Series AM1D-NZ 1 Watt | DC-DC Converter FEATURES: • • • • Models Single output Model AM1D-0505S-NZ AM1D-0509S-NZ AM1D-0512S-NZ AM1D-0515S-NZ AM1D-1205S-NZ AM1D-1209S-NZ AM1D-1212S-NZ AM1D-1215S-NZ AM1D-1505S-NZ AM1D-1512S-NZ AM1D-1515S-NZ AM1D-2405S-NZ AM1D-2409S-NZ AM1D-2412S-NZ AM1D-2415S-NZ RoHS compliant High efficiency up to 82% Low profile plastic package 7 pin SIP package Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Output Voltage (V) 5 9 12 15 5 9 12 15 5 12 15 5 9 12 15 • • • o o Operating temperature -40 C to + 85 C 1 sec short circuit protection Pin compatible with multiple manufacturers Output Current max (Ma) Isolation (VDC) Efficiency (%) 200 110 83 70 200 110 83 70 200 83 70 200 110 83 70 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 72 74 77 79 73 75 79 80 72 74 75 74 76 80 81 AM1D-0505SH30-NZ AM1D-0509SH30-NZ AM1D-0512SH30-NZ AM1D-0515SH30-NZ AM1D-1205SH30-NZ AM1D-1209SH30-NZ AM1D-1212SH30-NZ AM1D-1215SH30-NZ AM1D-2405SH30-NZ AM1D-2409SH30-NZ AM1D-2412SH30-NZ AM1D-2415SH30-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 5 9 12 15 5 9 12 15 200 110 83 70 200 110 83 70 200 110 83 70 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 70 75 78 80 72 76 79 81 73 77 80 82 AM1D-0505SH60-NZ AM1D-0509SH60-NZ AM1D-0512SH60-NZ AM1D-0515SH60-NZ AM1D-1205SH60-NZ AM1D-1209SH60-NZ AM1D-1212SH60-NZ AM1D-1215SH60-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 200 110 83 70 200 110 83 70 6000 6000 6000 6000 6000 6000 6000 6000 72 72 75 75 75 76 78 78 Models Dual output Model AM1D-0505D-NZ AM1D-0509D-NZ AM1D-0512D-NZ AM1D-0515D-NZ www.aimtec.com F 051e R6.H Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 Output Voltage (V) ±5 ±9 ±12 ±15 Output Current (mA) ±100 ±55 ±42 ±35 Tel: +1 514 620 2722 1 of 4 Isolation (VDC) 1000 1000 1000 1000 Efficiency (%) 72 75 78 79 Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM1D-NZ Models Dual output (continued) Model AM1D-1205D-NZ AM1D-1209D-NZ AM1D-1212D-NZ AM1D-1215D-NZ AM1D-2405D-NZ AM1D-2409D-NZ AM1D-2412D-NZ AM1D-2415D-NZ 1 Watt | DC-DC Converter Input Voltage (V) 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Output Voltage (V) ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 Output Current (mA) Isolation (VDC) Efficiency (%) ±100 ±55 ±42 ±35 ±100 ±55 ±42 ±35 1000 1000 1000 1000 1000 1000 1000 1000 74 76 79 80 74 76 80 81 AM1D-0505DH30-NZ AM1D-0509DH30-NZ AM1D-0512DH30-NZ AM1D-0515DH30-NZ AM1D-1205DH30-NZ AM1D-1209DH30-NZ AM1D-1212DH30-NZ AM1D-1215DH30-NZ AM1D-2405DH30-NZ AM1D-2409DH30-NZ AM1D-2412DH30-NZ AM1D-2415DH30-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±100 ±55 ±42 ±35 ±100 ±55 ±42 ±35 ±100 ±55 ±42 ±35 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 72 75 78 79 74 76 79 80 74 76 80 81 AM1D-0505DH60-NZ AM1D-0509DH60-NZ AM1D-0512DH60-NZ AM1D-0515DH60-NZ AM1D-1205DH60-NZ AM1D-1209DH60-NZ AM1D-1212DH60-NZ AM1D-1215DH60-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±100 ±55 ±42 ±35 ±100 ±55 ±42 ±35 6000 6000 6000 6000 6000 6000 6000 