ES1001FL - ES1006FL SMALL SURFACE MOUNT ULTRA FAST DIODES VOLTAGE RANGE: 100 - 600V CURRENT: 1.0A Features ! Glass passivated device ! Ideal for surface mouted applications ! Low reverse leakage ! Metallurgically bonded construction ! High temperature soldering guaranteed: 250 C/10 seconds,0.375”(9.5mm) lead length, B C E 5 lbs. (2.3kg) tension SOD-123FL Dim Min Max Typ A 3.58 3.72 3.65 3 B 2.72 2.78 2.75 C 1.77 1.83 1.80 D 1 1.02 1.08 1.05 E 0.097 1.03 1.00 H 0.13 0.17 0.15 L 0.53 0.57 0.55 All Dimensions in mm Mechanical Data ! ! ! ! ! ! Case: SOD-123FL plastic body over passivated junction Terminals : Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight:0.0007 ounce, 0.02 grams D H L E A Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Characteristic ES1001FL ES1002FL ES1003FL ES1004FL ES1006FL Unit Maximum repetitive peak reverse voltage VRRM 100 200 300 400 600 VOLTS Maximum RMS voltage VRMS 70 140 210 280 420 VOLTS Maximum DC blocking voltage V 100 200 300 400 600 VOLTS DC Maximum average forward rectified current I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 25.0 Amps Maximum instantaneous forward voltage at1.0A Maximum DC reverse current TA =25 C at rated DC blocking voltage TA =100 C VF 1.25 0.95 1.7 Volts IR 5.0 100.0 Maximum reverse recovery time (NOTE 1) trr 35 ns Typical junction capacitance (NOTE 2) CJ 10 pF 85 K/W -55 to +150 C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range R θJA TJ,TSTG µA Note: 1.Measured with IF=0.5A, IR=1A, Irr=0.25A. 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.PCB mounted on 0.2*0.2" (5.0*5.0mm) coppeer pad area. 1 of 2 www.sunmate.tw RATINGS AND CHARACTERISTIC CURVES ES1001FL THRU ES1006FL 1.0 0.8 0.6 Single Phase Half Wave 60Hz Resistive or inductive Load 0.4 0.2 0 0 25 50 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1- FORWARD CURRENT DERATING CURVE 75 100 125 150 30 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 25 20 15 10 5.0 0 175 1 10 AMBIENT TEMPERATURE, C 20 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 1 0.1 ES1001FL-ES1002FL ES1003FL-ES1004FL ES1006FL 0.01 0 0.4 0.8 1.2 1.6 1.8 FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1,000 100 10 TJ=100 C 1 0.1 TJ=25 C 0.01 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 PERCENT OF PEAK REVERSE VOLTAGE,% TRANSIENT THERMAL IMPEDANCE, C/W JUNCTION CAPACITANCE, pF FIG. 5-TYPICAL JUNCTION CAPACITANCE 100 NUMBER OF CYCLES AT 60 Hz FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 REVERSE VOLTAGE,VOLTS 0.1 1 10 100 t,PULSE DURATION,sec. 2 of 2 www.sunmate.tw