LUXEON 4014 Compact footprint delivering high-efficacy and just the right amount of light Introduction The LUXEON 4014 low-power product is the first of its kind from Philips Lumileds. It’s a compact 4.0 x 1.4 x 0.7 mm package that delivers the quality of light needed for indoor lighting applications. The LUXEON 4014 offers an ideal solution when uniformity and a smooth lighting appearance are critical in luminare designs. Features Benefits Key Applications • Unique phosphor technology • Enables high efficacy • Indoor area lighting • Rectangular QFN package • Increases uniformity -- Wall grazer • Enables cost effective thermal -- Under cabinet design • Superior heat dissipation -- Flexible lumen and efficacy platform design • For added value and performance roadmap -- ANSI color bin -- Efficacy up to 150 lm/W @ 30 mA LUXEON 4014 Datasheet DS205 ©2014 Philips Lumileds Lighting Company. -- Cove -- Integrated lay-in -- Retrofit lamps -- Refrigerator lighting Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Performance and Characterization Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Material Information & Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Typical Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON 4014 is tested and binned at Tj = 25°C and 30 mA DC. The part number designation is explained as follows: MXZA–BCDD–00EE Where: A — designates minimum CRI (value 8 for 80, 9 for 90) B — designates radiation pattern (value P for Lambertian) C — designates color (W for White) DD — designates nominal CCT (27 for 2700K, 30 for 3000K, 35 for 3500K, 40 for 4000K and 50 for 5000K) EEEE — designates additional part numbers Therefore 4000K, 80 CRI LUXEON 4014 product will be: MXZ8–PW40–0000 Average Lumen Maintenance Characteristics Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that LUXEON 4014 MXZ8-PW40-00 products will deliver, on average, 70% lumen maintenance (L70) at >30,000 hours of operation at a forward current of up to 30 mA.This projection and detailed operating condition will be further validated and disclosed. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 4014 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted material to the LUXEON 4014: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 2 Product Performance and Characterization Guide Typical Product Characteristics at 30 mA and 60 mA Table 1. Performance Characteristics at Tj = 25˚C, If Luminous Flux @ 30 mA, 25°C Luminous Flux @ 60 mA, 25°C Minimum (lm) Typical (lm) Minimum (lm) Typical (lm) Typical 70 10.0 13.0 18 23 2.9 Nominal CCT Part Number Minimum CRI 5000K MXZ7-PW50 Vf at 30 mA 5700K MXZ7-PW57 70 10.0 13.0 18 23 2.9 6500K MXZ7-PW65 70 10.0 13.0 18 23 2.9 2200K MXZ8-PW22 80 8.5 9.7 14 17 2.9 2500K MXZ8-PW25 80 8.5 10.2 14 17 2.9 2700K MXZ8-PW27 80 8.5 10.5 15 18 2.9 3000K MXZ8-PW30 80 8.5 11.0 15 20 2.9 3500K MXZ8-PW35 80 9.0 11.0 16 20 2.9 4000K MXZ8-PW40 80 10.0 12.0 18 22 2.9 5000K MXZ8-PW50 80 10.0 12.0 18 22 2.9 5700K MXZ8-PW57 80 9.5 11.5 17 20 2.9 6500K MXZ8-PW65 80 9.5 11.5 17 20 2.9 2700K MXZ9-PW27 90 8.5 9.0 14 17 2.9 3000K MXZ9-PW30 90 8.5 9.3 14 17 2.9 4000K MXZ9-PW40 90 typ. 10.0 11.1 17 20 2.9 5000K MXZ9-PW50 90 typ. 10.0 11.1 17 20 2.9 Notes for Table 1: 1. Philips Lumileds maintains a tolerance of ±7.5% on luminous flux, ±2 on CRI. 2. Production parts are binned at 30 mA, 25°C. 3. Performance at 60 mA, 25°C is for reference only. Electrical Characteristics Electrical Characteristics of Low-Power LEDs Solder Pad Temperature = 25°C, Test Current = 30 mA Table 2. Forward Voltage Vf [1] (V) Part Numbers MXZx-PWXX Minimum Typical Maximum Typ. Temperature Coefficient of Forward Voltage [2] (mV/°C) DVf / DTJ 2.7 2.9 3.2 -1.6 Typical Thermal Resistance Junction to Solder Pad (°C/W) Ru J-C 45 Notes for Table 2: 1. Philips Lumileds maintains a tolerance of ± 0.10V on forward voltage measurements. 