LUXEON 3030 2D Hot color targeted 6V QFN package delivering high flux Introduction The LUXEON 3030 2D mid-power LED is the first hot color targeted mid power LED. The LUXEON 3030 2D uses industry standard packaging and is a 6V surface-mount emitter solution that comes in all ANSI CCTs. Hot color targeting ensures that the LEDs are within color target at 85°C application conditions. Features Benefits Key Applications • Industry standard package • Drop-in replacement for existing • Downlights • NEW 1/9 micro color binning th • Hot color targeted • Leading efficacy of 125 lm/W for warm white and 133 lm/W for cool white at 120 mA and 25°C 3030 LED packages • Hot color targeting ensures that color is within ANSI bin at typical application conditions • Reduced LED count • Enables 3, 4, 5-step MacAdam Ellipse kits LUXEON 3030 2D DS207 ©2014 Philips Lumileds Lighting Company. • High bay and low bay • Lamps Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mechanical Dimensions and Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Recommended Soldering Pad Pattern and Metal Solder Stencil Aperture . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package Dimensions of Tape (Unit: mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package Dimensions of Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Moisture Proof Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Relative Spectral Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON 3030 2D is tested and binned at Tj = 25°C with a drive current of 120 mA DC. The part number designation is explained as follows: L1 3 0 -AAB B 0 0 C C 0 0W2 1 Where: AA — designates CCT (for example, 2700K = 27) BB — designates CRI (70, 80 and 90) CC — designates last 2 digits of 3030 package For example, a LUXEON 3030 2D 2700K 80CRI emitter has the following part number. L130-2780003000W21 Average Lumen Maintenance Characteristics The LUXEON 3030 2D is being tested in accordance with LM-80 standards. Please contact your Philips Lumileds’ TSM or Sales person for more detailed information. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3030 2D is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted material to the LUXEON 3030 2D L130-****003000W21: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 2 Product Selection Product Selection Guide for LUXEON 3030 2D Junction Temperature = 25°C Table 1. Nominal CCT Part Number Minimum CRI [1] Luminous Flux (lm) [1] @ 120 mA Luminous Flux (lm) [2] @ 100 mA Rth_J_c (°C/W) [3] Typical Minimum Typical Typical 2700K L130-2780003000W21 80 77 84 71 3000K L130-3080003000W21 80 85 90 75 3500K L130-3580003000W21 80 82 93 79 4000K L130-4080003000W21 80 84 95 81 5000K L130-5080003000W21 80 86 96 81 5700K L130-5780003000W21 80 87 97 82 6500K L130-6580003000W21 80 87 97 82 12 Notes for Table 1: 1. Philips Lumileds maintains a tolerance of ± 7.5% on luminous flux, ± 2 on CRI. 2. Interpolated value. 3. Thermal resistance is measured junction to case. Electrical Characteristics Junction Temperature = 25°C, Test Current @ 120 mA Table 2. Forward Voltage Vf [1] [3] (V) Part Number Minimum Typical Maximum 5.8 6.1 6.6 Typical Temperature Coefficient of Forward Voltage Between 25°C and 85°C [2] DVF / DTJ L130-2780003000W21 L130-3080003000W21 L130-3580003000W21 L130-4080003000W21 -2.0 to -4.0 L130-5080003000W21 L130-5780003000W21 L130-6580003000W21 Notes for Table 2: 1. Philips Lumileds maintains a tolerance of ± 0.1V on forward voltage measurements. 2. Measured between Tj = 25°C and Tj = 85°C. 3. Forward voltage test tolerance: ± 0.1 volts. