2 TYPE Multilayer Chip Inductors LL2012FHL Meeting Your Needs The LL2012-FHL Series is a multilayer ceramic chip inductor with an EIA standard 0805 footprint, lead-free terminations, and expanded electrical specifications with respect to inductance and Q. W L T A Polarity Marking Type L (mm) LL2012FHL 2.0±0.2 Features • Inductance range: 1.5-680nH (E-12 Series) • Miniature size: 0805 footprint (2mm x 1.2mm) • Inductance specified at 100MHz and 800MHz • Laminated ceramic allows high SRF • Q: 49 ~ 96 typical (at 1800MHz) • Temperature coefficient of inductance: +250ppm/°C • Temperature range: –40°C to +100°C • S-parameter data available upon request • Packaged on tape in 4,000 (L ≤ 39nH) and 3,000 (L ≥ 47nH) piece quantities • Reflow solderable • Lead-free terminations W (mm) 1.25±0.2 T (mm) 0.60±0.2 0.85±0.3 1.00±0.3 1.20±0.3 Unit: mm A (mm) 0.5±0.3 Part Numbering LL 2012 - FHL 1N5 S Tolerance (S=±0.3nH, J=±5%) Inductance Material Dimensions (LxW) Type Name STANDARD PARTS SELECTION GUIDE TYPE LL2012-FHL Inductance & Tolerance TOKO Part Number LL2012-FHL1N5S LL2012-FHL1N8S LL2012-FHL2N2S LL2012-FHL2N7S LL2012-FHL3N3S LL2012-FHL3N9S LL2012-FHL4N7S LL2012-FHL5N6S LL2012-FHL6N8J LL2012-FHL8N2J LL2012-FHL10NJ LL2012-FHL12NJ LL2012-FHL15NJ LL2012-FHL18NJ LL2012-FHL22NJ LL2012-FHL27NJ LL2012-FHL33NJ LL2012-FHL39NJ LL2012-FHL47NJ LL2012-FHL56NJ LL2012-FHL68NJ LL2012-FHL82NJ LL2012-FHLR10J LL2012-FHLR12J LL2012-FHLR15J LL2012-FHLR18J LL2012-FHLR22J LL2012-FHLR27J LL2012-FHLR33J LL2012-FHLR39J LL2012-FHLR47J LL2012-FHLR56J LL2012-FHLR68J at 100MHz at 800 (500, 300, 200) MHz Q min. Lo (nH) L Tol.* Lo (nH) L Tol.* Freq. (MHz) 100 MHz 100 MHz 300 MHz 500 MHz 800 MHz 1000 MHz 1800 MHz 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120** 150** 180** 220** 270*** 330*** 390*** 470*** 560*** 680*** S S S S S S S S J J J J J J J J J J J J J J J J J J J J J J J J J 1.5 1.7 2.1 2.42 3.0 3.7 4.6 5.7 6.7 8.2 10.2 12.7 15.8 19.5 24.5 31.2 38.5 50.7 63.9 62.7 80.3 103 142 139 173 194 234 303 382 500 — — — ± 0.5nH ± 0.5nH ± 0.5nH ± 0.5nH ± 0.5nH ± 0.5nH ± 0.5nH ± 0.5nH ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% — — — 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 500 500 500 500 300 300 200 200 200 200 200 — — — 11 12 12 12 12 12 12 12 12 15 15 16 16 16 16 16 16 16 17 17 17 20 20 16** 16** 10*** 10*** 11*** 11*** 11*** 11*** 11*** 11*** 15.3 14.0 16.7 15.5 15.4 16.0 16.5 17.0 18.7 18.5 18.9 20.5 22.1 22.9 21.6 22.8 23.0 24.6 24.8 26.1 25.7 26.5 27.7 26.4 29.2 28.2 25.1 23.6 26.0 25.0 25.5 24.5 26.5 27.5 25.0 29.5 27.5 29.0 29.7 30.4 31.3 33.3 32.2 33.7 36.5 39.5 40.7 38.0 39.6 39.9 41.4 41.8 43.3 41.8 41.4 43.3 38.2 40.3 33.2 32.8 28.8 28.6 21.1 — — — 37.5 33.9 39.9 36.8 39.2 39.7 40.9 42.1 44.6 42.4 44.4 47.5 51.5 52.9 48.6 49.4 49.9 50.0 49.5 50.0 46.2 43.1 41.4 31.0 29.6 — — — — — — — — 52.0 46.6 55.0 50.8 52.6 53.4 54.3 55.2 58.1 54.8 56.9 60.8 64.2 64.9 56.8 57.4 55.6 50.9 47.4 44.5 33.6 21.5 — — — — — — — — — — — 61.5 54.0 62.6 57.8 59.2 59.7 61.0 61.0 63.9 59.5 61.5 65.9 68.2 68.4 57.4 57.3 54.4 45.5 39.4 34.5 18.1 — — — — — — — — — — — — 79.3 78.4 96.4 89.0 96.4 76.8 81.0 76.9 89.7 73.2 75.7 79.8 67.9 49.3 — — — — — — — — — — — — — — — — — — — * Add tolerance to part number: S=±0.3nH, J = ±5% **50MHz ***25MHz Testing Conditions: (1) L,Q: Agilent 4291A/B (Test fixture Agilent 16192A) 1.800.PIK.TOKO Q (Typ.) www.tokoam.com (2) SRF: Agilent 8719D, 8720D 1.847.297.0070 SRF (MHz) min. RDC (Ω) max. IDC (mA) max. 4000 4000 3800 3600 3400 3200 2800 2800 2100 2000 1600 1350 1350 1200 1100 1100 1000 900 800 750 700 600 550 500 450 400 360 330 300 270 240 210 180 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.15 0.15 0.18 0.20 0.22 0.24 0.26 0.28 0.30 0.40 0.50 0.55 0.60 0.65 0.70 0.80 0.85 0.90 1.00 3.00 3.50 4.00 4.50 5.00 5.50 6.00 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 250 250 250 200 200 150 150 50 50 50 (3) RDC: Agilent 4338A/B R-LOG1104A Multilayer Chip Inductors Meeting Your Needs TYPE LL2012FHL 3 ELECTRICAL CHARACTERISTICS Q vs. Frequency Q vs Frequency 100 3N3 80 Q 60 40 20 82N R39 0 10 1000 100 Frequency (MHz) 10000 Inductance vs. Frequency Inductance vs Frequency 10000 R39 Inductance (nH) 1000 82N 100 10 3N3 1 10 R-LOG1104A 1000 100 Frequency (MHz) 1.800.PIK.TOKO 10000 www.tokoam.com 1.847.297.0070