LinkCom DBFN0040U142-00G 0-10v dimmable Datasheet

0-10V Dimmable
Constant Current Mode
45-DBFN Series
FEATURES:
● AC Input 100~277Vac
● Built-in Active PFC Function
● Built-in : 24V/0.1A Max ( For Lighting Sensor )
● Protection: SCP / OVP / OTP
● High Operating Ambient Temp.: 0℃~+50℃
● Surge protection: Line to Line 2KV
● Safety: Meet UL / PSE
● EMI: Meet FCC / CE
● Warranty: 7 [email protected]<75℃ (refer to warranty policy)
● RoHS Compliant
● Dimming 0V-10V
PRODUCT SPECIFICATION
OUTPUT
CURRENT(A)
OUTPUT
CURRENT
TOLERANCE
EFFICIENCY
O/P NOISE(P-P,V)
12-24
1.5
±7%
85.0%
1% Vo(max.)
12-24
1.8
±7%
85.0%
1% Vo(max.)
40.5
15-30
1.35
±7%
87.0%
1% Vo(max.)
DBFNA040U142-00G
42
15-30
1.4
±7%
87.0%
1% Vo(max.)
DBFN0040U102-00G
36
18-36
1
±10%
87.0%
1% Vo(max.)
DBFN0040U112-00G
37.8
18-36
1.05
±10%
87.0%
1% Vo(max.)
DBFN0040U901-00G
43.2
24-48
0.9
±10%
87.0%
1% Vo(max.)
DBFN0040U701-00G
39.2
28-56
0.7
±7%
87.0%
1% Vo(max.)
DC OUTPUT
POWER(W)
DC OUTPUT
VOLTAGE(V)
DBFN0040U152-00G
36
DBFN0040U182-00G
43.2
DBFN0040U142-00G
MODEL
ELECTRICAL SPECIFICATION
INPUT VOLTAGE RANGE
90-305Vac, 127-431Vdc, Normal: 100-277Vac
INPUT FREQUENCY
Range: 47-63Hz, Normal: 50-60Hz
ACTIVE POWER FACTOR
>0.9@Full Load 100-277Vac
THD
<15% at Full Load 277Vac
TURN ON DELAY TIME
<1S at Full Load 100-277Vac
AC CURRENT
0.7A / 100Vac 0.3A/277Vac
Cold Start 65A@230Vac
INRUSH CURRENT (typ)
LEAKAGE CURRENT
<0.75mA at 277Vac
SHORT CIRCUIT PROTECTION
OVER VOLTAGE PROTECTION
SCP , OVP , OTP will restart automatically after the fault condition is removed
OVER TEMP. PROTECTION
OPERATING TEMP.
0℃~+50℃@Full Load 120-277Vac
STORAGE TEMP.
-20℃~+80℃
10% to +90%, non-cond.
RELATIVE HUMIDITY
SAFETY
Meet UL 8750 / PSE
EMI
Meet FCC Part15 / Meet EN 55015
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:4242VDC, I/P-FG:2121VDC
I/P-O/P, I/P-FG,O/P-FG :10M Ohms / 500VDC / 25℃ / 70% RH
DIMENSION (L*W*H)
372 * 30 * 27 mm【14.6 * 1.18 * 1.06 inch】
(1) All parameters not specially mentioned are measured 230VAC input.
(2) All specifications Typical @25℃, unless otherwise noted, at normal line and load.
(3) Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk @20MHz bandwidth.
(4) Specified for free-air convection cooling.
(5) Minimum load is NOT required for proper operation .
(6) 100% Production Tested.
*REFERENCE: www.linkcom.com.tw
*Please contact [email protected], [email protected] for more information
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw
45-DBFN Series
0-10V Dimmable
Constant Current Mode
DIMENSIONS
Wiring Digram
Line
Dim+
DimLED +
LEDLoad+
Load-
*REFERENCE: www.linkcom.com.tw
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw
0-10V Dimmable
Constant Current Mode
45-DBFN Series
DIMMING OPERATION
Parameters
Minimum
Typical
1V
─
10V
0mA
─
1mA
Absolute maximum voltageon on the 0-10(+) Purple Wire
Source current on the 0-10V(+) Purple Wire
Maximum
Output Current / 1-10VDC Dimming Input
100.0%
90.0%
Output Current %
80.0%
70.0%
60.0%
50.0%
40.0%
30.0%
20.0%
10.0%
0.0%
0
1
2
3
4
5
6
7
8
9
10
Dimming Input(VDC)
Notes:
1. Dim+ and Dim- wires on the output side are used for 1-10V dimming.
2. Recommended dimmers are Leviton IP710,Lutron NTSTV-DV or equivalent.
3. When dimming wires are open, the output current will be at 100%.
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw
Similar pages