Pericom LR-3.3V 3.3v lvds high frequency vcxo Datasheet

LR Series Voltage Controlled Crystal Oscillator (VCXO)
7.0 x 5.0mm
LR
3.3V LVDS High Frequency VCXO
7.0 x 5.0mm Ceramic SMD
Package:
Product Features
Recommended Land Pattern:
•Frequencies available up to 800 MHz
•<3ps RMS jitter
•Designed for standard reflow and washing
techniques
•Pb-free & RoHS/Green compliant
Product Description
The LR Series 3.3V voltage controlled crystal
oscillator achieves superb temperature stability
over a broad range of operating conditions
and frequencies. The device is constructed
with a hermetically sealed quartz crystal
resonator exhibiting a high-Q for exceptional
performance. The device, available on tape
and reel, is contained in a 7.0 x 5.0mm surface
mount ceramic package.
Pin Functions:
Applications
The LR Series VCXO is an ideal component in
phase locked loop circuits that perform clock
smoothing, clock/data recovery, or frequency
translation and card synchronization functions,
such as:
Function
1
Voltage Control
2
OE or NC
3
Ground
4
Q Output
5
Q Output
6
VCC
Part Ordering Information:
•SONET/SDH/DWDM/E4 timing control &
line cards
LR XXX YYYY
•1 & 10 Gigabit Ethernet and FibreChannel
•Satellite, microwave and cellular base
stations
A: ProductFamily
B: XXX = FrequencyCode
C: YYYY = SpecificationCode
Following the above format, Saronix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
•Server & Storage platforms
SaRonix-eCera™ is a Pericom® Semiconductor company
Pin
•
US: +1-408-435-0800 TW: +886-3-4518888
•
All specifications are subject to change without notice.
www.saronix-ecera.com
LR 3.3V REV2008_DEC04_01.6
1
3.3V LVDS High Frequency VCXO
LR
LR Series Voltage Controlled Crystal Oscillator (VCXO)
7.0 x 5.0mm
Electrical Performance
Parameter
Min.
Output Frequency (F N)
19.44
Supply Voltage
3.14
Typ.
Max.
Units
800
MHz
3.46
V
80
mA
±20 to ±50
ppm
+85
°C
3.3
Supply Current
Frequency Stability
Operating Temperature Range
-40
Output Logic 0, VOL
0.9
1.1
Output Logic 1, VOH
Output Amplitude Differential
Output Load
Notes
As specified
See Note 1 below
As specified
V
1.4
500
1.6
V
900
mV
100Ω +5pF across both outputs
Duty Cycle
45
output requires termination
55
%
measured +1.25 VDC
measured 20/80% of waveform
Rise and Fall Time
0.7
1.0
ns
Jitter, Phase
2.5
4
ps RMS (1-σ)
12kHz to 20MHz frequency band
5
10
ps RMS (1-σ)
10,000 adjacent periods
Jitter, Accumulated
Notes:
1.
2.
As specified. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, shock and vibration. Stability is
inclusive of 5 years aging at 40°C average effective ambient temperature for ordering options A, B, D, E.
For specifications other than those listed, please contact sales.
Frequency Modulation Function
Parameter
Min.
Absolute Pull Range (APR)
±50
Control Voltage Range
0.3
Center Control Voltage
1.32
Typ.
Max.
1.65
Monotonic Linearity
Units
Notes
ppm
See #1 below
3.0
V DC
As rated
1.98
V
For RMT center frequency
%
Positive transfer slope
Input Impedance
50
10
kΩ
Control voltage pin
Modulation Bandwidth
10
kHz
-3dB
Notes:
1. APR is relative to the nominal output frequency FN; APR is inclusive (net) of frequency deviation due to stability.
Output Enable / Disable Function
Parameter
Min.
Typ.
Input Voltage, Output Enable (pin 2)
Input Voltage, Output Disable (pin2)
Max.
Units
VOL
V
or Open
V
Q and Q outputs disable to High Impedance
VOH
Notes
Absolute Maximum Ratings
Parameter
Storage Temperature
Min.
Typ.
-55
SaRonix-eCera™ is a Pericom® Semiconductor company
•
Max.
Units
+125
°C
US: +1-408-435-0800 TW: +886-3-4518888
Notes
•
All specifications are subject to change without notice.
www.saronix-ecera.com
LR 3.3V REV2008_DEC04_01.6
2
3.3V LVDS High Frequency VCXO
LR
LR Series Voltage Controlled Crystal Oscillator (VCXO)
7.0 x 5.0mm
Output Waveform
tf
tr
VOH
80%
50%
20%
VOL
tA
tB
Duty cycle = 100% x (tA) / (tA + tB)
OUT
Vpp
0V (Differential)
OUT
Test Circuit
Test Point
(Termination
internal to scope)
+2.1V
0.1μF
0.01μF
6
5
4
1
2
3
507
507
-1.2V
0.1μF
0.01μF
Output Enable/Disable Function
(OE function present on specified pin)
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-435-0800 TW: +886-3-4518888
•
All specifications are subject to change without notice.
www.saronix-ecera.com
LR 3.3V REV2008_DEC04_01.6
3
3.3V LVDS High Frequency VCXO
LR
LR Series Voltage Controlled Crystal Oscillator (VCXO)
7.0 x 5.0mm
Reflow Soldering Profile
Mechanical Drawing
As per IPC/JEDEC J-STD-020C
Temperature – °C
1 to 3°C/sec max
260
Peak 260°C for 10 sec max
1 to 3°C/sec
217
60 to 90 sec
Time
4 to 6 minutes max
Reliability Test Ratings
This product is rated to meet the following test conditions:
Type
Parameter
Test Condition
Mechanical
Shock
MIL-STD-883, Method 2002, Condition B
Mechanical
Solderability
JESD22-B102-D Method 2 (Preconditioning E)
Mechanical
Terminal strength
MIL-STD-883, Method 2004, Condition D
Mechanical
Gross leak
MIL-STD-883, Method 1014, Condition C
Mechanical
Fine leak
MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s)
Mechanical
Solvent resistance
MIL-STD-202, Method 215
Environmental
Thermal shock
MIL-STD-883, Method 1011, Condition A
Environmental
Moisture resistance
MIL-STD-883, Method 1004
Environmental
Vibration
MIL-STD-883, Method 2007, Condition A
Environmental
Resistance to soldering heat
J-STD-020C Table 5-2 Pb-free devices (2 cycles max)
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-435-0800 TW: +886-3-4518888
•
All specifications are subject to change without notice.
www.saronix-ecera.com
LR 3.3V REV2008_DEC04_01.6
4
Similar pages