Powerful Sensing Solutions for a Better Life CXLTG-Series HIGH PERFORMANCE ACCELEROMETER The TG-Series 3-Axis accelerometers are high performance ±2g and ±10g sensors, featuring precision three-layer silicon differential capacitive MEMS sensing elements that provide ultra low noise and excellent stability. The TG-Series sensors are fully signal conditioned and factory calibrated. The single-ended high level analog outputs do not require external signal conditioning and are easy to interface to standard data acquisition systems. Features • Range: ±2g or ±10g • High Stability • Low Noise: 20µg/√Hz Platform Leveling Automotive Testing • Low Power <10mW The TG-Series operates on a single DC supply from 3.3 V to 5.5 V and includes a high performance integrated temperature sensor for additional accuracy under extreme temperature applications. The typical current consumption of 1.5mA makes this triaxial device attractive for battery operated systems.The sensor is packaged in an industrial anodized aluminum package that is moisture resistant and rugged for industrial and automotive applications. • Internal Temperature Sensor Applications • Platform Leveling • Automotive Testing • Seismic Instrumentation 3.3-5.5 VDC @ <2mA Analog x 3 X, Y, Z Acceleration TG Series Analog Phone: 408.964.9700 Fax: 408.854.7702 Temperature E-mail: [email protected] w w w. m e m s i c . c o m CXLTG-Series HIGH PERFORMANCE ACCELEROMETER Performance TG-Series Input Range (°) CXL02TG3 ±2 CXL10TG3 ± 10 Bias Bias Stability1 (mg) Zero g Output (V) Zero g Drift Over Temperature (µV/°C) ± 8.5 ± 2.5 to 0.01 170 ± 12 ± 2.5 to 0.01 170 Scale Factor Sensitivity (mV/g) Span Output (Volts) Cross-Axis2 (% FS) Non-Linearity3 (% FS) Mis-Alignment (% FS) 833 to ± 67 0.5 to 4.5 <3 <1.5 <1.0 167 to ± 13 0.5 to 4.5 <3 <1.5 <1.0 Noise Noise Density (µg/√Hz) Noise at 100 Hz Bandwidth (mg) 20 0.6 20 0.6 Bandwidth Frequency Response (Hz) >200 >200 <3 <3 Temperature Sensor Accuracy (°C) Transfer Function Standard Package 125 Ta (ºC)=[44.4 ºC/V] *[Vtempsensor/(Vsupply/5V)-1.375V] Pin Diagram Specifications Environment Operating Temperature (°C) Non-Operating Temperature (°C) Shock (g) Vibration 20Hz to 500Hz (g rms) Electrical Supply Voltage4 (V) Supply Current (mA) Output Loading, Resistive (kΩ) Output Loading, Capacitive (pF) Physical Size Weight (in) (cm) (oz) (kg) -40 to +85 -40 to +85 1000 (1ms) 20 3.3 to 5.5 <2 10 (min) 50 (max) Pin Color Function 1 Red Input Power 2 Black Ground 3 White X-Axis Out 4 Yellow Y-Axis Out 5 Green Z-Axis Out 6 Blue Temperature 2.235 x 1.435 x 1.105 5.68 x 3.65 x 2.81 3.5 < 0.11 Cable 3’ Long, 6 Conductor, PVC Jacket 1” Pigtail End, Stripped & Tinned Ordering Information Model Description CXL02TG3 ± 2g, Tri-axial Precision Accelerometer CXL10TG3 ± 10g, Tri-axial Precision Accelerometer This product has been developed by Crossbow exclusively for commercial applications. It has not been tested for, and Crossbow makes no representation or warranty as to conformance with, any military specifications or its suitability for any military application or end-use. Additionally, any use of this product for nuclear, chemical or biological weapons, or weapons research, or for any use in missiles, rockets, and/or UAV’s of 300km or greater range, or any other activity prohibited by the Export Administration Regulations, is expressly prohibited without the written consent of Crossbow and without obtaining appropriate US export license(s) when required by US law. Diversion contrary to U.S. law is prohibited. Specifications are subject to change without notice. Notes1 After temperature compensation by user. 2 Cross-axis sensitivity is the output response to acceleration in the orthogonal axes.3 Non-linearity is the deviation of the output from a best fit straight line over fullscale input range All values are specified at operation voltage of 5.0V and temperature of 25ºC unless noted otherwise.4 Sensitivity and Zero g Output are ratiometric to supply voltage. MEMSIC Inc. San Jose, California w w w. m e m s i c . c o m 6020-0675-06 Rev A