EMT1DXV6 Dual General Purpose Transistor PNP Dual This transistor is designed for general purpose amplifier applications. It is housed in the SOT−563 which is designed for low power surface mount applications. (3) Features • Lead−Free Solder Plating • Low VCE(SAT), t0.5 V • NSV Prefix for Automotive and Other Applications Requiring • http://onsemi.com Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant (1) Q1 Q2 (4) (5) (6) 6 MAXIMUM RATINGS Rating (2) Symbol Value 1 Unit SOT−563 CASE 463A STYLE 1 Collector −Emitter Voltage VCEO −60 V Collector −Base Voltage VCBO −50 V Emitter −Base Voltage VEBO −6.0 V IC −100 mAdc MARKING DIAGRAM Symbol Max Unit 3T M G G Collector Current − Continuous THERMAL CHARACTERISTICS Characteristic (One Junction Heated) Total Device Dissipation TA = 25°C PD Derate above 25°C 1 mW/°C 3T = Specific Device Code M = Month Code G = Pb−Free Package (Note: Microdot may be in either location) RqJA 350 (Note 1) °C/W Symbol Max Unit ORDERING INFORMATION mW See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Thermal Resistance, Junction-to-Ambient Characteristic (Both Junctions Heated) mW 357 (Note 1) 2.9 (Note 1) Total Device Dissipation TA = 25°C PD 500 (Note 1) 4.0 (Note 1) Derate above 25°C mW/°C Thermal Resistance, Junction-to-Ambient RqJA 250 (Note 1) °C/W Junction and Storage Temperature Range TJ, Tstg −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR−4 @ Minimum Pad. © Semiconductor Components Industries, LLC, 2014 November, 2014 − Rev. 2 1 Publication Order Number: EMT1DXV6T1/D EMT1DXV6 ELECTRICAL CHARACTERISTICS (TA = 25°C) Symbol Min Typ Max Unit Collector−Base Breakdown Voltage (IC = −50 mAdc, IE = 0) V(BR)CBO −60 − − Vdc Collector−Emitter Breakdown Voltage (IC = −1.0 mAdc, IB = 0) V(BR)CEO −50 − − Vdc Emitter−Base Breakdown Voltage (IE = −50 mAdc, IE = 0) V(BR)EBO −6.0 − − Vdc Collector−Base Cutoff Current (VCB = −30 Vdc, IE = 0) ICBO − − −0.5 nA Emitter−Base Cutoff Current (VEB = −5.0 Vdc, IB = 0) IEBO − − −0.5 mA − − −0.5 120 − 560 − 140 − − 3.5 − Characteristic Collector−Emitter Saturation Voltage (Note 2) (IC = −50 mAdc, IB = −5.0 mAdc) VCE(sat) DC Current Gain (Note 2) (VCE = −6.0 Vdc, IC = −1.0 mAdc) Vdc hFE Transition Frequency (VCE = −12 Vdc, IC = −2.0 mAdc, f = 30 MHz) − fT Output Capacitance (VCB = −12 Vdc, IE = 0 Adc, f = 1 MHz) COB MHz pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width ≤ 300 ms, D.C. ≤ 2%. ORDERING INFORMATION Package Shipping† EMT1DXV6T1G SOT−563 (Pb−Free) 4000 / Tape & Reel NSVEMT1DXV6T1G* SOT−563 (Pb−Free) 4000 / Tape & Reel EMT1DXV6T5G SOT−563 (Pb−Free) 8000 / Tape & Reel NSVEMT1DXV6T5G* SOT−563 (Pb−Free) 8000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. http://onsemi.com 2 EMT1DXV6 TYPICAL CHARACTERISTICS 1000 VCE = 10 V 120 90 300 mA 250 200 60 150 IB = 50 mA 0 3 6 12 9 10 0.1 15 10 100 IC, COLLECTOR CURRENT (mA) Figure 1. IC − VCE Figure 2. DC Current Gain 900 TA = 25°C 800 COLLECTOR VOLTAGE (mV) VCE , COLLECTOR‐EMITTER VOLTAGE (V) 1 VCE, COLLECTOR VOLTAGE (V) 2 1.5 1 0.5 700 600 500 400 300 TA = 25°C VCE = 5 V 200 100 0 0.01 0.1 1 10 0 0.2 100 1 5 10 20 40 60 80 IC, COLLECTOR CURRENT (mA) Figure 3. Collector Saturation Region Figure 4. On Voltage 13 14 12 12 11 10 9 8 7 6 0.5 IB, BASE CURRENT (mA) Cob, CAPACITANCE (pF) Cib, INPUT CAPACITANCE (pF) TA = - 25°C 100 100 30 0 TA = 25°C TA = 75°C DC CURRENT GAIN IC, COLLECTOR CURRENT (mA) TA = 25°C 100 150 200 10 8 6 4 2 0 1 2 3 0 4 0 VEB (V) 10 20 VCB (V) Figure 5. Capacitance Figure 6. Capacitance http://onsemi.com 3 30 40 EMT1DXV6 PACKAGE DIMENSIONS SOT−563, 6 LEAD CASE 463A ISSUE F D −X− 5 6 1 2 L 4 E −Y− 3 b e NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. A HE DIM A b C D E e L HE C 5 PL 6 0.08 (0.003) M X Y MILLIMETERS MIN NOM MAX 0.50 0.55 0.60 0.17 0.22 0.27 0.08 0.12 0.18 1.50 1.60 1.70 1.10 1.20 1.30 0.5 BSC 0.10 0.20 0.30 1.50 1.60 1.70 INCHES NOM MAX 0.021 0.023 0.009 0.011 0.005 0.007 0.062 0.066 0.047 0.051 0.02 BSC 0.004 0.008 0.012 0.059 0.062 0.066 MIN 0.020 0.007 0.003 0.059 0.043 STYLE 1: PIN 1. EMITTER 1 2. BASE 1 3. COLLECTOR 2 4. EMITTER 2 5. BASE 2 6. COLLECTOR 1 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative EMT1DXV6T1/D