High Speed Connectors Series HF601 Flip Type ZIF Connector 90°, SMT (0.50mm Pitch) Specifications Part Number (Details) 500MΩ min. 50mΩ max. 500V AC for 1 minute 50V AC 0.5A -40°C to +85°C 20 times HF601 ** - 02 Series No. Pin Counts (10, 20, 26, 30, 40 45, 50 and 60) Materials and Finish Insulator: Actuator: Contact: - Design No. LCP PA9T Copper Alloy, Au over Ni Non-ZIF Connectors for High Speed Cable Insulation Resistance: Contact Resistance: Withstanding Voltage: Voltage Rating: Current Rating: Operating Temp. Range: Mating Cycles: Features Flip type ZIF connector , SMT Super low profile, height = 2mm FFC/FPC with and without positioning part can be used Packaging tape and reel (1,200 pcs. per reel) Recommended PCB Layout Outline Dimensions for 90° Connector Recommended FFC/FPC Part Number Pin Count A B C D E HF601-10-02 10 4.50 9.70 10.50 5.50 7.10 HF601-20-02 20 9.50 14.70 15.50 10.50 12.10 HF601-26-02 26 12.50 17.70 18.50 13.50 15.10 HF601-30-02 30 14.50 19.70 20.50 15.50 17.10 HF601-40-02 40 19.50 24.70 25.50 20.50 22.10 HF601-45-02 45 22.00 27.20 28.00 23.00 24.60 HF601-50-02 50 24.50 29.70 30.50 25.50 27.10 HF601-60-02 60 29.50 34.70 35.50 30.50 32.10 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors C-9 High Speed Connectors Series HF601 Flexible Flat Cable, 0.50mm Pitch Part Number (Details) Specifications Insulation Resistance: Conductor Resistance. Withstanding Voltage: Voltage Rating: Operating Temp. Range: 1,00MΩ 2.2 Ω / meter 500V AC rms for 1 minute 60V (UL20706) -40°C to +105°C (UL20706) HF601 - F5 - ** - *** - * * - F - * Series No. Pitch: 0.5mm Pin Counts 10, 20, 26, 30, 40, 45, 50, and 60 Materials and Finish Conductor: AU plated Cu Insulation Tape: Polyester, white Supporting Tape: Polyester, blue Insulation Length in mm Total length – 8 mm (2 x stipped lenght) Direction of Supporting Tape A = same B = opposite Features Versions with posistioning part available on request Minimum order quantity may occur 0 = No ears 1 = Ear one side 2 = Ears both sides Plating: F = Au UL-Number V = UL20706/20861 Outline Dimensions Item Description Specification N Number of Conductors 10, 20, 26, 30, 40, 45, 50, 60 P Pitch in mm 0.5mm TP Total Pitch P x (n-1) W Stiffener Width P x (n +1) T Thickness of FFC 0.15mm M Margin Width 0.35mm I Insulation length Total le ngth divided by 2 x S S Stripped Length 4.0mm TT Terminal Thickness 0.3mm H Supporting tape lenght 6.0mm A Conductor width 0.3 +0.05mm b Conductor thickness 0.035 C-10 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER