BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier FEATURES • Cavity-free glass-passivated junction • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency • High forward surge capability • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ® ed* t n e Pat *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AB (GL41) TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 400 V IFSM 30 A trr 50 ns VF 1.0 V, 1.25 V TJ max. 175 °C MECHANICAL DATA Case: DO-213AB, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Fast efficient device: 1st band is Green Polarity color bands (2nd Band) BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 UNIT EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G Gray Red Pink Orange Brown Yellow Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 V Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current at TT = 75 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 88581 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER SYMBOL BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G UNIT Max. instantaneous forward voltage (1) 1.0 A VF Max. DC reverse current at rated DC blocking voltage (1) TA = 25 °C TA = 125 °C IR 5.0 50 µA Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance 4.0 V, 1 MHz CJ 1.0 1.25 20 V 14 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance (1)(2) BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41A EGL41B EGL41C RθJA RθJT EGL41D EGL41F EGL41G 60 30 UNIT °C/W Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE EGL41D-E3/96 0.114 96 1500 7" diameter plastic tape and reel EGL41D-E3/97 0.114 97 5000 13" diameter plastic tape and reel EGL41DHE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel EGL41DHE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.5 Resistive or Inductive Load 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 15 10 5.0 0 0 25 50 75 100 125 150 175 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88581 Revision: 27-Aug-07 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor 70 Pulse Width = 300 µs 1 % Duty Cycle TJ = 150 °C 10 1 TJ = 25 °C 0.1 50 40 30 20 10 EGL41A - EGL41D EGL41F - EGL41G 0.01 0.2 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 60 Junction Capacitance (pF) Instantaneous Forward Current (A) 50 EGL41A - EGL41D EGL41F - EGL41G 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Leakage Current (µA) 1000 100 TJ = 150 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 t - Pulse Duration (s) Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB (GL41) Mounting Pad Layout Solderable Ends 1st Band D2 0.022 (0.56) 0.018 (0.46) 0 D2 = D1 + - 0.008 (0.20) 0.138 (3.5) MAX. D1 = 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st Band Denotes Type and Positive End (Cathode) Document Number: 88581 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1