6000 72 72 75 75 75 76 78 78 Input Specifications Parameters Voltage range Filter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) www.aimtec.com F 051e R6.H Nominal 5 12 15 24 Typical 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Conditions 60 sec Typical > 1000 60 Conditions Typical Maximum VDC Capacitor Rated For 1.0% of Vin For 1.0% of Vin load 10~100% load 10~100% Tel: +1 514 620 2722 2 of 4 Units 1000, 3000 & 6000 VDC MOhm pF Maximum Units ±5 ±1 Momentary (1 sec.) ±1.2 ±1.2 10 10 Dual Output Units % % % % % % Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM1D-NZ 1 Watt | DC-DC Converter Output Specifications (continued) Parameters Conditions Temperature coefficient Ripple & Noise Typical At 20MHz Bandwidth General Specifications Parameters Switching frequency Max Case temperature Operating temperature Storage temperature Derating Cooling Humidity Case material Weight Conditions 100% load Maximum ±0.03 75 Typical Units o %/ C mV p-p Maximum 150 -40 to +85 -55 to +125 Not-Required Free air convection Units KHz o C o C o C +95 90 % Non-conductive black plastic UL 94 V-0 2 g 1000 & 3000VDC 0.76 x 0.24 x 0.39 inch 19.5 x 6.00 x 10.00 mm Dimensions (L x W x H) 6000VDC 0.76 x 0.39 x 0.49 inch 19.50 x 9.80 x 12.5 mm o MTBF >1 100 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Safety Specifications Parameters Standards IEC 60950-1: 2001 cULus (for 1000, 3000 & some 6000VDC Isolated models); CE (for 3000VDC Isolation models and single 1000VDC Isolation models) NOTE: all other models not referenced above are designed to meet standard IEC 60950-1:2001 Agency approvals Pin Out Specifications Pin 1 2 4 5 6 7 1000 VDC Single Dual + V Input - V Input - V Output No pin + V Output No pin + V Input - V Input - V Output Common + V Output No pin 3000 , 6000 VDC Single Dual + V Input - V Input No pin - V Output No pin + V Output External capacitor – Single output Vin (VDC) 5 12 24 - External capacitor (μF) 4.7 2.2 1 - www.aimtec.com F 051e R6.H Vout (VDC) 5 9 12 15 External capacitor (μF) 10 4.7 2.2 1 + V Input - V Input No pin - V Output Common + V Output External capacitor – Dual output Vin (VDC) 5 12 24 - Tel: +1 514 620 2722 3 of 4 External capacitor (μF) 4.7 2.2 1 - Vout (VDC) 5 9 12 15 External capacitor (μF) 10 4.7 2.2 1 Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM1D-NZ 1 Watt | DC-DC Converter Dimensions 1000 and 3000VDC Dimensions 6000VDC 19.50 (0.76) 19.50 (0.76) 6.00 (0.24) 9.80 (0.39) PRINTED FACE PRINTED FACE 9.50 (0.37) 10.00 (0.39) 0.50 (0.02) 0.50 (0.02) 4.10 (0.16) 2.54 (0.10) 12.00 (0.47) 12.50 (0.49) 4.10 (0.16) 2.54 (0.10) 0.50 (0.02) 0.50 (0.02) 9.8 (0.39) 6.00 (0.24) 0.25 (0.01) = 1.25 (0.05) 0.50 (0.02) 1.25 (0.05) 0.50 (0.02) 0.25 (0.01) Tolerance Envelope Graph +10% Typic a +5% l load line +2.5% Output Voltage (%) -2.5% Nominal Voltage -7.5% 10% 50% 100% Output Current (%) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.H Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (926 6832) North America only