Renesas HD74LV05ARPEL Hex inverters with open drain output Datasheet

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
HD74LV05A
Hex Inverters with Open Drain Outputs
REJ03D0229–0700
Rev.7.00
Dec 23, 2005
Description
The HD74LV05A has six inverters with open drain outputs in a 14-pin package.
Low-voltage and high-speed operation is suitable for the battery-powered products (e.g., notebook computers), and the
low-power consumption extends the battery life.
Features
•
•
•
•
•
•
•
VCC = 2.0 V to 5.5 V operation
All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
All outputs VO (Max.) = 5.5 V (@VCC = 2.0 V to 5.5 V, Output “Z” state)
Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
Output current: ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
Ordering Information
Package Code
(Previous Code)
Package
Abbreviation
Taping Abbreviation
(Quantity)
Part Name
Package Type
HD74LV05AFPEL
SOP–14 pin(JEITA)
PRSP0014DF-B
(FP–14DAV)
FP
EL (2,000 pcs/reel)
HD74LV05ARPEL
SOP–14 pin(JEDEC)
PRSP0014DE-A
(FP–14DNV)
RP
EL (2,500 pcs/reel)
HD74LV05ATELL
TSSOP–14 pin
T
ELL (2,000 pcs/reel)
PTSP0014JA-B
(TTP–14DV)
Note: Please consult the sales office for the above package availability.
Function Table
Input A
L
H
Note: H: High level
L: Low level
Z: High impedance
Rev.7.00 Dec 23, 2005 page 1 of 7
Output Y
Z
L
HD74LV05A
Pin Arrangement
1A 1
14 VCC
1Y
2
13 6A
2A
3
12 6Y
2Y 4
11 5A
3A
5
10 5Y
3Y
6
9 4A
GND 7
8 4Y
(Top view)
Absolute Maximum Ratings
Item
Supply voltage range
Input voltage range*1
Output voltage range*1, 2
Input clamp current
Output clamp current
Continuous output current
Continuous current through
VCC or GND
Symbol
Ratings
Unit
VCC
VI
VO
–0.5 to 7.0
–0.5 to 7.0
–0.5 to VCC + 0.5
–0.5 to 7.0
–20
±50
±25
±50
V
V
V
IIK
IOK
IO
ICC or IGND
PT
Maximum power dissipation at
3
Ta = 25°C (in still air) *
Storage temperature
Tstg
785
500
–65 to 150
mA
mA
mA
mA
mW
Conditions
Output: L
VCC: OFF or Output: Z
VI < 0
VO < 0
VO = 0 to VCC
SOP
TSSOP
°C
Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of
which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 7.0 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.7.00 Dec 23, 2005 page 2 of 7
HD74LV05A
Recommended Operating Conditions
Item
Supply voltage range
Input voltage range
Output voltage range
Output current
Symbol
VCC
VI
VO
IOL
Input transition rise or fall rate
∆t / ∆v
Operating free-air temperature
Ta
Min
2.0
0
0
—
—
—
—
0
0
0
–40
Max
5.5
5.5
5.5
50
2
6
12
200
100
20
85
Unit
V
V
V
µA
mA
Conditions
VCC = 2.0 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
ns/V
°C
Note: Unused or floating inputs must be held high or low.
Logic Diagram
A
Y
DC Electrical Characteristics
Ta = –40 to 85°C
Item
Input voltage
Symbol
VIH
Input current
IIN
Off state output
current
IOZ
VCC (V) *
2.0
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
2.0
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
Min to Max
2.3
3.0
4.5
0 to 5.5
Min to Max
Quiescent supply
current
ICC
5.5
VIL
Output voltage
VOL
Min
1.5
VCC × 0.7
VCC × 0.7
VCC × 0.7
—
—
—
—
—
—
—
—
—
—
Typ
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Max
—
—
—
—
0.5
VCC × 0.3
VCC × 0.3
VCC × 0.3
0.1
0.4
0.44
0.55
±1
±2.5
Unit
V
µA
µA
IOL = 50 µA
IOL = 2 mA
IOL = 6 mA
IOL = 12 mA
VIN = 5.5 V or GND
VO = 5.5 V
—
—
20
µA
VIN = VCC or GND, IO = 0
V
Test Conditions
0
—
—
5
µA
VI or VO = 0 to 5.5 V
IOFF
Output leakage
current
Input capacitance
CIN
3.3
—
2.3
—
pF
VI = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.7.00 Dec 23, 2005 page 3 of 7
