DS9094SM Surface-Mount iButton Clip www.maxim-ic.com FEATURES ORDERING INFORMATION Compact Single-Piece, All-Metal Clip for ibutton® Mounting Lowest Profile iButton Mount Made from 0.25mm Thick Tin-Plated Phosphor Bronze Withstands High Temperatures Required for Surface Mounting Can be Soldered, Riveted, or Screw-Mounted Compatible with Leaded and Lead-Free Solder Processes DS9094SM3+ Clip for F3 iButton DS9094SM5+ Clip for F5 iButton MOUNTING PAD LAYOUT Keep-out area Ø 19.05 Data pad Ø 13.97 5.72 Ground 6.35 Available for F3 and F5 iButton 29.36 DS9094SM3 DS9094SM5 Hole centered ∅ 2.35 Hole centered ∅ 2.35 5.08 17.57 5.08 17.57 28.09 ± 0.38 28.09 ± 0.38 4.81 4.81 6.81 4.01 All dimensions are in millimeters. DESCRIPTION The DS9094SM is a low-cost, surface-mount device that retains a 16.3mm iButton on a printed circuit board. Two springs that double as ground contacts press the iButton to the data pad on the printed circuit board. The iButton can be inserted and extracted without special tools. For best results the data contact on the printed circuit board should be plated with a layer of minimum 0.76µm hard gold over minimum 3.81µm nickel. iButton is a registered trademark of Dallas Semiconductor. 1 of 1 050207