MURS230T3, MURS240T3 Surface Mount Ultrafast Power Rectifiers Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. http://onsemi.com Features • • • • • Small Compact Surface Mountable Package with J−Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (0.95 Volts Max @ 2.0 A, TJ = 150°C) Pb−Free Packages are Available ULTRAFAST RECTIFIERS 2 AMPERES, 300−400 VOLTS Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 95 mg (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • SMB CASE 403A Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead MARKING DIAGRAM MAXIMUM RATINGS Rating Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage MURS230T3 MURS240T3 VRRM VRWM VR Average Rectified Forward Current @ TL = 150°C @ TL = 125°C IF(AV) Non−Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 35 A TJ −65 to +175 °C Operating Junction Temperature Range Value AYWW U2x G G Unit V 300 400 A 1.0 2.0 THERMAL CHARACTERISTICS A Y WW U2x = = = = Assembly Location Year Work Week Device Code x= F for MURS230T3 = G for MURS240T3 G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Rating Symbol Max Unit Device Package Shipping† Thermal Resistance, Junction−to−Lead (TL = 25°C) RqJL 13 °C/W MURS230T3 SMB 2500 Tape & Reel SMB (Pb−Free) 2500 Tape & Reel SMB 2500 Tape & Reel SMB (Pb−Free) 2500 Tape & Reel Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. MURS230T3G MURS240T3 MURS240T3G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2010 January, 2010 − Rev. 6 1 Publication Order Number: MURS230T3/D MURS230T3, MURS240T3 ELECTRICAL CHARACTERISTICS Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 1) (iF = 2.0 A, TJ = 25°C) (iF = 2.0 A, TJ = 150°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 150°C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) trr Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/ms, Rec. to 1.0 V) tfr Value Unit V 1.30 1.05 mA 5.0 150 ns 65 50 50 ns 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. 10 10 7.0 7.0 5.0 5.0 3.0 3.0 100°C 175°C 2.0 I , INSTANTANEOUS FORWARD CURRENT (mA) F I , INSTANTANEOUS FORWARD CURRENT (AMPS) F 175°C TC = 25°C 1.0 0.7 0.5 0.3 0.2 TC = 25°C 1.0 0.7 0.5 0.3 0.2 0.1 0.1 0.07 0.07 0.05 0.05 0.03 0.03 0.02 0.02 0.01 100°C 2.0 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0.3 vF, INSTANTANEOUS VOLTAGE (VOLTS) 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 vF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 2. Maximum Forward Voltage Figure 1. Typical Forward Voltage http://onsemi.com 2 2.1 2.3 MURS230T3, MURS240T3 1000 10 IR, REVERSE CURRENT (mA) TJ = 175°C TJ = 150°C 1 TJ = 100°C 0.1 0.01 TJ = 25°C 0.001 0 50 100 150 200 250 350 300 TJ = 175°C 100 TJ = 150°C 1 0.1 400 TJ = 100°C 10 TJ = 25°C 0 100 50 150 200 250 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current* Figure 4. Maximum Reverse Current for MURS230T3 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estim ated from these same curves if applied VR is sufficiently below rated VR. 1000 IR, REVERSE CURRENT (mA) IR, REVERSE CURRENT (mA) 100 TJ = 175°C 100 TJ = 150°C 10 TJ = 100°C 1 TJ = 25°C 0.1 0 50 100 150 200 250 300 350 VR, REVERSE VOLTAGE (VOLTS) Figure 5. Maximum Reverse Current for MURS240T3 http://onsemi.com 3 400 300 MURS230T3, MURS240T3 35 30 30 NOTE: TYPICAL CAPACITANCE AT 0 V = 26 pF 20 C, CAPACITANCE (pF) C, CAPACITANCE (pF) 25 15 10 5 25 20 15 10 5 0 0 4.0 8.0 12 16 20 24 28 32 36 40 0 16 20 24 28 32 36 VR, REVERSE VOLTAGE (VOLTS) 9 8 7 6 dc 5 4 3 2 SQUARE WAVE 0 90 12 Figure 7. Maximum Capacitance RATED VOLTAGE APPLIED RqJL = 13°C/W TJ = 175°C 80 8 VR, REVERSE VOLTAGE (VOLTS) 10 1 4 Figure 6. Typical Capacitance PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) NOTE: MAXIMUM CAPACITANCE AT 0 V = 30 pF 100 110 120 130 140 150 160 170 180 5 TJ = 175°C 4 3 SQUARE WAVE 2 dc 1 0 0 TC, CASE TEMPERATURE (°C) 0.5 1.0 1.5 2.0 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Power Dissipation Figure 8. Current Derating, Case http://onsemi.com 4 40 2.5 MURS230T3, MURS240T3 PACKAGE DIMENSIONS SMB CASE 403A−03 ISSUE G HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. E b DIM A A1 b c D E HE L L1 D MIN 1.90 0.05 1.96 0.15 3.30 4.06 5.21 0.76 MILLIMETERS NOM MAX 2.13 2.45 0.10 0.20 2.03 2.20 0.23 0.31 3.56 3.95 4.32 4.60 5.44 5.60 1.02 1.60 0.51 REF MIN 0.075 0.002 0.077 0.006 0.130 0.160 0.205 0.030 INCHES NOM 0.084 0.004 0.080 0.009 0.140 0.170 0.214 0.040 0.020 REF MAX 0.096 0.008 0.087 0.012 0.156 0.181 0.220 0.063 A L L1 A1 c SOLDERING FOOTPRINT* 2.261 0.089 2.743 0.108 2.159 0.085 SCALE 8:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MURS230T3/D