HD74LV05A
Switching Characteristics
VCC = 2.5 ± 0.2 V
Item
Symbol
tPLH
Propagation
delay time
tPHL
Min
—
—
—
—
Ta = 25°C
Typ Max
4.7 10.4
9.5 15.2
5.4 10.4
7.9 15.2
Ta = –40 to 85°C
Min
Max
1.0
13.0
1.0
18.0
1.0
13.0
1.0
18.0
Unit
ns
Test
Conditions
CL = 15 pF
CL = 50 pF
CL = 15 pF
CL = 50 pF
FROM
(Input)
TO
(Output)
A
Y
VCC = 3.3 ± 0.3 V
Item
Symbol
tPLH
Propagation
delay time
tPHL
Min
—
—
—
—
Ta = 25°C
Typ Max
4.0
7.1
7.3 10.6
4.3
7.1
5.8 10.6
Ta = –40 to 85°C
Min
Max
1.0
8.5
1.0
12.0
1.0
8.5
1.0
12.0
Unit
ns
Test
Conditions
CL = 15 pF
CL = 50 pF
CL = 15 pF
CL = 50 pF
FROM
(Input)
TO
(Output)
A
Y
VCC = 5.0 ± 0.5 V
Item
Symbol
Min
tPLH
Propagation
delay time
tPHL
Ta = 25°C
Typ Max
—
—
—
—
3.3
5.6
3.4
4.1
5.5
7.5
5.5
7.5
Ta = –40 to 85°C
Min
Max
1.0
1.0
1.0
1.0
Unit
6.5
8.5
6.5
8.5
ns
Test
Conditions
CL = 15 pF
CL = 50 pF
CL = 15 pF
CL = 50 pF
FROM
(Input)
TO
(Output)
A
Y
Operating Characteristics
CL = 50 pF
Item
Symbol
VCC (V)
Power dissipation capacitance
CPD
3.3
5.0
Min
—
—
Ta = 25°C
Typ
2.5
3.0
Max
—
—
Unit
pF
Test Conditions
f = 10 MHz
Noise Characteristics
CL = 50 pF
Item
Symbol
VCC (V)
Quiet output, maximum
dynamic VOL
VOL (P)
Quiet output, minimum
dynamic VOL
Ta = 25°C
Unit
3.3
Min
—
Typ
0.3
Max
0.8
VOL (V)
3.3
—
–0.1
–0.8
V
High-level dynamic input
voltage
VIH (D)
3.3
2.31
—
—
V
Low-level dynamic input
voltage
VIL (D)
3.3
—
—
0.99
V
Rev.7.00 Dec 23, 2005 page 4 of 7
V
Test Conditions
HD74LV05A
Test Circuit
VCC
RL = 1 kΩ
CL*
Note: CL includes the probe and jig capacitance.
• Waveform − 1
tr
Input
10%
tf
90%
50% VCC
90%
50% VCC
tPHL
VCC
10%
0V
tPLH
VOH
Output
50% VCC
VOL + 0.3 V
VOL
Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns
2. The output are measured one at a time with one transition per measurement.
Rev.7.00 Dec 23, 2005 page 5 of 7
HD74LV05A
Package Dimensions
JEITA Package Code
P-SOP14-3.95x8.65-1.27
RENESAS Code
PRSP0014DE-A
*1
Previous Code
FP-14DNV
MASS[Typ.]
0.13g
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
F
D
14
8
c
*2
Index mark
HE
E
bp
Terminal cross section
( Ni/Pd/Au plating )
Reference Dimension in Millimeters
Symbol
Min
1
7
*3
e
Z
bp
x
M
A
L1
A1
θ
L
y
Detail F
JEITA Package Code
P-SOP14-5.5x10.06-1.27
RENESAS Code
PRSP0014DF-B
*1
Previous Code
FP-14DAV
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Nom Max
8.65 9.05
3.95
0.10 0.14 0.25
1.75
0.34 0.40 0.46
0.15 0.20 0.25
0°
8°
5.80 6.10 6.20
1.27
0.25
0.15
0.635
0.40 0.60 1.27
1.08
MASS[Typ.]
0.23g
D
F
14
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
8
c
HE
*2
E
bp
Index mark
Terminal cross section
( Ni/Pd/Au plating )
1
Z
7
e
*3
bp
x
Reference Dimension in Millimeters
Symbol
M
A
L1
A1
θ
y
L
Detail F
Rev.7.00 Dec 23, 2005 page 6 of 7
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Min Nom Max
10.06 10.5
5.50
0.00 0.10 0.20
2.20
0.34 0.40 0.46
0.15 0.20 0.25
0°
8°
7.50 7.80 8.00
1.27
0.12
0.15
1.42
0.50 0.70 0.90
1.15
HD74LV05A
JEITA Package Code
P-TSSOP14-4.4x5-0.65
RENESAS Code
PTSP0014JA-B
*1
Previous Code
TTP-14DV
MASS[Typ.]
0.05g
D
F
14
8
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
HE
c
*2
E
bp
Index mark
Terminal cross section
( Ni/Pd/Au plating )
Reference Dimension in Millimeters
Symbol
7
1
*3
Z
bp
x
M
L1
A
e
A1
θ
L
y
Detail F
Rev.7.00 Dec 23, 2005 page 7 of 7
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Min Nom Max
5.00 5.30
4.40
0.03 0.07 0.10
1.10
0.15 0.20 0.25
0.10 0.15 0.20
0°
8°
6.20 6.40 6.60
0.65
0.13
0.10
0.83
0.4 0.5 0.6
1.0
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .5.0
Similar pages