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 3 Absolute Maximum Ratings No parameter can surpass its maximum rating under any condition. Care must be maintained to insure junction and case temperatures are properly derated with current. Table 3. Parameter Maximum Performance DC Forward Current 240 mA Peak Pulsed Forward Current 300 mA [1] ESD Sensitivity < 1000V Human Body Model (HBM) Class 2A JS-001-2012 Maximum Case Temperature 100°C Soldering Temperature JEDEC 020D 260°C Storage Temperature -40°C - 100°C LED Junction Temperature 125°C Allowable Reflow Cycles 3 Reverse Voltage -5V [2,3] Notes for Table 3: 1. At 10% duty cycle and pulse width 10ms. 2. LUXEON 3030 2D are not designed to be driven in reverse bias. 3. At a maximum reverse current of 10 mA. JEDEC Moisture Sensitivity Table 4. Level 2 Soak Requirements Floor Life Standard Time Conditions Time Conditions 1 year [ 30°C / 60% RH 168 Hrs. + 5 / -0 Hrs. [ 85°C / 60% RH LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 4 Reflow Soldering Characteristics Figure 1. Temperature Profile for Table 5. Table 5. Profile Feature Lead Free Assembly Preheat/Soak: Temperature Min ( Tsmin ) Temperature Max ( Tsmax ) Maximum Time (ts) from Tsmin to Tsmax 150°C 200°C 120 seconds Ramp-Up Rate ( TL to Tp ) 3°C / second Liquidous Temperature (TL) 217°C Maximum Time ( tL ) Maintained TL 150 seconds Maximum Peak Package Body Temperature ( TP ) 260°C Time ( tp ) Within 5°C of the Specified Temperature ( TC ) 10 - 30 seconds Maximum Ramp-Down Rate ( Tp to TL ) 6°C / second Maximum Time 25°C to Peak Temperature 8 minutes Note for Table 5: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 5 Mechanical Dimensions and Package Information Mechanical Dimensions Figure 2. Notes for Figure 2: 1. All dimensions are in millimeters. 2. Tolerance: X.X: ± 0.1mm, X. XX: ± 0.05mm, X. XXX: ± 0.05mm. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 6 Recommended Soldering Pad Pattern and Metal Solder Stencil Aperture Soldering Pad Pattern Metal Solder Stencil Aperture Figure 3. Package Dimensions of Tape (Unit: mm) Figure 4. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 7 Package Dimensions of Reel Figure 5. Reel dimensions. Package Labeling Figure 6. Label information. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 8 Moisture Proof Package Figure 7. Vacuum sealed and moisture proof. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 9 Relative Spectral Distribution Relative Intensity vs. Wavelength Figure 8. Typical color spectrum. Integrated measurement at solder pad temperature = 25°C, forward current = 120 mA. Relative Flux vs. Temperature Figure 9. Typical relative light output vs. solder pad temperature, forward current = 120 mA. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 10 Relative Flux vs. Forward Current Figure 10. Typical relative light output vs. forward current = 120 mA, solder pad temperature = 25°C. Forward Current vs. Forward Voltage Figure 11. Typical forward current vs. forward voltage, solder pad temperature = 25°C. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 11 Typical Radiation Patterns Radiation in Cartesian coordinate system Figure 12. Typical radiation pattern in Cartesian coordinate system. Radiation Pattern in Polar Coordinate System Figure 13. Typical radiation pattern in Polar coordinate system. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 12 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels for all emitters are labeled with the CAT code following the format below. ABCD Where: A = Flux bin (H etc.) B & C = Color bin (For example 8D, 8E, 8F, etc.) D = Vf bin Luminous Flux Bins Table 6 and Table 7 list the standard photometric luminous flux bins for LUXEON 3030 2D mid-power emitters (tested and binned at 120 mA and a junction temperature of 25°C). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Please contact your Philips Lumileds representative for the supportable flux bins. Table 6. Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) A 50 55 B 55 60 C 60 65 D 65 70 E 70 75 F 75 80 G 80 85 H 85 90 I 90 95 J 95 100 K 100 105 L 105 110 Note for Table 6: 1. Tested and binned at 25°C, If=120 mA. Tester tolerance: ± 7.5%. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 13 Forward Voltage Bins Table 7. Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) F 5.6 5.8 G 5.8 6.0 H 6.0 6.2 I 6.2 6.4 J 6.4 6.6 Note for Table 7: 1. Tested and binned at 25°C, If=120 mA. LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 14 Color Bin Structure The LUXEON 3030 2D is hot color targeted so that at 85°C, the color is within ANSI. Typical bin structure at 85°C In application conditions, the LED temperature rises and at 85°C the typical color bins will be as shown. Note: Bin *N will represent the entire ANSI bin for that corresponding CCT. For example, bin 7N will represent the entire bin for 3000K ANSI. L130-2780003000W21 Color Bin Structure 0.450 0.440 0.430 8J CIE 1931y 0.420 8E 0.410 8D 8G 8H 0.400 8L 8M 0.390 8K 8F 2580K 2870K 0.380 0.370 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CIE 1931 x Figure 14. 