AZ880 AZ 10 A SPST / 8 A DPST POLARIZED SUBMINIATURE POWER RELAY SINGLE SIDE STABLE (NON-LATCHING) AND BISTABLE (LATCHING) FEATURES • • • • • Dielectric strength 4000 Vrms Single and dual coil latching versions available Epoxy sealed version available 10 Amp switching UL, CUR file E44211 GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 106 at 10 A 250 VAC resistive (SPST) Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Set Time (typical) 5 ms at nominal coil voltage Reset Time (typical) 4 ms at nominal coil voltage Dielectric Strength (at sea level) 4000 3000 1000 2000 Insulation Resistance 1000 megohms min. at 20°C 500 Vdc 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062” DA at 10 to 55 Hz Shock 10 g functional Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 6 grams CONTACTS Arrangement SPST (1 Form A), DPST (2 Form A) DPST (1 Form A and 1 Form B) Ratings Resistive load: Max. switched power: 300 W or 2500 VA (SPST) 240 W or 2000 VA (DPST) Max. switched current: 10 A (SPST) 8 A (DPST) Max. switched voltage: 150 VDC or 380 VAC* *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR SPST 10 A at 250 VAC general use, 30k cycles 10 A at 30 VDC resistive, 30k cycles 1/3 HP at 250 VAC B300 Pilot Duty DPST 8 A at 250 VAC general use, 30k cycles 8 A at 30 VDC resistive, 30k cycles 1/3 HP at 250 VAC 1/4 HP at 125 VAC Material Silver nickel, gold plating optional Resistance < 50 milliohms initially (6 V 1 A voltage drop method) Vrms Vrms Vrms Vrms coil to contact (-1A, -1AB) coil to contact (-2A) between contacts between contact sets COIL Power At Pickup Voltage 137 mW ( 2A single side stable, 2 coil latching) (typical) 98 mW (1 coil latching or 1A or 1AB single side stable) Max. Continuous Dissipation 0.75 W at 20°C (68°F) ambient Temperature Rise 30°C (54°F) at nominal coil voltage Max. Temperature 105°C (221°F) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. 9/6/06W AZ880 AZ RELAY ORDERING DATA AZ880 COIL SPECIFICATIONS - 1 FORM A AND 1 FORM A/1 FORM B Nominal Coil VDC 3 Must. Operate VDC 2.1 5 6 Max. Continuous VDC ORDER NUMBER* 1 Form A 1 Form A 1 Form B 5.8 Coil Resistance ± 10% 45 AZ880-1A-3D AZ880-1AB-3D 3.5 9.7 125 AZ880-1A-5D AZ880-1AB-5D 4.2 11.6 180 AZ880-1A-6D AZ880-1AB-6D 9 6.3 17.4 405 AZ880-1A-9D AZ880-1AB-9D 12 8.4 23.2 720 AZ880-1A-12D AZ880-1AB-12D 24 16.8 46.5 2880 AZ880-1A-24D AZ880-1AB-24D *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. AZ880 COIL SPECIFICATIONS - 2 FORM A ORDER NUMBER* Nominal Coil VDC 3 Must. Operate VDC 2.1 Max. Continuous VDC 4.9 Coil Resistance ± 10% 32.1 5 3.5 AZ880-2A-3D 8.2 89.3 AZ880-2A-5D 6 9 4.2 9.8 129 AZ880-2A-6D 6.3 14.7 289 AZ880-2A-9D 12 8.4 19.6 514 AZ880-2A-12D 24 16.8 39.3 2056 AZ880-2A-24D 