VJ High Q Dielectric Vishay Vitramon Multilayer Ceramic Chip Capacitors FEATURES • COG is an ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 ± 30PPM/°C over the entire temperature range. • Low Dissipation Factor (DF). • Ideal for critical timing and tuning applications. GENERAL SPECIFICATIONS NOTE: Electrical characteristics @ + 25°C unless otherwise specified. Capacitance Range: 1.0pF to 680pF. Insulation Resistance (IR): @ + 25°C and rated voltage 100,000 Megohms minimum or 1000 ohm-farads, whichever is less. Temperature Coefficient of Capacitance (TCC): 0 ± 30PPM/°C from - 55°C to + 125°C. @ + 125°C and rated voltage 10,000 Megohms minimum or 100 ohm-farads, whichever is less. Dissipation Factor (DF): 0.1% maximum @ 1.0 Vrms and 1kHz for values > 1000pF. 0.1% maximum @ 1.0 Vrms at 1MHz for values ≤ 1000pF. Dielectric Withstanding Voltage (DWV): 250% of rated voltage for 5 ± 1 seconds, 50 milliamps current maximum. ORDERING INFORMATION VJ PRODUCT SERIES 0805 CASE SIZE Q DIELECTRIC VJ = MLCC 0603 0805 1206 1210 Q = High Q 102 CAPACITANCE NOMINAL CODE A K X DC CAPACITANCE TERMINATION VOLTAGE TOLERANCE RATING A = 50V B = 100V C = 200V Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 102 = 1000pF. 1R8 = 1.8pF. X = Nickel barrier with 100% tin plated finish F = Palladium silver A MARKING T PACKAGING A = Unmarked T = 7" Reel, plastic tape C = 7" Reel, paper tape R = 11 1/4" Reel, plastic tape P = 11 1/4" Reel, paper tape B = Bulk NOTE: 0402 and 0603 available in paper tape only C = ± 0.25pF (1 to 25pF) D = ± 0.5pF (1 to 50pF) F = ± 1% (≥ 10pF) G= ± 2% (≥ 5pF) J = ± 5% (≥ 2pF) K = ± 10% (≥ 1pF) Document Number 45050 Revision 06-Apr-01 www.vishay.com 31 VJ High Q Dielectric Vishay Vitramon HIGH Q DIELECTRIC 0603 E.I.A. TYPE VOLTAGE (VDC) 50 Capacitance Code Capacitance pF 1R0 1.0 1R2 1.2 1R5 1.5 1R8 1.8 2R2 2.2 2R7 2.7 3R3 3.3 3R9 3.9 4R7 4.7 5R6 5.6 6R8 6.8 8R2 8.2 100 10 120 12 150 15 180 18 220 22 270 27 330 33 390 39 470 47 560 56 680 68 820 82 101 100 121 120 151 150 181 180 221 220 271 270 331 330 391 390 471 470 561 560 681 680 821 820 www.vishay.com 32 VJ0805 VJ0603 STYLE 100 0805 — 50 100 VJ1210 VJ1206 1210 1206 200 50 100 200 50 100 200 Document Number 45050 Revision 06-Apr-01 VJ High Q Dielectric Vishay Vitramon TEMPERATURE COEFFICIENT OF CAPACITANCE 2.0 1.5 1.0 0.5 0.0 HIGH Q - 0.5 - 1.0 - 1.5 - 2.0 -75 -50 -25 0 25 50 75 100 125 TEMPERATURE °C RESONANT FREQUENCY (GHz) % CAPACITANCE CHANGE HIGH Q - DIELECTRIC TYPICAL PARAMETERS SERIES RESONANT FREQUENCY - HIGH Q 10 0603 0805 1 1210 1206 0.1 1 10 100 CAPACITANCE (pF) 1000 ESR vs FREQUENCY - VJ0805, 50V Q vs FREQUENCY - VJ0805, 50V 10000 1 10pF 100 ESR (Ω) Q 1000 100pF 10pF 0.1 100pF 10 0.01 1 100 1000 100 1000 FREQUENCY (MHz) FREQUENCY (MHz) ESR vs FREQUENCY - VJ1206, 50V Q vs FREQUENCY - VJ1206, 50V 10000 1 10pF 100 ESR (Ω) Q 1000 100pF 10pF 0.1 100pF 10 0.01 1 100 1000 100 FREQUENCY (MHz) ESR vs FREQUENCY - VJ1210, 50V Q vs FREQUENCY - VJ1210, 50V 1000 1 ESR (Ω) Q 1000 FREQUENCY (MHz) 100 180pF 0.1 680pF 680pF 10 180pF 100 FREQUENCY (MHz) Document Number 45050 Revision 06-Apr-01 0.01 1000 100 1000 FREQUENCY (MHz) www.vishay.com 33