2700K 1/9th color bin structure. Table 8. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70° 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 15 L130-3080003000W21 Color Bin Structure 0.445 0.435 0.425 7K CIE 1931 y 0.415 7J 7E 7F 0.405 7D 0.395 7M 7H 7L 2870K 0.385 0.375 7G 3200K 0.365 0.4050.410 0.415 0.420 0.4250.430 0.435 0.4400.445 0.450 0.455 0.4600.465 CIE 1931 x Figure 15. 3000K 1/9th color bin structure. Table 9. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3000K Single 3-step MacAdam ellipse (0.4338, 0.403) 3000K Single 5-step MacAdam ellipse (0.4338, 0.403) 0.00834 0.00408 53.22° 0.01390 0.00680 53.22° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 16 L130-3580003000W21 Color Bin Structure 0.420 0.410 6K 0.400 6E y 6F 6J 6D 0.390 6G 6H 0.380 6L 6M 3250K 0.370 3750K 0.360 0.380 0.390 0.400 0.410 0.420 0.430 0.440 x Figure 16. 3500K 1/9th color bin structure. Table 10. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 53.22° 0.01545 0.00690 53.22° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 17 L130-4080003000W21 Color Bin Structure 0.420 0.410 0.400 CIE 1931 y 0.390 5K 5F 5J 0.380 5E 5D 5G 0.370 5L 5H 3750K 5M 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 CIE 1931 x Figure 17. 4000K 1/9th color bin structure. Table 11. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72° 0.01565 0.00670 53.72° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 18 L130-5080003000W21 Color Bin Structure 0.390 0.380 3K 0.370 3F 3J CIE 1931 y 0.360 3E 3G 3D 0.350 3L 3H 4750K 3M 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 x 0.350 0.355 0.360 0.365 Figure 18. 5000K 1/9th color bin structure. Table 12. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62° 0.01370 0.00590 59.62° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 19 L130-5780003000W21 Color Bin Structure 0.370 0.360 2K 0.350 2F 2J 2E y 0.340 2D 2G 2L 5250K 2H 0.330 2M 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 19. 5700K 1/9th color bin structure. Table 13. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09° 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 20 L130-6580003000W21 Color Bin Structure 0.365 0.355 0.345 CIE 1931 y 1K 1F 0.335 1J 1E 0.325 1D 1G 1L 6000K 1H 1M 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 20. 6500K 1/9th color bin structure. Table 14. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57° 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57° LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company. 21 Who We Are Philips Lumileds focuses on one goal: Creating the world’s highest performing LEDs. The company pioneered the use of solid-state lighting in breakthrough products such as the first LED backlit TV, the first LED flash in camera phones, and the first LED daytime running lights for cars. Today we offer the most comprehensive portfolio of high quality LEDs and uncompromising service. Philips Lumileds brings LED’s qualities of energy efficiency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retrofit lamps. Our products are engineered for optimal light quality and unprecedented efficacy at the lowest overall cost. By offering LEDs in chip, packaged and module form, we deliver supply chain flexibility to the inventors of next generation illumination. Philips Lumileds understands that solid state lighting is not just about energy efficiency. It is about elegant design. Reinventing form. Engineering new materials. Pioneering markets and simplifying the supply chain. It’s about a shared vision. Learn more about our comprehensive portfolio of LEDs at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2014 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON 3030 2D Datasheet DS207 20140318