2 Form A *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. AZ880P1 COIL SPECIFICATIONS - SINGLE COIL LATCHING Nominal Coil VDC 3 Must. Operate VDC 2.1 Max. Continuous VDC 5 3.5 6 ORDER NUMBER* 5.8 Coil Resistance ± 10% 45 2 Form A 1 Form A 1 Form B 9.7 125 AZ880P1-1A-3D AZ880P1-2A-3D AZ880P1-1AB-3D AZ880P1-1A-5D AZ880P1-2A-5D 4.2 11.6 AZ880P1-1AB-5D 180 AZ880P1-1A-6D AZ880P1-2A-6D AZ880P1-1AB-6D 1 Form A 9 6.3 17.4 405 AZ880P1-1A-9D AZ880P1-2A-9D AZ880P1-1AB-9D 12 8.4 23.2 720 AZ880P1-1A-12D AZ880P1-2A-12D AZ880P1-1AB-12D 24 16.8 46.5 2880 AZ880P1-1A-24D AZ880P1-2A-24D AZ880P1-1AB-24D *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. AZ880P2 COIL SPECIFICATIONS - DUAL COIL LATCHING ORDER NUMBER* Nominal Coil VDC 3 Must. Operate VDC 2.1 Max. Continuous VDC AZ880P2-1A-3D AZ880P2-2A-3D AZ880P2-1AB-3D 5 3.5 8.2 89.3 AZ880P2-1A-5D AZ880P2-2A-5D AZ880P2-1AB-5D 6 4.2 9.8 129 AZ880P2-1A-6D AZ880P2-2A-6D AZ880P2-1AB-6D 9 6.3 14.7 289 AZ880P2-1A-9D AZ880P2-2A-9D AZ880P2-1AB-9D 12 8.4 19.6 514 AZ880P2-1A-12D AZ880P2-2A-12D AZ880P2-1AB-12D 24 16.8 39.3 2056 AZ880P2-1A-24D AZ880P2-2A-24D AZ880P2-1AB-24D 4.9 Coil Resistance ± 10% 32.1 1 Form A 2 Form A 1 Form A 1 Form B *Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. 9/6/06W AZ880 AZ MECHANICAL DATA PC Board Layout Outline Dimensions Single side stable or 1 coil latching relay Single side stable or 1 coil latching relay 2A &1AB 1A 0.787MAX [20.0] 0.591MAX [15.0] 0.402MAX [10.2] 0.031 [0.80] 0.031 [0.8] 0.142 [3.6] 0.049 [1.25] 0.400 [10.16] 0.300 [7.62] 0.049 [1.25] 0.400 [10.16] 0.400 [10.16] 0.300 [7.62] 0.400 [10.16] [0.80] 0.400 [10.16] 0.400 [10.16] 0.400 [10.16] 0.016 [0.4] 0.031 [0.8] 0.300 [7.62] 0.400 [10.16] 4-Ø0.047 [Ø1.2] 0.787MAX [20.0] 2A &1AB 0.787MAX [20.0] 0.591MAX [15.0] 0.591MAX [15.0] 1A 2A &1AB 0.400 [10.16] 0.402MAX [10.2] 0.402MAX [10.2] 0.300 [7.62] 0.400 [10.16] 0.300 [7.62] 0.142 [3.6] 0.142 [3.6] 0.049 [1.25] 6-Ø0.047 [Ø1.2] 2 coil latching relay 2 coil latching relay 1A 0.300 [7.62] 0.402MAX [10.2] 0.142 [3.6] 0.016 [0.4] 2A &1AB 1A 0.591MAX [15.0] 0.787MAX [20.0] 0.400 [10.16] 0.100 [2.54] 0.031 [0.8] 0.300 [7.62] 0.016 [0.4] 0.400 [10.16] 0.400 [10.16] 0.049 [1.25] 0.100 [2.54] 0.300 [7.62] 0.031 [0.8] 0.016 [0.4] 0.400 [10.16] 0.400 [10.16] 0.400 [10.16] 0.100 [2.54] 0.100 [2.54] 6-Ø0.047 [Ø1.2] 8-Ø0.047 [Ø1.2] Viewed toward terminals Wiring Diagram Single side stable 2A 1A - - + + 2A 1A 1AB - - SET + 2 coil latching relay 1 coil latching relay + + RESET - - SET RESET + 1AB + - - SET + RESET + - 2A 1A - SET + - - RESET + SET + - 1AB - RESET + SET + - RESET + Viewed toward terminals. Relays shown in de-energized or reset state. Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 9/6/06W