FJV4110R FJV4110R Switching Application (Bias Resistor Built In) • Switching circuit, Inverter, Interface circuit, Driver Circuit • Built in bias Resistor (R=10KΩ) • Complement to FJV3110R 3 2 SOT-23 1 1. Base 2. Emitter 3. Collector Equivalent Circuit C Marking R R8 0 B PNP Epitaxial Silicon Transistor E Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage Parameter Value -40 Units V VCEO VEBO Collector-Emitter Voltage -40 V Emitter-Base Voltage -5 IC V Collector Current -100 mA PC Collector Power Dissipation 200 mW TJ Junction Temperature 150 °C TSTG Storage Temperature -55 ~ 150 °C Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO Parameter Collector-Base Breakdown Voltage Test Condition IC= -100µA, IE=0 Min. -40 BVCEO Collector-Emitter Breakdown Voltage IE= -1mA, IB=0 -40 ICBO Collector Cut-off Current VCB= -30V, IE=0 hFE DC Current Gain VCE= -5V, IC= -1mA VCE (sat) Collector-Emitter Saturation Voltage IC= -10mA, IB= -1mA Cob Output Capacitance VCB= -10V, IE=0 f=1MHz fT Current Gain Bandwidth Product VCE= -10V, IC= -5mA R Input Resistor ©2002 Fairchild Semiconductor Corporation Typ. Max. Units V -0.1 µA V 100 600 -0.3 5.5 200 7 10 V pF MHz 13 KΩ Rev. A, August 2002 -1000 10k VCE(sat)[mV], SATURATION VOLTAGE hFE, DC CURRENT GAIN VCE = - 5V R = 10K 1k 100 IC = 10IB R = 10k -100 -10 -1 10 -0.1 -1 -10 -100 IC[mA], COLLECTOR CURRENT -1 -10 -100 -1000 IC[mA], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Collector-Emitter Saturation 280 PC[mW], POWER DISSIPATION 240 200 160 120 80 40 0 0 25 50 75 100 125 150 175 o T a[ C], AMBIENT TEMPERATURE Figure 3. Power Derating ©2002 Fairchild Semiconductor Corporation Rev. A, August 2002 FJV4110R Typical Characteristics FJV4110R Package Dimensions ±0.10 ±0.10 2.40 0.40 ±0.03 1.30 0.45~0.60 0.20 MIN SOT-23 0.03~0.10 0.38 REF 0.40 ±0.03 +0.05 0.12 –0.023 0.96~1.14 0.97REF 2.90 ±0.10 0.95 ±0.03 0.95 ±0.03 1.90 ±0.03 0.508REF Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A, August 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. I1