ERA38-04--ERA38-06 High Efficiency Rectifier VOLTAGE RANGE: 400 --- 600 V CURRENT: 0.5 A DO - 41 Features Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with alcohol,Isopropanol and sim ilar s olvents The plas tic m aterial carries U/L recognition 94V-0 Mechanical Data Dimensions in millimeters Cas e:JEDEC DO--41,m olded plas tic Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 gram s Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 am bient tem perature unless otherwise s pecified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ERA38 - 04 ERA38 - 05 ERA38 - 06 UNITS Maximum recurrent peak reverse voltage V RRM 400 500 600 V Maximum RMS voltage V RMS 280 350 420 V Maximum DC blocking voltage V DC 400 500 600 V Maximum average forw ard rectif ied current 9.5mm lead length, @TA =75 IF(AV) 0.5 A IFSM 10.0 A VF 2.50 V Peak forw ard surge current 8.3ms single half -sine-w ave superimposed on rated load @TJ =125 Maximum instantaneous forw ard voltage @ 0.5A Maximum reverse current @TA =25 at rated DC blocking voltage @TA =100 5.0 IR Maximum reverse recovery time (Note1) t rr Typical junction capacitance (Note2) CJ Typical thermal resistance (Note3) Rθ JA 60 TJ - 55 ----- + 150 TSTG - 55 ----- + 150 Operating junction temperature range Storage temperature range 50 20 ns 15 NOTE: 1. Measured with I F =0.5A, I R=1A, I rr=0.25A. 2. Measured at 1.0MH Z and applied rev erse v oltage of 4.0V DC. 3. Thermal resistance f rom junction to ambient. http://www.luguang.cn Ａ 50.0 mail:[email protected] pF /W ERA38-04--ERA38-06 High Efficiency Rectifier Ratings AND Charactieristic Curves FIG.1--TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 N1. trr 10 N1. +0.5A D.U.T. (+) 0 PULSE GENERATOR (NOTE2) (+) 25VDC (approx) (-) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE1) -0 .2 5 A (-) -1 .0 A 1cm SET TIME BASE FOR 20/30 ns/cm NOTES:1.RISE TIME=7ns MAX.INPUT IMPEDANCE=1MΩ.22pF 2.RISE TIME=10ns MAX.SOURCE IMPEDANCE=50Ω. 0.5 Single Phase Half Wave 60Hz Resisive or Inductive Load 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 150 40 20 10 TJ=25 2 1 0.1 0.2 AMPERES 10 8 6 4 2 0 1 2 4 8 10 20 0.4 1 2 4 10 20 40 100 40 60 80 100 NUMBER OF CYCLES AT 60Hz http://www.luguang.cn FIG.5 -- TYPICAL FORWARD CHARACTERISTIC 10 1.0 AMPERES TJ=125 8.3ms Single Half Sine-Wave INSTANTANEOUS FORWARD CURRENT 14 ERA38-04----ERA38-05 4 REVERSE VOLTAGE,VOLTS 16 12 ERA38-06 60 AMBIENT TEMPERATURE. FIG.4--PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. 200 100 JUNCTION CAPACITANCE,pF 0.6 0.4 FIG.3--TYPICAL JUNCTION CAPACITANCE Z 0.7 AMPERES AVERAGE FORWARD RECTIFIED CURRENT. FIG.2 --FORWARD DERATING CURVE 0.5 TJ=25 Pulse Width=300 µS 0.1 0.01 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS mail:[email protected]