PRODUCT DATASHEET Laura series last update 9/5/2014 DETAILS Product Number CP13308_LAURA-O-WAS-PG Family Laura Type Assembly Color white Diameter 21,6 x 21,6 mm Height 12,9 mm Style square Optic Material PMMA,PC Holder Material Fastening glue, pin Status production ready ROHS Comliant Yes Date Updated 9/05/2014 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-G Asymmetric degOval 84 % 2.600 - XT-E Asymmetric degOval 83 % 2.500 - XP-E Asymmetric degOval 84 % 3.000 - XB-D Asymmetric degOval 83 % 2.500 - XP-G2 asymmetric degOval 83 % 2.900 - LUXEON Rebel Asymmetric degOval 87 % 3.100 - LUXEON A Asymmetric degOval 84 % 2.300 - LUXEON Q asymmetric degOval 85 % 2.600 - NCSxx19A Asymmetric degOval 83 % 2.500 - NVSxx19A Asymmetric degOval 82 % 2.200 - NCSxx19B asymmetric degOval 82 % 3.000 - Oslon SSL 150 Asymmetric degOval 84 % 3.100 - Oslon SSL 80 Asymmetric degOval 83 % 2.600 - Oslon Square EC Asymmetric degOval 84 % 2.400 - June 7th 2017 7:11 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 4 4 21.6 9.2 21.6 Isometric view 2 3 8.6 3 c/c 1 12.9 Bottom view Front view 2 2 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE LAURA-WAS-PG SIZE A4 SCALE D 1 PART NUMBER 3:2 WEIGHT - SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.