512A SH01S0515A SH01D0505A SH01D0512A SH01D0515A SH01S1203A SH01S1205A SH01S1209A SH01S1212A SH01S1215A SH01D1205A SH01D1212A SH01D1215A SH01S1512A SH01S1515A SH01S2403A SH01S2405A SH01S2409A SH01S2412A SH01S2415A SH01D2405A SH01D2412A SH01D2415A Input Voltage (Range) Output Voltage VDC VDC 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 12 15 3.3 5 9 12 15 ±5 ±12 ±15 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 15 (13.5 ~ 16.5) 24 (21.6 ~ 26.4) DS_SH01S/D_02182013 Output Current Input Current Load Max. capacitive Regulation Load Max. Min. @Max. Load @No Load mA 300 200 110 84 67 ±100 ±42 ±33 300 200 110 84 67 ±100 ±42 ±33 84 67 300 200 110 84 67 ±100 ±42 ±33 mA 6 4 2 1.5 1 ±2 ±0.8 ±0.7 6 4 2 1.5 1 ±2 ±0.8 ±0.7 1.5 1 6 4 2 1.5 1 ±2 ±0.8 ±0.7 mA(typ.) 271 256 254 259 254 270 259 254 112 109 106 106 105 113 108 104 86 86 58 54 54 55 53 57 54 53 mA(typ.) 30 15 14 8 9 Efficiency (typ.) @Max. Load % (max.) 10 10 10 8 7 10 8 7 8 8 8 5 5 8 5 5 5 5 8 8 8 5 5 8 5 5 uF 33 33* 33 33* 33 33 33* % 73 78 78 78 79 74 78 78 74 76 78 79 80 74 78 79 78 78 72 78 77 77 79 73 78 78 * For each output E-mail: [email protected] http:// www.deltaww.com/dcdc P1 Input Characteristics Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 15V Input Models 13.5 15 16.5 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 15V Input Models -0.7 --- 20 24V Input Models -0.7 --- 30 --- --- 0.3 Reverse Polarity Input Current All Models Input Filter Internal Power Dissipation Unit VDC A Internal Capacitor --- --- 450 mW Output Characteristics Parameter Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Conditions Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% Over Line, Load & Temp. Min. ------------- Typ. Max. ±0.1 ±1.0 ±1.2 ±1.5 See Model Selection Guide 60 120 --150 --15 ±0.01 ±0.02 0.5 Second Max. Unit % % mV P-P mV P-P mV rms %/℃ General Characteristics Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Conditions Min. Typ. Max. Unit 60 Seconds 1500 --- --- VDC 500 VDC 1000 --- --- MΩ 100KHz, 1V Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Moisture Sensitivity Level (MSL) --- 40 100 pF 50 100 140 KHz 2,000,000 --- --- Hours IPC/JEDEC J-STD-020D Level 2 Recommended Input Fuse 5V Input Models 500mA Slow-Blow Type 12V Input Models 200mA Slow-Blow Type 15V Input Models 150mA Slow-Blow Type 24V Input Models 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_SH01S/D_02182013 Conditions Ambient Min. Max. -40 +85 --+90 -50 +125 --95 Free-Air convection --260 Unit ℃ ℃ ℃ % rel. H ℃ E-mail: [email protected] http:// www.deltaww.com/dcdc P2 +20% +20% +20% +20% +15% +15% +15% +15% +10% +10% +10% Max. +5% +5% Typ. Vnom Vnom Min. -5% -5% -10% 0% 20% 40% 60% 80% Output Load Current (%) (3.3V & 5V Output) -10% 100% Output Voltage(%) Output Voltage(%) Output Voltage Tolerance +10% Max. +5% +5% Typ. Vnom Vnom Min. -5% -5% -10% 0% 20% 40% 60% 80% -10% 100% Output Load Current (%) (All other Output) Output Power (%) Power Derating Curve Notes 1 2 3 4 5 6 7 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications subject to change without notice. It is not recommended to use water-washing process on SMT units. DS_SH01S/D_02182013 E-mail: [email protected] http:// www.deltaww.com/dcdc P3 Mechancial Drawing Mechanical Dimensions (Single Output) Connecting Pin Patterns 2.54 [0.1] 5.08 [0.2] 13.7 [0.54] 1.7 [0.07] 10.6 [0.42] 0~ 4 4 R 0. 5 2 11.0 0.2 [0.43 0.008] 1 5 8.0 [0.31] 8 7.62 [0.30] 0.25 [0.01] 3.04 [0.12] ( Magnification of A ) 0.60 [0.02] 7.0 0.5 [0.28 0.02] 1.5 0.1 [0.06 0.004] 5.5 [0.22] 5.5 [0.22] 1.5 0.1 [0.06 0.004] 0.15 S Mechanical Dimensions (Dual Output) Connecting Pin Patterns 2.54 [0.1] 5.08 [0.2] 16.24 [0.64] 0.25 [0.01] 1.7 [0.07] 10.6 [0.42] 2.54 [0.1] 0~ 4 R 0. 5 7.62 [0.30] 5 4 2 11.0 0.2 [0.43 0.008] 1 7 8.0 [0.31] 3.04 [0.12] 10 1.0 [0.04] S SEATING PLANE 0.3 [0.01] 6.7 [0.26] 2.54 [0.10] ( Magnification of A ) 0.60 [0.02] 7.0 0.5 [0.28 0.02] 0.3 [0.01] 6.7 [0.26] 2.54 [0.10] 1.0 [0.04] S SEATING PLANE 1.5 0.1 [0.06 0.004] 5.5 [0.22] 5.5 [0.22] 1.5 0.1 [0.06 0.004] 0.15 S ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pins ±0.05 (±0.002) Pin Connections Pin Physical Outline Single Output Dual Output 1 -Vin -Vin 2 +Vin +Vin 3 No Pin No Pin 4 -Vout Common 5 +Vout -Vout 6 No Pin No Pin 7 No Pin +Vout 8 NA No Pin 9 --- No Pin 10 --- NA Case Size (Single Output) : 13.7x8.0x6.7mm (0.54x0.31x0.26 Inches) Case Size (Dual Output) : 16.24x8.0x6.7mm (0.64x0.31x0.26 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight (Single Output) : 1.7g Weight (Dual Output) : 2.0g NA : Not Available for Electrical Connection DS_SH01S/D_02182013 E-mail: [email protected] http:// www.deltaww.com/dcdc P4 Part Numbering System S H 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_SH01S/D_02182013 E-mail: [email protected] http:// www.deltaww.com/dcdc P5