Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω 1750 to 3000 MHz Maximum Ratings Operating Temperature -65°C to 150°C Power Input (as a splitter) Internal Dissipation CASE STYLE: XX211 Features -40°C to 85°C Storage Temperature BP2U1+ 1.5W max. 0.75W max. Permanent damage may occur if any of these limits are exceeded. SUM PORT 2 PORT 1 8 and Reel Available Tape cost at no extra Reel Size Devices/Reel 7” 20, 50, 100, 200, 500, 1000 2000 13” • blue tooth • IEEE 802.11b, g 5 GROUND +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Pin Connections PORT 2 • wide bandwidth 1750-3000 MHz • good isolation, 20 dB typ. • good output VSWR, 1.40:1 typ. • excellent power handling, 1.5W • low profile • aqueous washable Electrical Specifications 1,3,4,6,7 Outline Drawing FREQ. RANGE (MHz) ISOLATION (dB) fL-fU Typ. Min. 1750-3000 20 INSERTION LOSS (dB) ABOVE 3.0 dB 10 PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) VSWR (:1) Typ. Max. Max. Max. S-Port Typ. Output-Ports Typ. 0.5 1.6 4.0 0.4 1.60 1.40 PCB Land Pattern Typical Performance Data at 25°C Frequency (MHz) Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) C .077 1.96 D .250 6.35 E .220 5.59 F .050 1.27 G .017 0.43 H .009 0.23 J .025 0.64 K .030 0.76 M .050 1.27 N .030 0.76 P wt .270 grams 6.86 0.10 Demo Board MCL P/N: TB-37 Suggested PCB Layout (PL-053) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-1 S-2 1750.00 1800.00 1900.00 2000.00 2100.00 3.42 3.42 3.43 3.43 3.43 3.39 3.38 3.37 3.36 3.35 0.04 0.05 0.06 0.07 0.08 12.10 12.89 14.80 17.29 20.75 0.48 0.49 0.43 0.45 0.41 1.27 1.24 1.18 1.12 1.06 1.50 1.46 1.37 1.28 1.19 1.52 1.48 1.39 1.30 1.22 2200.00 2300.00 2400.00 2500.00 2550.00 3.45 3.48 3.52 3.56 3.59 3.36 3.37 3.40 3.43 3.46 0.09 0.10 0.12 0.13 0.13 26.34 40.24 28.92 22.75 20.76 0.40 0.32 0.32 0.23 0.14 1.02 1.08 1.15 1.23 1.27 1.11 1.05 1.10 1.19 1.24 1.13 1.07 1.09 1.17 1.22 2600.00 2700.00 2800.00 2900.00 3000.00 3.63 3.71 3.82 3.96 4.14 3.48 3.55 3.65 3.78 3.93 0.14 0.16 0.18 0.18 0.21 19.38 17.10 15.46 14.21 13.20 0.16 0.01 0.01 0.27 0.39 1.33 1.43 1.56 1.72 1.91 1.30 1.41 1.55 1.71 1.88 1.28 1.39 1.52 1.67 1.83 1. Total Loss = Insertion Loss + 3dB splitter loss. BP2U1+ TOTAL LOSS 4.4 S-1 4.2 S-2 4.0 3.8 3.6 3.4 3.2 1750 2000 2250 BP2U1+ ISOLATION 50 ISOLATION (dB) B .210 5.33 TOTAL LOSS (dB) A .163 4.14 Total Loss1 (dB) 2500 2750 3000 40 30 20 10 1750 2000 BP2U1+ VSWR 2.2 VSWR 2.0 #S-VSWR #1-VSWR 2250 2500 2750 3000 FREQUENCY (MHz) FREQUENCY (MHz) electrical schematic #2-VSWR 1.8 1.6 1.4 1.2 1.0 1750 2000 2250 2500 2750 3000 FREQUENCY (MHz) ESD Rating Human Body Model (HBM): Class 1A (250 v to <500 v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (< 100 v) in accordance with ANSI/ESD STM 5.2 - 1999 (pass 50V) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. B M151107 ED-12348C/6+ BP2U1+ RS/LC/CP/AM 150618