Murata BLM03AX800SN1 Emifil (inductor type) chip ferrite bead Datasheet

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead
BLM03AX Series (0201 Size)
c Dimensions
c Equivalent Circuit
0.3±0.03
0.3±0.03
0.6±0.03
0.15±0.05
(Resistance element becomes dominant
at high frequencies.)
: Electrode
(in mm)
c Packaging
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
15000
J
330mm Paper Tape
50000
B
Bulk(Bag)
1000
c Rated Value (p: packaging code)
Part Number
Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C)
Rated Current
DC Resistance
Operating
Temperature Range
10ohm (Typ.)
-
1000mA
0.05ohm max.
-55 to +125°C
BLM03AX100SN1p
BLM03AX800SN1p
80ohm ±25%
-
500mA
0.18ohm max.
-55 to +125°C
BLM03AX121SN1p
120ohm ±25%
-
450mA
0.23ohm max.
-55 to +125°C
BLM03AX241SN1p
240ohm ±25%
-
350mA
0.38ohm max.
-55 to +125°C
BLM03AX601SN1p
600ohm ±25%
-
250mA
0.85ohm max.
-55 to +125°C
BLM03AX102SN1p
1000ohm ±25%
-
200mA
1.25ohm max.
-55 to +125°C
Number of Circuits: 1
c Impedance-Frequency Characteristics (Main Items)
c Impedance-Frequency Characteristics
BLM03AX100SN1
1500
BLM03AX102SN1
1250
16
BLM03AX601SN1
BLM03AX241SN1
Z
12
BLM03AX121SN1
750
Impedance (Ω)
Impedance (Ω)
1000
BLM03AX800SN1
500
R
8
X
4
BLM03AX100SN1
250
0
1
10
0
1
10
100
Frequency (MHz)
1000
100
Frequency (MHz)
1000
3000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
2
Continued from the preceding page.
c Impedance-Frequency Characteristics
c Impedance-Frequency Characteristics
BLM03AX800SN1
BLM03AX121SN1
150
240
180
Impedance (Ω)
Impedance (Ω)
Z
100
R
X
50
Z
120
R
X
60
0
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
1000
3000
BLM03AX601SN1
400
1200
320
900
Z
Impedance (Ω)
Impedance (Ω)
100
Frequency (MHz)
c Impedance-Frequency Characteristics
BLM03AX241SN1
240
R
160
X
Z
600
R
X
300
80
0
10
1
10
100
Frequency (MHz)
1000
0
3000
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM03AX102SN1
1500
Impedance (Ω)
Z
1000
R
500
0
X
1
10
100
Frequency (MHz)
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
3
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/
Similar pages