CLE367 ® High Power Aluminum Gallium Arsenide IRED Clairex Technologies, Inc. April, 2004 0.310 (7.87) 0.290 (7.37) 0.040 (1.02) 0.23 (5.9) 0.06 (1.5) max. ANODE 0.20 (5.05) 0.100 (2.54) nom. CATHODE 0.020 (0.50) sq. nom. 1.0 (25.4) min. ALL ALLDIMENSIONS DIMENSIONSARE AREINININCHES INCHES (MILLIMETERS) (MILLIMETERS) All dimensions are in inches (mm). features • narrow emission angle • T-1¾ (5mm) plastic package • excellent heat dissipation • high power output • fast response description The CLE367 is a AlGaAs infrared emitting diode mounted in a T-1¾ (5mm) water-clear plastic package. The CLE367 features high power output, fast response and a peak wavelength of 850nm. For additional information, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature .......................................................................-40°C to +125°C operating temperature.....................................................................-40°C to +100°C lead soldering temperature(1) .......................................................................... 260°C (2) continuous forward current .........................................................................100mA peak forward current (1.0ms pulse width, 10% duty cycle) ...................................1A reverse voltage .....................................................................................................5V continuous power dissipation(3) .....................................................................170mW notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 1.06mA/°C from 25°C free air temperature to TA = +100°C. 3. Derate linearly 1.81mW/°C from 25°C free air temperature to TA = +100°C. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units test conditions PO Ee VF IR λP BW ΘHP tr tf notes: 4. Total power output 20 40 mW IF = 100mA Irradiance(4) 0.9 mW/cm2 IF = 20mA Forward voltage 1.45 1.9 V IF = 100mA Reverse current 10 VR = 5.0V µA Peak emission wavelength 850 nm IF = 20mA Spectral bandwidth at half power points 30 nm IF = 20mA Emission angle at half power points 24 deg. IF = 20mA Output rise time 20 ns IF(PK) = 100mA(5) Output fall time 40 ns IF(PK) = 100mA(5) Ee is a measure of irradiance (power/unit area) within a 0.444" (1.128cm) diameter area, centered on the mechanical axis of the device and spaced 2.54" (6.45cm) from the lens side of the tab. This is geometrically equivalent to a 10° cone. 5. f = 1kHz, D.C. = 50%. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway. Fax: 972-265-4949 Revised 3/15/06 Plano, Texas 75074-8524 www.clairex.com