PRODUCT DATASHEET CS15759_HB-2X2MX-8-W HB-2X2MX-8-W ~50° wide beam. New revision. TECHNICAL SPECIFICATIONS: Dimensions 90x90 mm Height 16.9 mm Fastening screw Colour clear Box size 476 x 273 x 292 mm Box weight 8.8 kg Quantity in Box 156 pcs ROHS compliant yes MATERIAL SPECIFICATIONS: Component Type Material Colour HB-2X2MX-8-W STRADA-2X2MX-8-SEAL Lens array Seal PMMA Silicone clear clear Last update: 11/09/2017 Subject to change without prior notice LEDiL is a registered trademark of LEDiL Oy in the European Union, USA, and certain other countries. 1/5 PRODUCT DATASHEET CS15759_HB-2X2MX-8-W Last update: 11/09/2017 Subject to change without prior notice LEDiL is a registered trademark of LEDiL Oy in the European Union, USA, and certain other countries. 2/5 PRODUCT DATASHEET CS15759_HB-2X2MX-8-W PHOTOMETRIC DATA (MEASURED): LED CXA/B 15xx FWHM 51.0° Efficiency 90 % Peak intensity 0.900 cd/lm Required components: Bender Wirth: 441 Typ 2x2MX HV LED LUXEON M/MX FWHM 50.0° Efficiency 93 % Peak intensity 1.100 cd/lm Required components: LED NV9W149AM FWHM 63.0° Efficiency 94 % Peak intensity 0.730 cd/lm Required components: Last update: 11/09/2017 Subject to change without prior notice LEDiL is a registered trademark of LEDiL Oy in the European Union, USA, and certain other countries. 3/5 PRODUCT DATASHEET CS15759_HB-2X2MX-8-W PHOTOMETRIC DATA (SIMULATED): LED SMD 5050 FWHM 48.0° Efficiency 94 % Peak intensity 1.250 cd/lm Required components: LED CLU700/701 FWHM 43.0° Efficiency 88 % Peak intensity 1.500 cd/lm Required components: Bender Wirth: 434 Typ 2x2MX HV LED PSL440 FWHM 49.0° Efficiency 94 % Peak intensity 1.310 cd/lm Required components: LED PSL445 FWHM 57.0° Efficiency 92 % Peak intensity 0.948 cd/lm Required components: Last update: 11/09/2017 Subject to change without prior notice LEDiL is a registered trademark of LEDiL Oy in the European Union, USA, and certain other countries. 4/5 PRODUCT DATASHEET CS15759_HB-2X2MX-8-W GENERAL INFORMATION: NOTE: The typical beam angle will be changed by different color, chip size and chip position tolerance. The typical total beam angle is the full angle measured where the luminous intensity is half of the peak value. Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range. MATERIALS: As part of our continuous research and improvement processes, and to ensure the best possible quality and availability of our products, LEDiL reserves the right to change material grades without notice. PRODUCT DATA USER AGREEMENT AND DISCLAIMER: The measured data in the provided downloadable LEDiL Product Datasheets and Mechanical 2D-Drawings is rounded and provided as reference for planning. LEDiL Oy's optical specifications have been verified by conducting performance testing of the products in accordance with the company's quality system. The reported data are averaged results of multiple measurements with typical variation. LEDiL Oy reserves the right to without prior notification make changes and improvements to its products. LEDiL Oy Joensuunkatu 13 FI-24240 SALO Finland LEDiL Inc. 228 West Page Street Suite D Sycamore IL 60178 USA Local sales and technical support www.ledil.com/ where_to_buy Shipping locations Salo, Finland Hong Kong, China Distribution Partners www.ledil.com/ where_to_buy LEDiL Oy assumes neither warranty, nor guarantee nor any other liability of any kind for the contents and correctness of the provided data. The provided data has been generated with highest diligence but the provided data may in reality not represent the complete possible variation range of all intrinsic parameters. Therefore, in certain cases a deviation from the provided data could occur. LEDiL Oy reserves the right to undertake technical changes of its products without further notification which could lead to changes in the provided data. LEDiL Oy assumes no liability of any kind for the possible deviation from any provided data or any other damage resulting from the usage of the provided data. The user agrees to this disclaimer and user agreement with the download or usage of the provided files. Last update: 11/09/2017 Subject to change without prior notice LEDiL is a registered trademark of LEDiL Oy in the European Union, USA, and certain other countries. 5/5