UNISONIC TECHNOLOGIES CO., LTD DTA144E PNP SILICON TRANSISTOR DIGITAL TRANSISTORS (BUILT-IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number DTA144EG-AE3-R DTA144EG-AL3-R DTA144EG-AN3-R Note: Pin Assignment: G: GND I: IN Package SOT-23 SOT-323 SOT-523 Pin Assignment 1 2 3 G I O G I O G I O Packing Tape Reel Tape Reel Tape Reel O: OUT MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R206-051.E DTA144E PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA= 25°C, unless otherwise specified) PARAMETER SYMBOL Supply Voltage Input Voltage VCC VIN IOUT Output Current Power Dissipation IO(MAX) SOT-523 SOT-23/SOT-323 PD Junction Temperature Storage Temperature RATING -50 -40~+10 -30 -100 150 200 150 -55~+150 UNIT V V mA mW mW °C °C TJ TSTG Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA= 25°C, unless otherwise specified) PARAMETER SYMBOL VIN(OFF) Input Voltage VIN(ON) Output Voltage VOUT(ON) Input Current IIN Output Current IOUT(OFF) DC Current Gain hFE Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT Note: Transition frequency of the device. TEST CONDITIONS VCC= -5V, IOUT= -100μA VOUT= -0.3V, IOUT= -2mA IOUT/IIN= -10mA/-0.5 mA VIN= -5V VCC= -50V , VIN=0V VOUT= -5V, IOUT= -5mA VCE= -10 V, IE=5mA, f=100MHz (Note) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX -0.5 -0.1 -0.3 -0.18 -0.5 47 1 250 61.1 1.2 -3 68 32.9 0.8 UNIT V V V mA μA kΩ MHz 2 of 3 QW-R206-051.E DTA144E ■ PNP SILICON TRANSISTOR TYPICAL CHARACTERISTICS Input Voltage vs. Output Current (ON Characteristics) Output Current vs. Input Voltage (OFF Characteristics) -10 -100 Vcc=-5V -5 VoUT=-0.3V -50 TA= 100 25 -40 Output Current, IoUT (mA) Input Voltage, VIN (ON) (V) -2 -20 -10 TA= - 40 -5 25 100 -2 -1 -500m -1 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -0.005 -200m -0.002 -100m -0.1 -0.2 -0.5 -1 -2 -5 -10 -20 -50 -0.001 -100 0 -0.5 Output Current, IoUT (mA) DC Current Gain vs. Output Current -1000 TA= 100 25 -40 200 DC Current Gain, hFE -500 Output Voltage, VOUT (ON) (mV) 500 100 50 20 10 5 -100 -50 -20 -10 -5 -2 -1 -2 -5 -10 -20 -3.0 TA= 100 25 -40 1 -0.1 -0.5 -1 -2.5 -50 -100 Output Current, IoUT (mA) loUT/lIN=20 -200 2 -0.2 -2.0 -1.5 Output Voltage vs. Output Current 1k VoUT=-5V -1.0 Input Voltage, VIN (OFF) (V) -0.1 -0.2 -0.5 -1 -2 -5 -10 -20 -50 -100 Output Current, IoUT (mA) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-051.E