Narrow Band Phase Shifter 50Ω JCPHS-2.5+ 180° Voltage Variable Maximum Ratings Operating Temperature Features -55°C to 100°C RF Input Power 20 dBm max. Control Voltage 20V Permanent damage may occur if any of these limits are exceeded. Pin Connections IN 1 OUT 7 BIAS CASE STYLE: BG419 • low insertion loss, 0.9 dB typ. • good VSWR, 1.2:1 typ. • solder-plated J-leads for excellent solderability and strain relief • aqueous washable -40°C to 85°C Storage Temperature 1.8 to 2.5 MHz +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • radio location • maritime mobile 8 GROUND Phase Shifter Electrical Specifications 2,3,4,5,6,9,10,11,12,13,14 FREQUENCY (MHz) PHASE RANGE (Degrees) Outline Drawing 1.8-2.5 INSERTION LOSS (dB) Min. Typ. Max. 180 0.9 2.7 CONTROL VOLTAGE (V) CONTROL BANDWIDTH (kHz) VSWR (:1) Typ. Typ. Max. 0-18 DC-50 1.2 1.8 Maximum operating power, 0 dBm PCB Land Pattern Typical Performance Data Control Voltage (V) 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) C --- D .100 2.54 E .400 10.16 F .100 2.54 G .100 2.54 H .047 1.1938 J .065 1.651 K .065 1.651 L .890 22.606 wt grams 6.4 Demo Board MCL P/N: TB-62 Suggested PCB Layout (PL-011) VSWR (:1) Insertion Loss (dB) 1.8 MHz 2.2 MHz 2.5 MHz 1.8 MHz 2.2 MHz 2.5 MHz 1.8 MHz 2.2 MHz 2.5 MHz 0.00 27.36 57.85 89.17 118.37 143.18 163.56 180.16 193.88 205.05 0.00 12.96 28.73 48.73 74.58 106.54 142.37 176.76 205.68 227.58 0.00 7.66 16.68 28.00 43.16 64.34 95.00 137.06 184.07 222.53 1.21 1.17 1.13 1.08 1.04 1.03 1.05 1.06 1.08 1.09 1.12 1.12 1.12 1.14 1.17 1.22 1.26 1.29 1.30 1.29 1.36 1.35 1.34 1.33 1.33 1.34 1.38 1.45 1.52 1.54 1.57 1.66 1.80 1.78 1.60 1.36 1.14 0.97 0.84 0.75 1.01 1.16 1.34 1.56 1.80 1.95 1.88 1.60 1.28 1.04 1.00 1.08 1.17 1.30 1.48 1.73 2.03 2.18 1.94 1.51 * Normalized at control voltage = 0V JCPHS-2.5+ PHASE SHIFT JCPHS-2.5+ VSWR 250 1.6 1.8 MHz 2.2 MHz 2.5 MHz 1.8 MHz 1.5 200 100 2.5 MHz 1.3 1.2 50 1.1 0 1.0 0 2 4 6 8 10 12 14 CONTROL VOLTAGE (V) 16 18 0 2 JCPHS-2.5+ INSERTION LOSS 4 6 8 10 12 14 CONTROL VOLTAGE (V) 16 18 electrical schematic 2.5 INSERTION LOSS (dB) 2.2 MHz 1.4 150 VSWR B .800 20.32 PHASE SHIFT (DEG.) A .870 22.098 Phase Shift* (Degrees) 2.0 RF IN 1.5 RF OUT 1.0 1.8 MHz 2.2 MHz 2.5 MHz CONTROL VOLTAGE 0.5 0 2 4 6 8 10 12 14 CONTROL VOLTAGE (V) 16 18 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M151107 JCPHS-2.5+ ED-13078A/1 DY/CP 150817