IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) • Dynamic dV/dt Rating - 100 RDS(on) (Ω) VGS = - 10 V Qg (Max.) (nC) 18 Qgs (nC) 3.0 Qgd (nC) 9.0 Configuration • Repetitive Avalanche Rated 0.60 RoHS* • Surface Mount (IRFR9120/SiHFR9120) COMPLIANT • Straight Lead (IRFU9120/SiHFU9120) • Available in Tape and Reel • P-Channel Single • Fast Switching S DPAK (TO-252) Available • Lead (Pb)-free Available DESCRIPTION IPAK (TO-251) G Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effictiveness. The DPAK is designed for surface mounting using vapor phase, infrared, or wave soldering techniques. The straight lead version (IRFU/SiHFU series) is for through-hole mounting applications. Power dissipation levels up to 1.5 W are possible in typical surcace mount applications. D P-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free SnPb DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) IRFR9120PbF IRFR9120TRPbFa IRFR9120TRLPbFa SiHFR9120-E3 SiHFR9120T-E3a SiHFR9120TL-E3a IRFR9120 IRFR9120TRa IRFR9120TRLa SiHFU9120-E3 IRFU9120PbF SiHFR9120 SiHFR9120Ta SiHFR9120TLa SiHFU9120 IPAK (TO-251) IRFU9120PbF Note a. See device orientation. ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS - 100 Gate-Source Voltage VGS ± 20 Continuous Drain Current Pulsed Drain VGS at - 10 V TC = 25 °C TC = 100 °C Currenta ID IDM Linear Derating Factor (PCB Mount)e 0.020 Repetitive Avalanche Repetitive Avalanche Energya Maximum Power Dissipation TC = 25 °C Maximum Power Dissipation (PCB Mount)e TA = 25 °C Peak Diode Recovery dV/dtc A - 22 0.33 Currenta V - 5.6 - 3.6 Linear Derating Factor Single Pulse Avalanche Energyb UNIT W/°C EAS 210 mJ IAR - 5.6 A EAR 4.2 mJ PD dV/dt 42 2.5 - 5.5 W V/ns * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 WORK-IN-PROGRESS www.vishay.com 1 IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted PARAMETER Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) SYMBOL LIMIT UNIT TJ, Tstg - 55 to + 150 °C 260d for 10 s Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = - 25 V, starting TJ = 25 °C, L = 10 mH, RG = 25 Ω, IAS = - 5.6 A (see fig. 12). c. ISD ≤ - 6.8 A, dI/dt ≤ 110 A/µs, VDD ≤ VDS, TJ ≤ 150 °C. d. 1.6 mm from case. e. When mounted on 1" square PCB (FR-4 or G-10 material). THERMAL RESISTANCE RATINGS PARAMETER SYMBOL MIN. TYP. MAX. Maximum Junction-to-Ambient RthJA - - 110 Maximum Junction-to-Ambient (PCB Mount)a RthJA - - 50 Maximum Junction-to-Case (Drain) RthJC - - 3.0 UNIT °C/W Note a. When mounted on 1" square PCB (FR-4 or G-10 material). SPECIFICATIONS TJ = 25 °C, unless otherwise noted PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = - 250 µA - 100 - - V ΔVDS/TJ Reference to 25 °C, ID = - 1 mA - - 0.098 - V/°C VGS(th) VDS = VGS, ID = - 250 µA - 2.0 - - 4.0 V nA Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current Drain-Source On-State Resistance Forward Transconductance IGSS IDSS RDS(on) gfs VGS = ± 20 V - - ± 100 VDS = - 100 V, VGS = 0 V - - - 100 VDS = - 80 V, VGS = 0 V, TJ = 125 °C - - - 500 VGS = - 10 V ID = - 3.4 Ab VDS = - 50 V, ID = - 3.4 A µA - - 0.60 Ω 1.5 - - S - 390 - - 170 - - 45 - Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs VGS = 0 V, VDS = - 25 V, f = 1.0 MHz, see fig. 5 VGS = - 10 V ID = - 6.8 A, VDS = - 80 V, see fig. 6 and 13b - - 18 - - 3.0 Gate-Drain Charge Qgd - - 9.0 Turn-On Delay Time td(on) - 9.6 - - 29 - - 21 - - 25 - - 4.5 - - 7.5 - Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance tr td(off) VDD = - 50 V, ID = - 6.8 A, RG = 18 Ω, RD = 7.1 Ω, see fig. 10b tf LD LS Between lead, 6 mm (0.25") from package and center of die contact D pF nC ns nH G S www.vishay.com 2 Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix SPECIFICATIONS TJ = 25 °C, unless otherwise noted PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. - - - 5.6 - - - 22 - - - 6.3 UNIT Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Currenta ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton MOSFET symbol showing the integral reverse p - n junction diode D A G S TJ = 25 °C, IS = - 5.6 A, VGS = 0 Vb TJ = 25 °C, IF = - 6.8 A, dI/dt = 100 A/µsb V - 100 200 ns - 0.33 0.66 µC Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width ≤ 300 µs; duty cycle ≤ 2 %. TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted Fig. 1 - Typical Output Characteristics, TC = 25 °C Fig. 2 - Typical Output Characteristics, TC = 150 °C Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 Fig. 3 - Typical Transfer Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 8 - Maximum Safe Operating Area Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix RD VDS VGS D.U.T. RG +VDD - 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit td(on) tr td(off) tf VGS 10 % 90 % VDS Fig. 9 - Maximum Drain Current vs. Case Temperature Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 www.vishay.com 5 IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix L Vary tp to obtain required IAS IAS VDS VDS D.U.T RG + V DD VDD IAS tp - 10 V 0.01 Ω tp Fig. 12a - Unclamped Inductive Test Circuit VDS Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 kΩ QG - 10 V 12 V 0.2 µF 0.3 µF QGS - QGD D.U.T. VG + VDS VGS - 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig. 13b - Gate Charge Test Circuit Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 IRFR9120, IRFU9120, SiHFR9120, SiHFU9120 Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit D.U.T. + Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - RG + • dV/dt controlled by RG • ISD controlled by duty factor "D" • D.U.T. - device under test + - VDD Compliment N-Channel of D.U.T. for driver Driver gate drive P.W. Period D= P.W. Period VGS = - 10 V* D.U.T. ISD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage VDD Body diode forward drop Inductor current Ripple ≤ 5 % * ISD VGS = - 5 V for logic level and - 3 V drive devices Fig. 14 - For P-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?91280. Document Number: 91280 S-Pending-Rev. A, 17-Jun-08 www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1