Slotted Optical Switch OPB820, OPB821Z, OPB821S Z OPB820 Features: • • • • • Non-contact switching Four standard aperture sizes for high resolution Low profile 0.080” (2.03 mm) wide, 0.250” (8.89 mm) deep slot Choice of PCBoard or wire mountings Product Photo Here OPB821 Description: Each OPB820 and OPB821 device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor mounted in a low-cost black plastic housing on opposite sides of an 0.080” (2.03 mm) wide slot. Each device in this series has a 0.040” (1.02 mm) wide aperture located in front of the infrared diode. Phototransistor switching occurs when an opaque object passes through the slot. Devices are offered with 0.275” (6.96 mm) lead spacing for PCBoard mounting (OPB820) or 24” (610 mm) 26 AWG wire leads (OPB821). Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: • • • • • Non-contact object sensing Assembly line automation Machine automation Equipment safety Machine safety Ordering Information Part Number LED Peak Wavelength Sensor Slot Width / Depth Aperture Emitter/Sensor OPB820 0.04"/ 0.04" OPB820S10 0.04"/ 0.01" OPB820S5 0.04"/ 0.005" Lead Length / Spacing 0.425" / 0.275" OPB820S3 890 nm OPB821Z Transistor 0.080" / 0.255” 0.04"/ 0.003" 0.040"/ 0.040" OPB821S10Z 0.040"/ 0.010" OPB821S5Z 0.040"/ 0.005" OPB821S3Z 0.040"/ 0.003" 24"/26 AWG Wire RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .3 04/07 Page 1 of 7 Slotted Optical Switch OPB820, OPB821Z, OPB821S Z Package Drawing OPB820 Package Drawing OPB821 24 [610] [ MILLIMETERS] DIMENSIONS ARE IN: INCHES Pin # Description Pin # Description Color/Pin # Description Color/Pin # Description 4 Cathode 2 Collector Green-3 Cathode White-2 Collector 3 Anode 1 Emitter Orange-4 Anode Blue-1 Emitter 3 2 4 1 4 2 3 1 CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .3 04/07 Page 2 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Slotted Optical Switch OPB820, OPB821Z, OPB821S Z Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage and Operating Temperature -40°C to +85°C Lead Soldering Temperature (1/16 inch [1.6 mm] from case for 5 seconds with soldering iron) (1) 260°C Input Diode Continuous Forward Current 50 mA Peak Forward Current (1µs pulse width, 300 pps) 3A Reverse Voltage 2V Power Dissipation (2) 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5V Power Dissipation (2) 100 mW Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (2) For OPB820, derate linearly 1.67 mW/° C above 25° C. For OPB821, derate linearly 1.82 mW/° C above 25° C. (3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones. (4) All parameters were tested using pulse technique. Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP245 for additional information) VF Forward Voltage - - 1.7 V IF = 20 mA IR Reverse Current - - 100 µA VR = 2 V Output Phototransistor (See OP555 for additional information) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 1 mA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA Collector-Emitter Dark Current - - 100 nA VCE = 10 V, IF = 0, IE = 0 Collector-Emitter Saturation Voltage OPB820, OPB821 OPB820S3, OPB821S3 OPB820S5, OPB821S5 OPB820S10, OPB821S10 - - 0.4 0.4 0.4 0.4 V V V V IC = 250 µA, IF = 20 mA IC = 40 µA, IF = 20 mA IC = 125 µA, IF = 20 mA IC = 250 µA, IF = 20 mA 500 60 300 400 - - µA µA µA µA VCE = 5 V, IF = 10 mA VCE = 5 V, IF = 10 mA VCE = 5 V, IF = 10 mA VCE = 5 V, IF = 10 mA ICEO Coupled VCE(SAT) IC(ON) On-State Collector Current OPB820, OPB821 OPB820S3, OPB821S3 OPB820S5, OPB821S5 OPB820S10, OPB821S10 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .3 04/07 Page 3 of 7 Slotted Optical Switch OPB820, OPB821Z, OPB821S Z OPB820 - Flag Next to Emitter OPB820 - Flag next to Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 Normalized I C(ON) Response Normalized I C(ON) Response 1.00 0.80 Left to Right Right to Left 0.60 0.40 0.60 Left to Right Right to Left 0.40 0.20 0.20 0.00 0.00 0.80 0.05 0.10 0.15 0.20 0.25 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB820 - Flag in Middle of Slot 1.20 Top to Normalized I C(ON) Response 1.00 0 Top to Bottom 0.80 Left to Right Right to Left Emitter 0.60 Left to Right Right to Left 0.40 Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .3 04/07 Page 4 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Slotted Optical Switch OPB820, OPB821Z, OPB821S Z OPB820S3 - Flat Next to Sensor OPB820S3 - Flag Next to Emitter 1.20 1.20 Top to Bottom Top to Bottom 1.00 Typical I C(ON) Response (mA) Typical I C(ON) Response (mA) 1.00 0.80 Left to Right Right to Left 0.60 0.40 0.20 0.00 0.00 0.80 Left to Right Right to Left 0.60 0.40 0.20 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPB820S3 - Flag in Middle of Slot 1.20 Top to Bottom 1.00 Typical I C(ON) Response (mA) 0 Top to Bottom 0.80 Left to Right Right to Left 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0.20 0.00 0.00 0 0.05 0.10 0.15 0.20 Width 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .3 04/07 Page 5 of 7 Slotted Optical Switch OPB820, OPB821Z, OPB821S Z OPB820S5 - Flag Next to Emitter OPB820S5 - Flag Next to Sensor 1.20 1.20 Top to Top to 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 Left to Right Right to Left 0.60 0.40 Left to Right Right to Left 0.60 0.40 0.20 0.20 0.00 0.00 0.80 0.05 0.10 0.15 0.20 0.25 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB820S5 - Flag in Middle Slot 1.20 Top to Typical IC(ON) Response (mA) 1.00 0 Top to Bottom 0.80 Left to Right Right to Left Emitter 0.60 Left to Right Right to Left 0.40 Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .3 04/07 Page 6 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Slotted Optical Switch OPB820, OPB821Z, OPB821S Z OPB820S10 - Flag Next to Emitter OPB820S10 - Flag Next to Sensor 1.20 1.20 Top to Top to Bottom 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 0.80 Left to Right Right to Left 0.60 Right to Left 0.60 0.40 0.40 0.20 0.20 0.00 0.00 Left to Right 0.05 0.10 0.15 0.20 Displacement Distance (inches) 0.25 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPB820S10 - Flag in Middle of Slot 1.20 Top to 1.00 Typical IC(ON) Response (mA) 0 Top to Bottom 0.80 Left to Right Right to Left 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0.20 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .3 04/07 Page 7 of 7