2. Measured between Tj = 25°C and Tj = 110°C. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 3 Absolute Maximum Ratings Table 3. Operating Condition and Ratings Parameter Maximum Performance DC Forward Current 90 mA [1] Peak Pulsed Forward Current [2] 100 mA Soldering Temperature 260°C Allowable Reflow Cycles 3 ESD Sensitivity < 2000V Human Body Model (HBM) Class 2 JEDEC JS-001-2012 400V Machine Model (MM) Class C JESD22-A115C Storage Temperature -40°C - 85°C LED Junction Temperature 125°C Operating Case Temperature 85°C Reverse Voltage (Vr) [3] [4] -5V Notes for Table 3: 1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 80 mA, and the maximum of the current waveform is lower than 100 mA. 2. At 10% duty cycle and pulse width 10mS. 3. LUXEON low-power LEDs are not designed to be driven in reverse bias. 4. At maximum reverse current of 10 μA. JEDEC Moisture Sensitivity Table 4. 2 Soak Requirements Floor Life Level Standard Time Conditions Time Conditions 1 year [ 30°C / 60% RH 168 Hrs. + 5 / -0 Hrs. [ 85°C / 60% RH LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 4 Reflow Soldering Characteristics 300 Tp: 260°C 260°C +0/-5°C 250 Ramp-Up Rate, 3°C/sec. max. 255°C +5/-0°C TL: 217°C Temperature ( C) 200 Tsmax : 200°C tp: 10-30sec. 30sec max. Tsmin: 150°C 150 ts : 60-120sec. tL: 60-150 sec,max 100 50 0 0 50 100 150 200 250 300 Time (seconds) Temperature Profile for Table 5. Table 5. Reflow Profile in Accordance with J-Std-020D. Profile Feature Lead Free Assembly Preheat/Soak : Temperature Min (Tsmin) Temperature Max (Tsmax) Maximum Time (ts) from Tsmin to Tsmax 150°C 200°C 120 seconds Ramp-up Rate (TL to Tp ) 3°C / second Liquidous Temperature (TL ) 217°C Maximum Time (tL ) Maintained above TL 150 seconds Maximum Peak Package Body Temperature (Tp ) 260°C Time (tp ) within 5°C of the specified temperature (Tc ) 10-30 seconds Maximum Ramp-Down Rate (Tp to TL ) 6°C / second Maximum Time 25°C to Peak Temperature 8 minutes Note for Table 5: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 5 Material Information & Mechanical Dimensions MXZx-PWxx Table 6. Material Information Material/Component Specification Lead Frame Base: Copper Alloy Reflector Plating: Ni/Ag Electrode Plating: Ni/Ag Package Body: High Temperature Thermal Plastic Encapsulant: Silicone Resin, with Phosphor LED Chip: InGaN +/- 0.05 Anode Cathode Cathode Marker Figure 1. Package outline dimensions. Notes for Figure 1: 1. All dimensions are in millimeters. 2. General tolerance +/- 0.10. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 6 Characteristic Curves Relative Spectral Distribution vs. Wavelength Junction Temperature at 25°C; Test Current = 30 mA Figure 2. Emission color spectrum for MXZ7-PWxx Relative Spectral Distribution vs. Wavelength Junction Temperature at 25°C; Test Current = 30 mA Figure 3. Emission color spectrum for MXZ8-PWxx. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 7 Characteristic Curves, Continued Relative Spectral Distribution vs. Wavelength Junction Temperature at 25°C; Test Current = 30 mA Figure 4. Emission color spectrum for MXZ9-PWxx. Relative Light Output Characteristics over Temperature Test Current = 30 mA Figure 5. Relative light output vs. junction temperature for MXZx-PWxx. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 8 Typical Forward Current Junction Temperature at 25°C Figure 6. Forward current vs. forward voltage for MXZx-PWxx. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 9 Light Output Characteristics Relative Light Output Characteristics over Forward Current Junction Temperature at 25°C Figure 7. Light output vs. forward current for MXZx-PWxx. Typical Relative Efficiency vs. Forward Current Junction Temperature at 25°C Figure 8. Typical relative efficiency vs. forward current for MXZx-PWxx. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 10 Typical Radiation Patterns Junction Temperature at 25°C Figure 9. Radiation pattern for MXZx-PWxx. Polar Radiation Pattern, Junction Temperature at 25°C Figure 10. Radiation pattern in polar for MXZx-PWxx. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 11 Emitter Pocket Tape Packaging Figure 11. Emitter pocket tape packaging. Notes for Figure 11: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. The maximum number of consecutive missing LEDs is two. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 12 Emitter Reel Packaging 18.4 max 2.0 +0.5/-0.0 180.0 ±0.5 62.5 +0/-2.5 Ø24.0 ±0.5 PART NO: LOT NO: MXM8-PW40-5601 Ø13.0 ±0.2 090430-0136959718 QUANTITY: 1998 CAT CODE: L56X DATE CODE: 1205 12.4 +2/-0 Figure 12. Emitter reel packaging. Notes for Figure 12: 1. All dimentions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. 7 inch reel-3000 pieces per reel. 4. Minimum packing quantity is 1000 pieces. 5. The maximum number of consecutive missing LEDs is two. 6. In accordance with EIA-481-1-B specification. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 13 Product Binning and Labeling Purpose of Product Binning In the manufacturing of LED products, there is a distribution of performance around the typical values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON 4014 emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 6500K emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A= Flux bin (L etc.) B and C = D= Color bin (For example 51, 52, 53, 54, 55, 56) Vf bin Luminous Flux and Forward Voltage Bins Tables 7 and 8 list the standard photometric luminous flux bins for LUXEON 4014 emitters (tested and binned at 30 mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7. Flux Bins Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) 10.0 A 8.5 B 10.0 11.5 C 11.5 13.0 D 13.0 15.0 E 15.0 18.0 Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) S 2.7 2.8 Tested and binned at 25°C, If=30 mA. Tester tolerance: ±7.5%. Table 8. Vf Bins T 2.8 2.9 V 2.9 3.0 W 3.0 3.1 X 3.1 3.2 Tested and binned at 25°C, If=30 mA. Tester tolerance: ±0.10V. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 14 Color Bin Structure MXZ8-PW22 Color Bin Structure 0.450 0.440 0.430 A1 A3 A5 y 0.420 A2 0.410 A4 A6 0.400 0.390 0.380 0.475 0.485 0.495 0.505 0.515 0.525 0.535 x Figure 13. ANSI 2200K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 9. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW22-0000 Emitter Bin Code x y Bin Code x y A1 0.5178 0.5262 0.5154 0.5075 0.4362 0.4381 0.4194 0.4176 A4 0.4996 0.5075 0.4972 0.4897 0.4158 0.4176 0.3990 0.3974 A2 0.5075 0.5154 0.5046 0.4972 0.4176 0.4194 0.4007 0.3990 A5 0.5010 0.5094 0.4996 0.4917 0.4323 0.4343 0.4158 0.4140 A3 0.5094 0.5178 0.5075 0.4996 0.4343 0.4362 0.4176 0.4158 A6 0.4917 0.4996 0.4897 0.4823 0.4140 0.4158 0.3974 0.3957 Notes for Table 9: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 15 Color Bin Structure MXZ8-PW25 Color Bin Structure 0.455 0.445 0.435 2500K 0.425 y 91 93 95 0.415 0.405 92 94 96 0.395 0.385 0.375 0.450 0.460 0.470 0.480 0.490 0.500 0.510 0.520 x Figure 13. ANSI 2500K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 10. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW25-0000 Emitter Bin Code x y Bin Code x y 81 0.4944 0.5010 0.4917 0.4845 0.4322 0.4323 0.4140 0.4137 84 0.4774 0.4845 0.4746 0.4670 0.4134 0.4137 0.3952 0.3948 82 0.4845 0.4917 0.4823 0.4746 0.4137 0.4140 0.3957 0.3952 85 0.4813 0.4879 0.4774 0.4703 0.4319 0.4320 0.4134 0.4132 83 0.4879 0.4944 0.4845 0.4774 0.4320 0.4322 0.4137 0.4134 86 0.4703 0.4774 0.4670 0.4593 0.4132 0.4134 0.3948 0.3944 Notes for Table 10: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 16 Color Bin Structure MXZ8-PW27 Color Bin Structure 0.450 0.440 0.430 81 0.420 83 85 y 2700K 0.410 0.400 82 84 86 2580 0.390 2870K 0.380 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x Figure 13. ANSI 2700K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 11. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW27-0000 Emitter Bin Code x y Bin Code x y 81 0.4625 0.4729 0.4813 0.4703 0.4113 0.4299 0.4319 0.4130 84 0.4446 0.4546 0.4625 0.4520 0.3910 0.4095 0.4113 0.3927 82 0.4520 0.4625 0.4703 0.4593 0.3927 0.4113 0.4132 0.3944 85 0.4468 0.4562 0.4646 0.4546 0.4077 0.4260 0.4280 0.4095 83 0.4546 0.4646 0.4729 0.4625 0.4095 0.4280 0.4299 0.4113 86 0.4373 0.4468 0.4546 0.4446 0.3893 0.4077 0.4095 0.3910 Notes for Table 11: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 17 Color Bin Structure MXZ8-PW30 Color Bin Structure 0.445 0.435 0.425 0.415 71 73 75 y 3000K 0.405 0.395 72 74 76 2870K 0.385 3200K 0.375 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x Figure 14. ANSI 3000K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 12. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW30-0000 Emitter Bin Code x y Bin Code x y 71 0.4386 0.4474 0.4562 0.4468 0.4048 0.4228 0.4260 0.4077 74 0.4222 0.4305 0.4386 0.4298 0.3840 0.4019 0.4048 0.3867 72 0.4298 0.4386 0.4468 0.4373 0.3867 0.4048 0.4077 0.3893 75 0.4223 0.4299 0.4387 0.4305 0.3990 0.4165 0.4197 0.4019 73 0.4305 0.4387 0.4474 0.4386 0.4019 0.4197 0.4228 0.4048 76 0.4147 0.4223 0.4305 0.4222 0.3814 0.3990 0.4019 0.3840 Notes for Table 12: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 18 Color Bin Structure MXZ8-PW35 Color Bin Structure 0.430 0.420 0.410 61 63 0.400 y 65 0.390 3500K 62 64 0.380 3250K 66 0.370 3750K 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x Figure 15. ANSI 3500K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 13. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW35-0000 Emitter Bin Code x y Bin Code x y 61 0.4130 0.4198 0.4299 0.4223 0.3944 0.4115 0.4165 0.3990 64 0.3975 0.4036 0.4130 0.4061 0.3731 0.3898 0.3944 0.3773 62 0.4061 0.4130 0.4223 0.4147 0.3773 0.3944 0.3990 0.3814 65 0.3943 0.3996 0.4097 0.4036 0.3853 0.4015 0.4065 0.3898 63 0.4036 0.4097 0.4198 0.4130 0.3898 0.4065 0.4115 0.3944 66 0.3889 0.3943 0.4036 0.3975 0.3690 0.3853 0.3898 0.3731 Notes for Table 13: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 19 Color Bin Structure MXZ8-PW40 Color Bin Structure 0.420 0.410 0.400 51 0.390 53 y 55 0.380 4000K 52 54 0.370 3750K 56 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x Figure 16. ANSI 4000K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 14. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW40-0000 Emitter Bin Code x y Bin Code x y 51 0.3869 0.3916 0.4006 0.3952 0.3829 0.3987 0.4044 0.3880 54 0.3746 0.3786 0.3869 0.3822 0.3624 0.3777 0.3829 0.3670 52 0.3822 0.3869 0.3952 0.3898 0.3670 0.3829 0.3880 0.3716 55 0.3703 0.3736 0.3826 0.3786 0.3726 0.3874 0.3931 0.3777 53 0.3786 0.3826 0.3916 0.3869 0.3777 0.3931 0.3987 0.3829 56 0.3670 0.3703 0.3786 0.3746 0.3578 0.3726 0.3777 0.3624 Notes for Table 14: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 20 Color Bin Structure MXZ8-PW50 Color Bin Structure 0.390 0.380 0.370 31 33 0.360 35 y 5000K 32 0.350 34 4750K 36 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x Figure 17. ANSI 5000K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 15. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW50-0000 Emitter Bin Code x y Bin Code x y 31 0.3479 0.3493 0.3551 0.3533 0.3580 0.3712 0.3760 0.3624 34 0.3416 0.3425 0.3479 0.3465 0.3408 0.3536 0.3580 0.3448 32 0.3465 0.3479 0.3533 0.3515 0.3448 0.3580 0.3624 0.3487 35 0.3371 0.3376 0.3434 0.3425 0.3493 0.3616 0.3664 0.3536 33 0.3425 0.3434 0.3493 0.3479 0.3536 0.3664 0.3712 0.3580 36 0.3366 0.3371 0.3425 0.3416 0.3369 0.3493 0.3536 0.3408 Notes for Table 15: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 21 Color Bin Structure MXZ8-PW57 Color Bin Structure 0.370 0.360 21 0.350 23 25 y 0.340 22 5700K 24 5250K 26 0.330 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 18. ANSI 5700K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 16. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW57-0000 Emitter Bin Code x y Bin Code x y 21 0.3319 0.3320 0.3376 0.3371 0.3446 0.3565 0.3616 0.3493 24 0.3270 0.3267 0.3319 0.3318 0.3285 0.3399 0.3446 0.3327 22 0.3318 0.3319 0.3371 0.3366 0.3327 0.3446 0.3493 0.3369 25 0.3215 0.3207 0.3263 0.3267 0.3353 0.3462 0.3513 0.3399 23 0.3267 0.3263 0.3320 0.3319 0.3399 0.3513 0.3565 0.3446 26 0.3222 0.3215 0.3267 0.3270 0.3243 0.3353 0.3399 0.3285 Notes for Table 16: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 22 Color Bin Structure MXZ8-PW65 Color Bin Structure 0.365 0.355 0.345 11 0.335 13 y 15 6500K 0.325 12 6000K 14 16 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 19. ANSI 6500K 1/6th color bin structure, forwards current = 30 mA, thermal pad temperature = 25°C. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 17. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXZ8-PW65-0000 Emitter Bin Code x y Bin Code x y 11 0.3158 0.3146 0.3206 0.3213 0.3317 0.3422 0.3481 0.3371 14 0.3119 0.3103 0.3158 0.3170 0.3162 0.3263 0.3317 0.3212 12 0.3170 0.3158 0.3213 0.3221 0.3212 0.3317 0.3371 0.3261 15 0.3048 0.3028 0.3087 0.3103 0.3209 0.3304 0.3363 0.3263 13 0.3103 0.3087 0.3146 0.3158 0.3263 0.3363 0.3422 0.3317 16 0.3068 0.3048 0.3103 0.3119 0.3113 0.3209 0.3263 0.3162 Notes for Table 17: 1. Tested and binned at 25°C, IF=30 mA. Tester tolerance: ± 0.01 in x and y coordinates. LUXEON 4014 Datasheet DS205 20140223 ©2014 Philips Lumileds Lighting Company. 23 Who We Are Philips Lumileds focuses on one goal: Creating the world’s highest performing LEDs. The company pioneered the use of solid-state lighting in breakthrough products such as the first LED backlit TV, the first LED flash in camera phones, and the first LED daytime running lights for cars. Today we offer the most comprehensive portfolio of high quality LEDs and uncompromising service. Philips Lumileds brings LED’s qualities of energy efficiency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retrofit lamps. Our products are engineered for optimal light quality and unprecedented efficacy at the lowest overall cost. By offering LEDs in chip, packaged and module form, we deliver supply chain flexibility to the inventors of next generation illumination. Philips Lumileds understands that solid state lighting is not just about energy efficiency. It is about elegant design. Reinventing form. Engineering new materials. Pioneering markets and simplifying the supply chain. It’s about a shared vision. Learn more about our comprehensive portfolio of LEDs at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2014 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON 4014 Datasheet DS205 20140223